[HOW TO]CYMA CM.060 P90 SMG DISASSEMBLY - INTERNAL REVIEW

[@Kristoff0402]

been waiting for this Pheas :) keep up the great work, though the safety intro could be shorter, or leave a timestamp to skip it

[@9080rigaxe]

Why don’t you rebuild them on camera ? I would pay to see you trying to put these guns back together. They would be comedy gold 😂😂😂. Do the p90 first 👍👍👍

[@PheasAirsoft]

I didn't even know it was something people wanted to see. I'll put a poll out on the community section of my channel and if it's what people want to see then I will happily include a "reassembling" section in the disassembly videos. Pheas

[@ArchieKeen1]

I agree with you on TM a lot of manufacturers are still producing AEGs that are mechanically identical to the original TMs released in the 90s (I.e. cyma 028), they just done a really good jobs and it’s hard to top the basic design of them

[@billstrachan4531]

wow i didnt realize how easy it is to access the gearbox for the p90

[@jadsairsoft2351]

what length motor is in the p90?

[@adrianiacob1991]

This toy actually was able to over-hop easily .28 BB's. With this weight the hop is about 60% engaged to hop them straight, meaning it is room for more. After a thorough barrel cleaning no issues with accuracy and consistency, at least in semi-auto. I did not requested a downgrade in power, and this little thing sits right in UK DMR limits - 425-430 FPS with .2 BB's, which is way too hot for this little toy. But the gearbox is surprisingly well shimmed - no play at any wheel and no grinding noises - and I would not hurry to open it very soon to throw in a weaker spring. For all new owners info, a proper bedding in for this toy you get after a barrel cleaning an a good 200-300 BB's put through. And another thing, I really had big issues placing in the 9.6 volt battery the replica came with, so from the beginning I was using a 8.4V from a CYMA AK. I did not want to force the cables with stock cover and run into electrical issues.

[@PheasAirsoft]

Hiya. Thank you for the "out of the box untouched" information. Crazy how high the FPS is out of the box. Pheas

[@adrianiacob1991]

@@PheasAirsoft It was actually opened and checked by TaiwanGun techs, but what they wrote on the paper was less than the what I chrono'ed with same CORTECH X3200 cronograph.

[@PheasAirsoft]

@@adrianiacob1991 I have found the same recently, that my chrono is showing higher than what they have said it is. Pheas

[@telucylu9348]

the wear on the spur gear is probably because of the anti-reversal latch, which is a common problem for V6 gearbox since the AR latch is right above the spur gear and very likely to touch each other, I've tried to shim the AR latch a bit higher and it basically solved the issue

[@ithinkartisfun2897]

why was it taken off taiwangun?

[@mtbbiker6401]

I purchased the licensed one in the USA. It has the same numbers on the gearbox shell 06-01A but all the bushings are round, not oval like the one in this video. Also the trigger is a little different. It has an adjuster plate that allows you to adjust the position of the trigger bar. I assumed it is made by CYMA but maybe not since it's a little different.

[@telucylu9348]

Your compression parts are so Lmao hahaha (there is... almost no compression), I just got mine CYMA P90 and I will take down the gearbox soon, but straight out of the box it shoots around 410FPS which is a bit hot, curious about my compression parts and see how the hell those parts let bbs fly 410FPS, anyway nice vid bro!

[@NepaAirsoft]

I sold off all my P90s. Love to get another one, but cash is not my friend right now.....

[@Beowulfis1]

The ring on the barrel on mine is glued, any idea how to get it off?

[@PheasAirsoft]

I would apply some gentle heat (hair dryer) whilst allow using adjustable grips to turn it. Pheas

[@alvareichon]

Could be helpful if you analize if some parts are from v2/v3 gearbox, like the tapper plate, or the cilinder head. Love your vids ❤️

[@kort7367]

Will putting a longer barrel (the goldish color actual barrel) improve range/accuracy? Along with perhaps a better hop-up?

