How to Cut Ceiling Tiles

[@RickyBobbyHill]

This man's mastery was just fed to you on a silver spoon. Years of experience just graced your eyes and ears for free. There should be a 'donate directly to this man's bank account button' in this video. Showing everyone why and how you get paid for what you do is kind of crazy. I hope you were compensated well. Either way... I'm grateful. This video will make my life easier. Thank you

[@joepafuzniak1170]

Excellent video; short, crisp and to the point. It's always great to see "how to do it" videos that stay on topic without a lot of extraneous comments. Well done, and thanks!

[@sfinge5]

BRO! this is one of the most helpful videos for a project that I have ever seen on KZbin, you are the man, thanks very much for sharing!!

[@erniejohnson9182]

Great job!!!!! I've been doing this for 20 years and this guy is 100%correct in his steps a technique.....ive watch 5 videos on guys ways of doing this and this man Is the only 1 that is even close to right...the other tell you to make two measurement 1 for length other for the scribe....thank you I'm glad someone knows what they are talking about...

[@Mik614]

Thank you Wade. Never realized it was such an easy process. And thanks again for the great pointers.

[@delvaacoustic1985]

First guy that actually does a video of the correct way to cut tile ceilings every day! I’ve installed acres of ceilings 👍🏽😂

[@AB-py6jl]

This man is a master of his craft 👏👏

[@Velez8669]

He makes it look easy.

[@8hunnit40third2]

flex1nut it is easy

[@stevecolvin1650]

The best instruction (by far) on how to cut profiled tiles. Cool.

[@bna441]

Perfect. Short and to the point without unnecessary commentary and pontification. Great job!

[@dpelland66]

Great video and instruction. A lot of people would have made this a 10 minute video, but you just got right to the point. Thanks!

[@nigelgoodwin6954]

It’s great to see a real expert who actually knows what he’s doing. Very helpful, thanks.

[@BScatterplot]

Thanks for a short, to-the-point video without a crapload of intro effects :)

[@uppercut70]

So smooth! The blade is the key... our guys butcher the tiles using standard utility blades. Thanks for the tip

[@jjeter1]

Wow! I looked at 6 videos and your video is short and on point.. Your video is better than all other 6! Im so glad I ran across your video! Thank You! 👍🏾

[@andyhiskett3797]

This guy is great. I watched couple other videos this guy made it simple!!! Thanks

[@timstratton9]

dude.. thanks. I know the video is older now.. I love that it is under 2 min and told me exactly what I wanted to know... now im off to mess-up cutting tiles..LOL but at least I know what I should be doing! Thanks.

[@ryline666]

Excellent demonstration man, it does look pretty simple. You're a good teacher, I've learned more in this video that months with my boss to be honest. Cheers!

[@thepottmi]

1:38 video that gets to the point. You are a super hero.

[@eeandersen]

"acres of ceilings" Well done, thanks for such a clear and concise explanation!

[@petervarley3078]

Thank you! It was worth watching this video just to see 0:30 where the tile is scored using the tape measure!

[@merlhemlok007]

Smoothest cuts I’ve seen so far, I’m backing the carpet knife tip

[@Mandeiros]

No BS. Just straight to business! You need to do all tutorials

[@GlitchWitchNyx]

Just what I needed to see to give me the confidence to replace my own tiles. Thank you!

[@mikepaige6216]

Wow, great video… I like the tape measure scoring trick! Short, clear and easy to understand, thank you sir!

[@TheTomar33]

The cuts are very clean. Thanks for making the video.

[@mikedurkee7296]

THANK YOU! It's been a while since you posted this video but came in REALLY useful for this newbie. Much appreciation!

[@andrewest1635]

So Simple! I'm glad that I found this one first!

[@fleetwoodsmash]

A total pro. Thank you, sir.

[@calvinmartinstevens]

That was amazing. Any tips for tiles that go around curved columns?

[@nxsmotorsports]

I wish more videos were like this. A+ execution! Thanks

[@stephenelkins8045]

Great Job Wade. Using these tiles for sound absorption in my broadcast room.

[@skillz785]

Man, this guy knows what's up. 👍😎 From El Monte, Calif...

[@roedee742]

Wow… You make it look so easy 😂… Experience is everything… Thxs Again, great video, thx you !!!!

[@tesseract2365]

Love the video straight to the point and very helpful. I'm cutting my tiles right now.

[@yuanliu1]

very comforting to watch

[@gautamedu]

Made it look so simple. Just to remember that you have put acres before you got to this perfection. Thanks for sharing

[@peterpowers4851]

A true master of his craft.

[@michaelpukmel4776]

Thanks!!! Incredible skill. You make it look easy!

[@vancenguyen4951]

Thanks for the instructions! You make it look easy! 😆

[@bobc7066]

thank you. This is great.. and yes.. it is easy when watching you. more of a challenge on my own...

[@jimulaszek5871]

Great video, and you can tell you have done that a lot!!

[@johnnybombay8076]

Concise and super helpful. Good teacher!

[@mileshearn7404]

Damn he made that look easy!

[@C0llinsW0rth.]

This was a great video, so quick and to the point!

[@ginnieassenza1869]

I'm replacing tiles and the tiles that were there were not done as nicely as this. I'll be more confident cutting my tiles and know they will be cut properly. Great instruction video. Thank you.

[@FallacyDeCuir]

I have NO idea how you make that look so simple. It's not! I wish I could hire you to do mine! lol Thanks for the video.

[@themagicalducklings]

Thanks Wade!

[@CITYBORNDESERTBRED]

Exactly what I needed. Thank you 🙏🏾

[@wadeyearsago]

Short and sweet. Thanks.

