How to Design Any Shed (SketchUp Tutorial) | Walls, Door, Window

  Рет қаралды 7,404

Mr. Lower

Mr. Lower

Күн бұрын

Пікірлер: 17
@senfo-s5p
@senfo-s5p 2 жыл бұрын
Just a minor, but important comment about doing a 16" OC layout: The very first 4x8 sheet of drywall (or whatever you finish your walls with) doesn't start in the center of the 2x4, so it's important the very first stud start at 15¼" rather than 16". Said another way, you want the leading edge of the first stud to be 15¼ from the very edge of the sill plate, and the CENTER of it should land at the 16" mark. The way you did this would place the leading edge of the first stud at 16", rather than having the center of it at 16". ¾" might not seem like a big deal, but failing to start from this point is going to throw off all of the subsequent studs, which will result in all your sheets of drywall (again, or whatever you use to finish your walls) failing to fall on the center of your stud without cutting them. Save yourself some agony and place your very first stud at 15¼", then every 16" thereafter. I found this more difficult to explain that I hoped it would be, so hopefully this makes sense. Thank you for the tips working with SketchUp, by the way. I found this very useful.
@MrLower
@MrLower 2 жыл бұрын
I understand exactly what you mean, and have had to deal with that issue myself IRL. I will make sure to account for that if I ever have to teach this lesson again in the future.
@mckenziepg
@mckenziepg 2 жыл бұрын
Your videos not only help one learn more about how to use SketchUp but also how to build sheds while taking certain key points into consideration, thank you for passing on your knowledge and expertise.
@richwahneEXPERTSmadeEasy
@richwahneEXPERTSmadeEasy 2 жыл бұрын
Great video series!! One more use for the California Corner - backing for drywall in each corner at the end of each wall.
@coop5868
@coop5868 Жыл бұрын
This is so freaking helpful. I learned so much!
@KAasifandAssociates
@KAasifandAssociates 3 жыл бұрын
Too good it is 😍😍😍
@MrLower
@MrLower 3 жыл бұрын
Thank you! I designed this as a training video for students, so feel free to use it as such!
@gailsovick
@gailsovick Жыл бұрын
We’re having trouble creating the 2x4 studs. Every time we use the rectangle tool to create the shape of the 2x4 and then use push-pull to pull it up, it connects the 2x4 to the base plate so that they’re all one piece. Any tips for us?
@MrLower
@MrLower Жыл бұрын
Of course! It sounds like you haven't turned the base plate into a component yet, and it's still just open geometry. When you go to draw a rectangle on open geometry it's like you're adding to that shape, which is nice if you want something complex, not so much if you want separate parts. When you finish the base plate (or any other object), triple-click to select the whole thing, right-click and select "make component". Making something a component basically encapsulates it within it's own container and prevents it from being edited directly, unless you double-click on it and then you can edit it again.
@CesarMartinez-rp6oh
@CesarMartinez-rp6oh 2 жыл бұрын
When I select my stud to rotate for the california it grabs both studs and distorts how canI make sure each stud is its own standalone item
@MrLower
@MrLower 2 жыл бұрын
If I understand correctly, your stud deforms instead of rotates - this probably means that the stud you made was not turned into a 'component', and is just a free piece of geometry. If you make the first stud you build into a component (triple-click to select the whole thing, then right-click > make component) then your stud will be a contained piece that can be rotated without deforming. If instead you build two studs together without making them into components as you go, then they will be welded together as one giant Franken-Stud monster. It is always advisable to make geometry into components as you go, plus its easier to copy/paste so you don't have to keep re-building the same piece. Hope this helps!
@wisconsinwoodsman1987
@wisconsinwoodsman1987 2 жыл бұрын
Wouldn't you want to stagger the joints on the plywood floor?
@MrLower
@MrLower 2 жыл бұрын
I don't think it would add any structural benefit for such a small shed, but it would make planning out the floor frame and cutting the plywood slightly more work.
@amjadkhan-tz8qi
@amjadkhan-tz8qi 2 жыл бұрын
@@MrLower You could just swap the larger and smaller pieces of the middle "column"
@Petes-Page
@Petes-Page Жыл бұрын
we call cripples "Noggins" in the UK ..great series by the way.. u
@tianwang
@tianwang 3 жыл бұрын
Sheddy shed!
@MrLower
@MrLower 3 жыл бұрын
If you're having a tough time learning fractional measurement, check out my favorite measuring tape by FastCap: (Affiliate link) amzn.to/3h5725u
How to Design any Shed (SketchUp Tutorial) | Roof
28:13
Mr. Lower
Рет қаралды 6 М.
How To Design any Shed (SketchUp Tutorial) | Floor
18:54
Mr. Lower
Рет қаралды 19 М.
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
How To Use SketchUp Tools 2021 | Woodworkers
32:48
Free Online Woodworking School
Рет қаралды 48 М.
Wood Wall FRAMING in SketchUp (No Extensions)
1:36:47
SketchUp
Рет қаралды 71 М.
Using SketchUp To Design Woodworking Shop - New Shop Part 1
23:38
Bent's Woodworking
Рет қаралды 41 М.
98 - Learn SketchUp in 20 Minutes - Complete Sketch Up Tutorial of a Coffee Table
25:53
Creating Wood Framing in SketchUp - The SketchUp Essentials #42
13:02
TheSketchUpEssentials
Рет қаралды 278 М.
Getting Started with SketchUp Video 1
29:25
April Wilkerson
Рет қаралды 503 М.
How to Make a Shed in SketchUp
40:16
Webb Tutorials
Рет қаралды 36 М.
How to Build a Shed - SketchUp Tutorial
51:34
Webb Tutorials
Рет қаралды 26 М.