[@isaacshively6705]

I owned the same P90 and I put a Guarder upgrade kit in it with a ProWin hop up, a Promy tight bore and Promy purple rubber, and a ASG 30k and it was a great gun but I never liked the trigger I really wish CYMA or another brand would revamp it with a quick change spring guide like the old King Arms P90's and add a micro switch trigger maybe even a short stoked gear set because they make great CQB guns but I sold mine to a buddy that was getting into airsoft and he's been using it for 3 years now

[@atanasmilanov9251]

Hello. How do you remove the muzzule

[@PheasAirsoft]

Hello, it unscrews clockwise (it's a negative thread) there may be a set / grub screw holding on also what needs to be loosened or removed. Pheas

[@valentine4287]

That gives me a pretty good idea where mine has gone wrong, think my nozzle is goosed, good to see they've changed the hop unit a little since mine was made too, mine is a god awful white one an it doesn't put on as much pressure as yours

[@StrmyCZ]

I would need that video 2 months ago when i was fiddling with my P90 from CYMA.

[@kriss3401]

I've upgraded the nozzle, barrel, piston head, bucking, and another part of the hop up Are theses good upgrades? It's so I get very good compression and I'm trying to get more accuracy

[@PheasAirsoft]

Sounds like you have done basically what anyone else would have done with it! So good choice., As for the accruacy, all down to the barrel and hop rubber and hop unit quality and might be a case of changing things about until you hit that sweet spot you are happy with Pheas

[@ryanloynes8528]

Waiting 6 days it’s been killing me pheas 6 days is too long 😂😂 but yes as always great video pheas 👍🏻

[@quickshot_1575]

Great vid! Could you do a review on the specna arms sa-h21?

[@ryanloynes8528]

Waiting 6 days it’s been killing me pheas 6 days is too long 😂😂 but yes as always great video pheas 👍🏻

[@macpherson14765]

anyone know any replacements for the two small screws on the button to release up upper receiver and the spring that is on the barrel (to connect the "chamber" to the charging handle springs)? they flung to all hell during assembly, and now i cant put my gun back together. please let me know i cant find any replacements.

[@PheasAirsoft]

oh god! good luck with finding new ones... the only suggestion I could come up with is to go to the local hardware store and see if they have anything that looks remotely similar. Gutted for you! Pheas

[@n30g3netical4]

heya, cool video, it helped me allot, but can you find replacement parts ? the barrel of my P90 broke and i need to replace it but i could not find any site that could help me find the part. Could you please advise me on this ?

[@PheasAirsoft]

Hello! Sorry to hear it has broken! Just to check first.. do you mean the inner barrel? Pheas

[@FinnishUncleSam]

Just got mine. Unfortunately the aftermarket battery I bought for it came broken. (Ipower 9.6V 1600mAh p90 type NiMh) Now I wonder if the battery that comes with it even fits the stock and also if the battery will even work.

[@PheasAirsoft]

Hiya. The included battery should work ok, shame about the aftermarket one though. Hope they are replacing it for you Pheas

[@FinnishUncleSam]

@@PheasAirsoft i got the stock battery to work but it was so tight fit that it peeled the rubber layer of the wires so that the copper wires were revealed. Yikes. Had to put some electric tape on it. Hopefully that will last.

[@skepticalpianist3266]

How do you disassemble the mag release?

[@PheasAirsoft]

Unfortunately I don't have this anymore to be able to do a video about it! Sorry! Has yours broken? Pheas

[@steviegers]

What motor do you recommend for upgrade

[@PheasAirsoft]

Hiya. I have been using the Kublai high speed motors from taiwan gun and they have been awesome so far! well worth the investment. But any high speed short shaft will be a drastic improvement over the standard one that is included. I hope that helps! Pheas

[@lucasmiller4104]

What length is the motor

[@PheasAirsoft]

Hiya. I have only just realised I haven' mentioned this in the video. They are a long type motor fitted into these. Pheas

[@lucasmiller4104]

@@PheasAirsoft thank you pheas

[@mitchfromtheinternet297]

Fuck me! 🤣🤣🤣🤣 That was a horror show, release the bloody spring pressure before cracking the box open! Also all P90s use a long type motor... I mean I’m surprised you couldn’t tell, you looked right at the bloody shaft... also look at the distance between the motor housing and the bevel, even if you’d never taken apart a P90 it’s obviously a long. 🤣 Jesus lad, some master teching going on right here, when’s the DSG build vid coming out. 🤣

[@Sarss_]

This video has been a lot more helpful to me than this comment will ever be, regardless of the two mistakes he made. Criticism is fine but you don't have to be a dick about it.

[@mitchfromtheinternet297]

@@Sarss_ you found this useful? In the land of the blind, the one eye’d man is king I suppose. 🤣