[@DeeJay003]

Great video, well explained and demonstrated, and positive. Subbed.

[@adammackerel4993]

Still in awe of the free hand marking with tape and cutting. Like drawing a perfect circle freehand.

[@kingsherrick4528]

If you pinch the tape to the side it'll stay at the length you want. You also typically have a bit of tolerance depending on the grid so you don't need a perfectly straight line just less than like 1/8" off

[@drumharm]

You are an artist

[@enriqueregalado4450]

Wow you make it look super easy

[@rickwalters5066]

Iove this video straight to the point thank God I didn't have to listen about how many cats and dogs exist

[@noneyerbidness]

holy cow, those knife skills. straight as an arrow.

[@Stuygym]

You make it look easy. Thank you!

[@brady443]

Great video!! Quick, informative and to the point. I've been looking for a good video for weeks to make sure I'm doing it right. Finally going to get carpet knife since it's hard to do with a utility knife. Great tip on using your finger as a guide.👍

[@PetePuebla]

You make this look so easy.

[@hollandlevao7718]

Thank you. Needed this for my next job I’m headed to 😁

[@anthonynguyen8031]

Thanks for the tips!

[@stevehinojosa4916]

Thank you!! Made my job easier

[@jomariepiccini2521]

Thank u so much. Very helpful and easy

[@ojwojw]

Thanks great video very helpfull

[@flubberlane8437]

He’s a smiley face 😊

[@cantdriveslo]

Don't really know if it's simple, but you sure made it look simple

[@josephneedhamjr]

Loved your vid, thank you brother....

[@MrSeanh01]

Awsome technique dude.

[@ARGCDG]

That’s how straight to the point video is done.

[@jes1848]

Excellent content! I just have to ask has anyone ever told you that you resemble the smothers brothers

[@justinwoodrum8614]

Awesome job! Thanks for the video.

[@joemartin5066]

My concern was with the shadow line. This video showed the way to do it. Thanks

[@jndwendy]

thank you Wade!

[@matthewmcleod7064]

This guy is ice cold. What a beast

[@rauldc3722]

Thank you for your video

[@henryflores6244]

Simple, during the new construction installation. It’s very difficult to remove and install when you have electrical wiring hvac equipment and other junk in the way. Great video though love how your knife cuts like butter.

[@piotrl.pawlak7851]

Great video! I am struggling on cutting those pieces... Any chance to hire you? I am dead serious.

[@danielrigsby5263]

Dude your awesome man. Quick good video with no bs..lmao

[@stuartjohnston4044]

STRAIGHT FORWARD SIMPLE AND NO FUCKING AROUND. SO MUCH FASTER AND EFFICIENT THAN OTHER VIDEO'S AND ALL IN UNDER TWO MINUETS. THANKS WADE SIDES . : )

[@zyphe]

Using a carpet knife like this guy helped me a lot. For some reason the style of tile I was using would not cut well with a utility knife.

[@89Buffalo]

Nice and straight forward....Thanks

[@symcardnel1741]

Great tips... THANK YOU!!! I've got a question re 'Inserting replacement ceiling tiles around sprinkler heads ' Every time I have to replace a water damaged ceiling tile (2x4, 2x4, etc) (acoustic ceiling panel, acoustic ceiling tile) it's a major struggle finagling the new tile up into the grid while getting the sprinkler head thru the tile hole. It's extra extra difficult, if not impossible, when: - head happens to be close to grid or tight to grid corner - very little room above grid (ie: duct work, pipe, etc) Is there a trick that I'm not aware of? I googled the following and NOTHING comes up?? "how to insert ceiling tiles around sprinkler heads" "ceiling tiles around sprinkler heads" "how to replace ceiling tiles around sprinkler heads" "replace ceiling tiles around sprinkler heads" Any and all assistance is greatly appreciated!

[@jayn8392]

So how would recommend marking very heavily textured drop tiles? When I try an mark by scoring I can never find my marks again because of how "Rocky" the visible surface is. I have never felt with drop ceilings and just signed on with a maintenance crew that are a total clown show and have no clue what they are doing, so I'm sure there is a better way to do it than how they have been showing me. We have been marking on the backs of the tiles because it's smooth. Also there is so much texture that trying to recut cut the edges where it seats on the rails and drops down is absurd because the stuff just disintegrates and leaves really rough edges. Idk if you have any tips but the building flooded so it looks like my life is these awful tiles for awhile.

[@eldeefitty4473]

How to do it this easily: do it a lot until it's this easy lol Great video

[@nOt24seven]

Thanks! Very helpful 😊

[@crfatbysmita2127]

Thank you so much sir 🙏

[@hectorrivas4275]

What's the price for replacement each one.?

[@OldsXCool]

My drop ceiling doesn't have shadow lines. I really wish it did, it looks much better. Thanks for this video.

[@Driver732]

Thanks for the video, I was prepared to use this method and realized my new ceiling tiles don't have that lip around the edges. Ended up using a multi tool and it was cake.

[@IBITZEE]

damn,,, you make it look so easy... ;-)

[@pault477]

What is a shadow line

[@Ayd2222]

Can you paint the tiles with a spray gun?

[@LD-uz5pc]

Do ceiling tiles like this contain asbestos?

[@josephneedhamjr]

Make a vid on how to set up the grid

[@Marty_McFatty]

Thank you sir.

[@gus.plus.g]

Thank you!!!

[@wadesmith666]

Great name Wade, by me Wade

[@redlense4]

Wow man, Thx!

[@318lotis]

thanx for the tip.

[@BrentSends]

You can also use a shadowline cutter

[@sharonmanetta7685]

mines all crazy..now i cant fit the bars back in...you dont happen to live in michigan do ya? lol