How To Deal With Stripped iPhone Screws...100% Working

Thank you for watching!
Website( Mail-ins & Contact) : www.phonerepairguru.com/
Second Channel: / @prgrepairtutorials2526
Ask a Question (Join the Subreddit): / phonerepairt. .
My Repair Tools:
Tools and Organizer www.wrepair.com (Discount Code PRG5 for 5% Off Entire Store)
Display / Battery Programmer amzn.to/3kRi949
Tools Used amzn.to/3r9gibN
Qianli Clamps amzn.to/3eSoXL5
My Blue Mat amzn.to/37vGW6V
Ifixit Starter Kit amzn.to/2UJfvTq
Heat Gun amzn.to/2UL23hJ
Electronic Screw Driver amzn.to/3j00sgr
Filming Gear:
Lumix GH5 amzn.to/3o4pfmP
Rode Wireless Go Mic amzn.to/3GewsqI
Rode VideoMicro amzn.to/3r7p5Ng
Studio Lights amzn.to/3AI44vD
Spinning Thing amzn.to/3AI5Exz
Guru Approved:
Easy Button amzn.to/3rZASfI
Gameboy Case amzn.to/3KQcAgT
MagSafe Cooler amzn.to/3r6G95X
Nutella AirPod Case amzn.to/3KTmfDE
Giant AirPod amzn.to/3rVwfn4
Nano Leaf Lights amzn.to/3KS0zYs
Anker MagSafe Charging Stand amzn.to/3IKmQFK
Framed / Disassembled iPhones Display xreart.com/?ref=l0076ztwht
Social:
Check us Out on Instagram / phone.repai. .
Or on TikTok / phonerepairgu. .
Phone Repair Guru assumes no liability for any damage caused to your phone as a result of any of the information contained in this video.
Do not attempt unless you are open to the possibility of further damaging your device.

[@GlowBerryPlayz]

did someone notice the new like animation for the like button? Absolutely beautiful 🤩

[@CamcorderHomeVideos]

Genius Comment!

[@andythetom4775]

No way that mad fire

[@John-yv9lu]

agagaga

[@Coco-Loco]

Where? I can't see it

[@_Haadi]

@@Coco-Loco thats the point, there is no new animation, its just a trick to make you press like to find out if there is one lol

[@KitsukiiPlays]

“Often the rubber band trick won’t cut it”. Boi, oh I know! I can remember the full rage

[@Paco8478]

What is that trick?

[@alessioacri.]

@@Paco8478 pure time wasting material LOL

[@flamingkillermc2806]

@@alessioacri. Yeah but at least it works, just apply a bit of pressure and twist

[@riley_621]

@@flamingkillermc2806 I've never gotten that to actually work

[@flamingkillermc2806]

@@riley_621 So you have to get a bit that is not too sharp or it will go right through the rubber band. Then you narrow it down right on top of the stripped screw and press with medium to hard pressure not to hard it something will break. Then you twist

[@Ameerjanan]

Sure got these laying around

[@meetdeath]

If you don’t then why bother opening up an iPhone?

[@Ameerjanan]

​@@meetdeathI'll whoop yo ass it's a year later

[@qwertyqwertperson]

it fix it? @@meetdeath

[@AC-fv7kt]

Love how the screw was already elevated when using....😂

[@xcatpatrolx]

its a stripped screw. i've stripped screws before and you usually can get it out just a bit

[@jonescrusher1]

how?@@xcatpatrolx

[@wheelbarrow74]

@@xcatpatrolx not mine

[@QuiveryNut]

@@xcatpatrolxyeah not too sure about that one, unless it’s been stripped due to cross threading and was never quite fully in. I’ve found that cleaning the screw and the driver w alcohol and using a bit of superglue on the tip of the driver will get that screw out every time. Let it sit for about a minute (only seconds with activator) and you’ll almost always get it out

[@amoghtyagi3341]

a wise youtuber once said: "if you screws don't have wedges, create your own wedges"

[@ImSumGuy]

I just line up my smallest flathead, give it a good tap to get a workable groove, and that usually does it for me without another tool

[@bruhboi6941]

I am literally think it this guy keep buying broken phone in low prices and keep fixing this guy gonna be a billionaire in no time

[@adrillaa]

Lol

[@TheRealYashNotFake]

He’s repairing peoples’s phones

[@sheehanroy4001]

Rest in peace, this guy's English 💔

[@baragon023]

But what do you do when they're flush against the frame and not halfway sticking out, allowing access to the shaft without marking the phone with the grinder?

