how to cut plexiglass

[@commrad10108325]

Thankyou for the video... One thing that bothers me about it though socks with flip flops

[@3daypriest]

commrad10108325 ..... Those may be tabi socks. Japanese socks with a separate area for the big toe. They match the rubber soled, cloth shoes worn by carpenters. Some socks even have separate areas for each toe. Warm in the winter.

[@linarush1393]

Yulp bothered me not sure why but it did

[@fieldtorus2170]

Shoobie

[@alabama-1958]

😂😂😂😂😂

[@elguanatos13]

🤣🤣

[@funtimess2995]

cutting Plexiglass on horse rather on a flat surface and then using a knife with free hands to deepen the cuts and mess it up......just brilliant work skills!!!

[@emmyjoyful1]

not

[@annmarieball7105]

So is it a specific kind of razor or knife? lol was too busy staring at the socks with flip-flops...

[@brittanilong3675]

we just going to ignore the "so if I wasn't married" and "your alot more fun than I thought" 😂 ...

[@MisterFinny]

Brittani Long yeah that's why I read comments I wanted to see if he got busted on the comments if I wasn't married boooy she'd cut it off

[@richpotter]

"I should have scored it a little bit better!" Good object lesson.

[@mrajczyk]

a man who takes pride in his work

[@tavanskicelovjek9874]

one should never risk going to a bachelor party without a sheet of plexi

[@DBuilder1977]

Why do people downvote this video? I found nothing wrong with it. +1 from me.

[@Savior-ml4pq]

Delphi Builder socks with sandals most likely

[@GhettoRanger01]

Do you feel qualified to give lessons while doing something for the first time?

[@DBuilder1977]

@@Savior-ml4pq LOL!!!! Just noticed!!

[@Savior-ml4pq]

GhettoRanger yes I do!

[@GhettoRanger01]

@@Savior-ml4pq Obviously, but you really aren't.

[@zeppy13131]

You're obviously using a utility knife first-but what kind of knife is the 2nd one? Details, dude.

[@yucasola]

I made my mother-in-law's casket using this method; hope she uses it soon 😀

[@andrewbarker8631]

Lmao

[@azuro1125]

Very informative. Ignore the tools commenting on your feet.

[@UapArkansas]

What about cutting inside corners or just shapes in general?

[@sandwichman100]

pretty much how to do it if you don't care how good it looks run the risk of cutting yourself by running your bare hand down the fresh edge wear flip flops so you can injure your foot/feet as a bonus actually this could be a video for how NOT to cut plexiglass

[@winstonenglish285]

You people don't know something from nothing!!!! can't you see those are safety socks and anti-slip non trip multi grip flip-flops

[@tirichinesalim2970]

Thanks for the vidéo , i've a question if i Can yo yoused the chain saw in order to cut or not .

[@freedomfyter]

Nice wavy line there partner.

[@Detroitson1933]

So what are you using?????? What kind of knife what make how many scores do you make???

[@Gorilla_Jones]

How do you do curves?

[@coreytrevor5533]

More like how not to cut plexiglass.

[@junkintwin]

How would u cut plexiglass? I got a piece. But can’t afford to screw it up lol

[@Stavroguine826]

@@junkintwin Like this kzbin.info/www/bejne/qXfMl5apnLyelcU You use the non cutting edge of the cutter. You make a few passes just on one side of the plexiglass ( from one edge to the other ) and... clack !

[@danmyers7877]

You know he got in trouble after posting this video "So your saying if I wasn't married"😅😅

[@hdogwar2471]

easy peezy. Very helpful.

[@craycrayeats7138]

Very nice method

[@ovc242]

great work! you look like you have done this before.

[@marquisesherman7276]

What size is this ?

[@sikanderbhagat8950]

7 fit sheet kya rate hai

[@rainmaker5692]

How to cut plexiglass - smash Shane McMahon’s head through it

[@hachmiboualem8339]

Toop

[@AmodKasvan]

Kya parice hai

[@Cognitiveleaper]

What is the purpose of your video?

[@nae1252]

I wanted to hear the rest of the gossip “so you’re telling me if I wasn’t married”…. 🗣️ what?! What happened next?!

[@Pauls-workshop]

talking about moving to a warmer climate

[@DavidDL]

Thanks man

[@jacobkemper3524]

Thanks! Now just stop the socks with flops

[@ditavalerio615]

That's thick too

[@samueltola9717]

Grazie del video ... Ma ti prego non presentarti con calze e infradito!!!!!😫

[@francescobruno1954]

Ninja cut

[@lifehackersgamingboyen4083]

you have hand sweat

[@antisatan7]

Wtf is wrong with sandals and socks!? Fuck society!

[@Pauls-workshop]

doing something in the garage and you know that you don't put boots on just for a quick cut.

[@ryanpatterson5448]

Socks and sandals

[@johnnysalami8617]

Socks with flops, do better man 😂

[@WillY1905]

That was predictable

[@fartyhands9323]

Socks and flip flops. *shudder*

[@ram43x80]

R u kidding me!! Find a better way!

[@clownworldpa]

Crooked as f

[@roccofalegname]

Belle scarpe antinfortunistiche che hai!!!

[@hennylos4656]

This is not how you cut it . Just saying .

[@Unknown-lh4kl]

Looks pretty cut to me 🤡

[@billmoore7133]

You really shouldn't be making videos about things you have not idea how to do correctly, or title it correctly "How not to cut Plexiglass"

[@bobberguy1]

Excellent video how to NOT cut plexiglass.

[@dannyroach554]

soooo...i need a razor blade,a level,clamps and some goofy ass flip flops over my socks and i can make a horrible cut in plexiglass?thanks!this was utterly useless

[@cabronesk]

lololol

[@robotmad]

LMFAO LOL

[@rasmeymao53]

Danny Roach hahaha!!!