[@mikaboo2521]

I think the soldering method would be best in this case.

[@salmonii3239]

Never thought I’d see a video about stripping and grinding on this channel, but the more you know

[@johnv50]

Hey can you send the link for that grinding pen?

[@datgamerboy123]

You can run into this anywhere! I've run into it in the automotive industry many of times!

[@therealsnowwhite1937]

It was mentioned in a Cycle World issue when a reader asked about how to deal with gummed up screws on a motorcycle engine. One such trick involves tilting a screwdriver at a certain angle then tapping it until the screw gradually loosens up.

[@datgamerboy123]

@@therealsnowwhite1937 for a flat head screw/bolt, I can see this working many times, but for Phillips head, Torx, and Hex, not so much. Direct impacts head on with a stubborn screw/bolt works many times as well.

[@puffinondasticky]

the newer model stripped screws are hell 😂old ones u could just break them out

[@CPD_scratch]

Very useful my cousin will need it

[@niko5008]

Something i did a long time ago was putting solder on the screw, and right after put the screwdriver, let the solder sit and unscrew. Just that, if you are unscrewing on plastic... please wait for the thing to cool down. You might ruin some gameboy case.

[@boyindica]

I actually have one right next to me should i try it

[@julio8010]

Man ive been waiting for new videos on the other channel. Pls ♥️♥️♥️

[@dagmont4605]

Ok, what if the screw is actually recessed?

[@chayvelez4210]

Omggg thank u so much, u just help me tremendously…. I didn’t have a grinding pen but I did it w my nail drill. Thank u for sharping this technique 🙏🏻

[@xX12VincEXx]

How is the name of the tool? I only know the big ones ;)

[@Smallz95]

grinding pen

[@senkyasrita]

I did it everyday

[@rushilkisoon]

🥲🥲🥲what if it’s countersunk, and flush to the bottom as it would be normally?

[@bluedogtransportwa]

Shhh he cant get internet clout by being wrong

[@PanDiaxik]

Sometimes soldering a copper wire to it can help or just glue something to it with epoxy

[@frognutz0o]

What? you mean not 90% sticking out to where its possible to just unscrew with your fingers?

[@eliadbu]

I would say your best luck is trying to find some very small screw extractor

[@Worthy_Edge]

Use a knife to get the screw out as much as you can

[@HD-wf3bp]

That smart mate! I'll surely use this method!

[@williamsanborn9195]

"Often the rubber band trick won't cut it." Buddy, you don't even KNOW how many times I've tried the rubber band trick only to find the screwdriver had poked a hole through the rubber band. 😤

[@marianbadea369]

What of the screw isn't raised above the body of the phone, like in your video, so that you can cut it? I have one! 🤪

[@QualityDoggo]

Those pen grinders are great and can be found for like $20

[@Mingodough]

you know where to find them?

[@flameboss555]

​@@Mingodoughtry search- ir x6 mechanic+ not same as the video but video provide by the company show that you can do the same as this video.

[@raymondhanna7792]

But most likely the screws are really deep

[@emdeedania]

Hey bro. How you doing man. All good?? So I'm a technician too but I specialise on Android phone. I don't know is it would be kind for your to do a full course about iPhones, honestly I appreciate the good work man. Big time💙

[@marleycameron9637]

wow that looks really safe 😁

[@Mike-we3rb]

I just bought a grinding pen but it only came with the circular saw blade pieces. And diamond bits. Does anyone know where to find the attachment he used

[@JoCaTen]

Interesting but what if the screw is deep inside and not outside with plenty of surface to grind it? Not sure how to phrase it but I'm sure I'm understood

[@M0DFATH3R]

Best solution I’ve seen

[@TheAlvarito99LoL]

Thank youu!! i asked for the same thing like 2 weeks ago.

[@surronsterr0]

Keep up the good work 👌

[@TheChessGod64]

What is IC baseband

[@arioxoxo666]

also “U” shaped extractor tool also work well!

[@collageboy9309]

nice videos.I have a Question what is your favourite device

[@peterschloglhofer7117]

Literally happened to me today...

[@alexmares9562]

What tool is it?

[@ptfsndsw7028]

Screws are usually just below the surface of the body. You scratched the trim on the body of the phone, and the screw was already out some, raised above the surface. When you started taking the screw out, you either covered the scratch or it was a different phone.

[@darklinggolem]

I wish I knew this video when I was trying to repair my iPhone 7 Plus Screen The Home Button screw got stripped and I could not get it out, I had to bend the metal bracket to pop the home button out

[@ProGamusian]

If this happens, I usually just end up grabbing a large Philips screw bit and going at it until it gives. Works most of the time

[@conflict3511]

I know its been a year but what size Philips

[@lewiscalvert5439]

@@conflict3511i think this dude was joking about the Philips head

[@DisiUndDas]

The Chad move here is to put the flathat screw back into the iphone.

[@ryansantiago941]

What if the screws aren’t protruding like in this video?

[@jks3093]

There’s nothing that’s worth your time trying I’m afraid.

[@mysticgaming6752]

Hey bro remeber me love jr content it'd really helping

[@randomairsoftkid]

My dad and me do this all the time when we round the bolt

[@pranavaggarwal4779]

Hi , cant you change display of older iphone's (xr or 11 or 12) with an iphone 13 one? Why not? And is there any possible way to do so?

[@yankee92scope]

If u pull the screen up a big u can force push the screw out as well

[@sheroblue3495]

What’s that tool called that is used to cut it?

[@mythical8732]

Hey man i have an idea for ya. You can so tutorial classes in youtube or google and get paid for it im sure every body want to know how to fix phones

[@thierrybobbsemple3902]

I love his screwdrivers where can I find or buy them from

[@chen2win]

I have one of those too, I sometimes do it for my repairs too

[@ChickenTheFunky]

Where can I get this amazing tool ? 😍

[@chen2win]

@@ChickenTheFunky Search for grinder pens, the cutting heads are important, I’m sorry I can’t give more details, they keep getting deleted

[@vales.3682]

How did you start your tech repairing service?

[@shikarjaglall4643]

My screen works certain times but most of the time when u touch the screen nothing happens and it does its own things like pull the notification shade down or open random apps

[@nullsleeps]

well i dont have a grinder i'm stuck in hell

[@FakeExotic]

Lmao he smashed it

[@fpv.kid1012]

Challenge: can you ad mag safe to the moto g power

[@JahmareeBanks]

That slam tho, poor iPhone 🤣

[@LyokoWarriorCreator]

A gold Iphone just chillin, is that a Caviar?

[@gtxgamer8048]

Can you do redmi with a magsafe

[@SimonStuff2000]

What if you chip the plastic??

[@PhoneRepairGuru]

Small price to pay for success

[@Odedaraprakash]

Which brand screwdriver are you using ?

[@skellybones5119]

I curious on what the rubberband method is

[@smechu9437]

Where you buy parts for phones

[@AceSolomon94]

Link to the grinding pen?

[@clutchgodsaustintrentham6719]

Love the Pablo escobar iPhone 12 Pro Max 😂 if you know you know

[@MalikHall]

Where did you get that grinding pen?

[@amazingaustinyesitsanallit6891]

Hello i was wondering what screw driver set i should get because i am gonna start fixing phones

[@freakycolo]

Hey do you know how to fix laptops?

[@JamieRobert_]

Now you’ve scratched the phone lol

[@ninjabendyloll4526]

Hey can you help me with my ps4 for some reason my controllers won't connect also you're the best mechanic I know and the best youtuber 🙂

[@silviumatei1070]

Hi, Do you think that the internal components of an Apple Watch can be moved to a demo case? Thx!