[@dublinbluetune]

Sometimes, the funniest videos are the ones that are not meant to be funny at all. And the comments are just as good also. Thanks for cheering me up!

[@ianutube22]

From what I've read on line most fine tooth power saws can cut plexiglass for most needs.

[@michellepaz7502]

I think Your first scoring was good enough. If you used that leveler that I saw in the beginning to hold down the other side, along the score line, you will have gotten a good snap.. I just kind of did this, using two wooden yardsticks, one on each side and got the cleanest snap.. thanks for the video I know it was forever ago ,but if you didn't know at this moment socks and slides seem to be the thing now.lol

[@IMEMINE.]

No support No snap

[@joyfuljeff9128]

One score is good enough when it comes down to glass but plexiglass is a little different because it's plastic and it might not break right there on that line

[@paulharding1972]

Cutting perspex can be so tricky. Many times I've spent 10mins trying to cut perspex for picture frames and right at the end when I'm snapping it off it doesn't snap correctly and ruins the sheet that I can't use anymore.

[@ephraimlatson]

Now Enter the "professional" plexi cutters..🙄..Everybodys a critic....lol

[@lescobrandon546]

What a flamer. He wears socks with flip flops

[@rugbyeddie]

Socks and sandals loool

[@VarietyGamerChannel]

This only works 1 times out of 10. I ruined $90 worth of plexiglass this way once.

[@trevorbyron9448]

How bout cutting in curves eg. For a vehicle side window

[@richardbuxton3546]

Good demonstration - and I'm cool about the socks versus flip flops - a matter of personal taste... I had difficulty following the spoken commentary though - what language was it?

[@fthrust]

Richard Buxton He is on a telephone, there is no commentary.

[@richardbuxton3546]

fthrust What then is the mouse-like squeaking at the beginning?

[@TheMonthlyJack]

Richard Buxton It's being sped up.

[@mrajczyk]

+Richard Buxton it was chipmonk

[@holfeightyeight3375]

table saw usually works pretty good.

[@ShippuudenSeries]

Goddamn! So many people in these comments wanted to see dude without socks 🧦!!! Freakin’ foot fetishists. 🙄

[@adamxie8245]

Yea what a epic fail I go through five times then snap it

[@afifa6984]

Plexiglass umbrella. please .

[@CaptRich-bi3gp]

Are you doing a video or talking on the phone? I saw what you did but didn't get any instruction. It kind of looked like maybe you didn't know what you doing; I don't know...?

[@gloup81]

good job for a chipmunk !

[@KyleJonesedit]

how thin is that sheet?

[@conceptionrabe2797]

Don't bother telling us the name of the tool you are using, or anything. That would be too obvious.

i feel this is some kind of abstract video

[@richardjeuring]

put painterstape on both sides and take a jigsaw or cirklesaw make sure the cutting line is in the middle of the tape.

[@gregc.9313]

BS This doesn’t work. Just tried it. Ruined two whole sheets.

[@tylerl4472]

@@gregc.9313taping and circular saw or a table saw has worked for me everytime I tried. You might need a different blade

[@jayb2344]

So did this the other day and got way too many fractures than I wanted. Couldn’t find my rotatory so I used a hot knife

[@mrshawterry6]

Hey Sir, you did'nt tell he how to cut it, i'm just kidding sir, i pay attention, that was did real nice.

[@RicAlba1]

I just want to know the story of the phone call.

[@sweetgyy]

you have a peculiar voice and my cat wants to meet you!

[@31acruz]

There's gotta be an easier way. Maybe they sell a plexiglass cutter.

[@verounbhim3631]

So how was the bachelor party?

[@TheChrissyholmes]

incoming....tool using tools lol

[@mikespikedog5293]

Never works for me always breaks off the mark

[@asherasherko8606]

You should learn more man 👨 sorry to tell that

[@aryhanibrahim1082]

2024 right now😂

[@cardarmor2338]

So is this how not to cut?

[@wabashstudio]

what the fuck did I just watch?

[@oceanic8424]

Can’t beat a table saw, or circular saw with a carbide saw blade for clean cuts on acrylic (plexiglass), or polycarbonate (lexan).

[@jay1984man]

Just use a saw already

[@Jillian1stJohn3-9-10]

My DIY idea to let my Cat come in and out of my sliding glass door from my apartment. I can buy a 20X16 piece Plexiglas for $2. Cut it into 4 strips and it'll be perfect, cheap, and easy.

[@kirankothule9156]

Mala paje 5*5=3

[@MySynopsisLife]

thick?

[@joemug4079]

Got it.

[@RHG412]

Useless.

[@noahwilson7513]

Should be titled: How NOT to cut plexiglass

[@MrMohamedxy]

(y)

[@CatMomForever]

No one mentioning the commentary in the background?

[@sazidmalik7273]

Sar is shet ko kya bolte hai or kha milege or kitne rupe foot milege

[@PaganWizard]

Try talking to your audience instead of someone on the phone.

[@saeedalqahtani926]

Thank you for this teaching video❤

[@alexmedina7266]

AYE. Leave the socks and sandals out of this.. lbs

[@tannercampbell8027]

This guys wearing socks with flip flops

[@randmayfield5695]

Clamping down a level may not be a good idea. I'd use a sheet rock square or a length of metal.

[@MobileDecay]

Cheating on your wife huh? ^_^

[@geoffreypark1954]

Oh gawd socks flips and stepping on pants backs triggered

[@jakeqwaninne8502]

you should have left the straight edge on to break the cut against

[@lucilinabillar403]

Did u sale that here in the phil? How much per 4x8

[@colleen9580]

Thanks, i was going to do it without the clamps