[@xXx_milkz_xXx]

Where u get that tool I need to know

[@akshayswaminathan9467]

Where can I get that grinding pen

[@priyam453]

What if I don't have the cutter

[@kormatoes3485]

Just done this on a 11 board 🤲🏻

[@thenightcompanion3339]

Link to grinding pen.

[@myronsnagg5857]

Where did u order your pen and what’s the name of it

[@clothinghanger6978]

What about if the screws are not backed out at all yet?

[@PhoneRepairGuru]

There are smaller tips for the grinding pen. That or you can put something to protect it.

[@adamneulander]

Do you charge more if they’re stripped?

[@emmanuelmorales1443]

What if its flat on the motherboard and the grining pen might damage the motherboard?

[@crunchylicenseplates9008]

That’s an mechanics trick, however I like to see you do it with the welding torch method instead.

[@BladeoftheImmortal2005]

Please tell me what grinding pin that is. I need it.

[@Ethlix]

I have a question when ur below 10 percent is that ok?

[@vale8059]

Witche glue do you use to glue the glas down

[@Mike-we3rb]

I’m a mechanic. Try taking out a bolt with 100ft lbs of torque with a torch. Even with a torch it sometimes doesn’t do it

[@derrick6198]

Man oh man things that sounds so easy and fast but then he says grinding pen

[@jethrodavao.-sectionc9995]

As a mechanic, I recommend welding a rod on top. 😂

[@fahdsaleh91]

Screw the frame too right?

[@spork4980]

what is that grinding thing called?

[@HYDRAxVIPER4]

You can also unscrew it with the help of rubberband and ofcourse screwdriver 🙂

[@abdulkarimqureshi4680]

4th time asking 😣: I’m 15 and I want to turn screen replacement etc into a business where can I go to buy cheap but good quality screens preferably for iPhone 6, 7 and onwards. Also any other advice for ppl like me.

[@sarac9424]

If this is your 4th time asking here's a hint. The question is too broad. That's placing a lot of burden on the person being asked, to give a lot of info with very little direction and that in itself could be a very long video. If you're genuinely interested in doing that, put in the hours of research to look into all the options out there and find what would fit your business model. You might find the reason you're not finding answers is because it is either hard to do, not available, not plausible, or underresearched. Either way you either have to adjust your question to be more specific, try forums rather than asking one single person on the KZbin comments, adjust the business model to adapt to what resources you can find, and invest your time to figure this all out. Starting a business is hard and a lot of work goes into it before it ever starts. That means answering a lot of your own questions. I'm not trying to come across as rude or harsh, but the emoji you used is giving the impression that you are disappointed and expectant of an answer the first time you asked. It's not a fair thing to expect an answer to such a broad question, especially when it's entirely possible he never even saw it in the first place. Either do the legwork yourself and learn the intricate details you need for the business or start volunteering/working at tech repair shops to build experience and discover resources you'd need. No one is going to give all the answers you need in one go, because if they had all the answers they would be doing it themselves or don't want to help create a bunch of competition. I hope you find the answers and resources you need for it

[@KenjiKim]

Actually you can put another screw and solder i do it usually

[@christianvalencia3931]

What is the rubber band trick im just asking because i don’t know what that is

[@DavidGarcia-oi5nt]

Lol as a mechanic this one really hurt my brain

[@khilaadimusic]

Where should i get this pen

[@rqofficial_gaming3865]

Bro which is the best site or app to buy iPhone 5s /6s under low budget

[@youngmuhammadali7060]

Has someone ever disrespected you while doing business or being rude?

[@blobhead7]

it will be more awesome if the grinding pen has stripped screw remover bits

[@cyntheaqaqish]

Never thought that’s possible to do

[@PhoneRepairGuru]

Hope your doing well :)

[@E-hab]

That's what I do with big screws also.

[@olrickylo-zv5sx]

I just saw a crushed iPod while was walking home from school