How to Diagnose a Car Wheel Scraping Noise: Brakes or Dust Shield?

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@union1082]

I have a similar noise not when turning but after driving and breaking a little and only from one tire in the rear. Its a constant sound and goes away while braking and at high speeds, could this be the same issue didn't want to get my roters changed if I didn't have to.

[@tech_curiousx9z41]

@@union1082 Did you ever figure it out? It seems like I have a problem similar to yours. I went to a Firestone shop for an inspection and they said they couldn't find anything wrong.

[@TheDarkestForce]

Funny how you can explain to a mechanic that has 25 years experience that you hear a scraping noise from the front brakes and after he takes off the wheel and inspects them visually... finding NOTHING wrong and charges you $60.00 bucks you then come to KZbin and in literally under three minutes can find out what the problem is! Thanks for the video.

[@1AAuto]

+MCR Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@carlosgalvan2174]

Yup! I saved my friend about $1000-$400 (parts and tools) replacing thermostat and brakes on Infiniti G37. The quotes were ridiculous! 😂

[@mcronn1002]

Man I thought my brake pads were grinding my rotors. But I found out it was the dust shield. And my mechanic did exactly what you did. It was really a relief. Thank you for your videos.

[@spanieaj]

I was having this issue with my kid's car. My daughter told me she was hearing scrapping noises coming from the left front wheel. I pulled the wheel off and inspected the calibers and rotor. Everything looked ok. When I looked at the shield, it was obvious that it was making contact with the rotor. I bent the shield away from the rotor. I was relieved that it was an easy fix at no cost.

[@edubb2491]

...awsome🙏 that my 16 honda accord ..that my wife jus bought is the same result!!

[@davidweum]

Gus Grey.. Thanks for sharing your experience. I talked to my mechanic because I cannot locate my go to "shade tree"/"back yard: mechanic.

[@coolbeans2345]

Mine is probably the same but my brakes are also shaky and squealy so i know i have a bit of work to do

[@livenotonevil8279]

Can it be accessed without removing the wheel?

[@EidelmanVids]

I had the same issue, but have one additional concern. Do you think that this issue can affect your cars range? Because my lexus rx that is supposed to get 365 miles on a full tank, only made it 265 miles. Now I inspected the dust covers and noticed a hole rubbed through the rear right cover. After bending it back, the notorious sound is gone. But I am curious if i can expect an improvement in how far i can drive on a full tank.

[@phillipyoung3250]

I just replaced a brake caliper and a brake hose of my wife’s car and then began hearing this awful scraping sound. Turned out I bent the dust shield into the rotor! I just used the spare tire pry hook to bend the rotor back in the circle k parking lot and now I’m very happy I watched your video

[@099JOEY]

Thank you! I just got done replacing sway bar links on my chevy malibu. I took it for a test drive and immediately I could hear an awful scrapping noise coming from the front, it got worse with speed so I turned around to go back home (assuming the worst) before causing further damage. Found this video and instead of taking my tires off again I just took a flathead and pushed on the dust shield through the rim all the way around both front tires then drove it again and sure enough the noise was gone. This video saved me a lot of problem solving.

[@Andrew-rb4gs]

It pays not to jump right to the most expensive, worst case scenario in your mind before bringing your vehicle to your mechanic. Great video guys.

[@gosia68usa]

Thank you! That noise was driving me crazy! Every mechanic told me something different was wrong with the car. You saved me lots of money. Thank you again.

[@1AAuto]

+Margaret Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@livenotonevil8279]

@@1AAuto Is it imperative to remove the wheel?

[@knightghaleon]

I just had my breaks and rotors done two weeks ago and was hearing this thinking I somehow got scammed into paying for used brakes and rotors. Turns out it was just this so I bent the dust shield with a screw driver and man this was perfectly timed. Thanks so much.

[@1AAuto]

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Levant

[@alicedad6171]

Holy F I just did my brakepads at the dekaler and two days after this noise started. Im gonna go out and see if i can fix this too

[@celticlightning9703]

Glad you guys made that point about the dust shield and rust on rotor. That's one that nobody else has mentioned. I'm having intermittent rubbing noise from front driver side and have changed the wheel bearing, new brake pads and still it persists just not as bad. So I have notice the dust shield and rust on the outer perimeter of the rotor. So, that's my next idea.

[@1AAuto]

+Brian Gibson Thanks for the feedback!

[@booJay]

Did you find this to be an easy fix for your problem? My back right tire is making rubbing noises too and it's driving me nuts.

[@cookedasparagus]

thank you sooo much for your help

[@TycoTyrannus]

Also check to see if your lug nuts are on firmly. That happened to me once. Back wheel was making a grinding sound. Went to check for debris or hindrances and found the lug nuts were coming loose. Wow... and lucky it made noise.

[@BLIQUEMIST26]

Yes mine keep getting stolen so I’m getting locks since I need 2 anyway. I had a person change my tire and it the lug nuts was loose same noise

[@perrywilchiuk6012]

If your steering wheel is shaking, that could be happening with a front tire. Fyi for the future.

[@noelghallager4672]

Another reason for this type of noise is that upon getting new tires, sometimes the weights used on the inside of the tire rim used to balance the tire can rub against the brake parts. This just happened to me on my Honda CR-V. The weights were rubbing up against the brake pad retainers and causing a horrible scraping noise.

[@perrywilchiuk6012]

You're a fn genius. Thank you!!!

[@superdow]

After changing the cv axle with no results, I figured out that it was a corroded rotor rubbing against the dustplate and metallic tips of the brake paid retainers.....I've been doing my own suspension repairs for decades and never before has this happened (perhaps because I usually change rotors when I change brake pads)! This video is a good tip that I haven't seen anywhere else! This tip should be mentioned in all of those other videos dealing with bad bearings and cv joints. My issue started on a 2015 nissan versa with 42K as a very slight clicking noise that was worse when i turned the car to a particular side. Same symptom as a bad cv axle. Within a few weeks it morphed into a loud scraping sound, especially on turns.

[@1AAuto]

Thanks for the feedback! +superdow

[@mattbite]

This was super helpful. Mechanics wanted to change almost all suspensions parts, because I was having similar issue. Simple army knife fix at no cost solved the problem :)

[@1AAuto]

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@opannefrank1986]

Mechanics are, by and large, crooks. Make sure you learn a thing or two about basic car maintenance. I'd never want to be at the mercy of a lawyer or a mechanic; they both have one mission: bilk you for money by any means necessary.

[@Dexion845]

Yup I had the same symptom after putting in front struts. When I jacked the knuckle to prevent too much CV joint stretch I must have bent the dust shield also. 5 minutes and a screwdriver and problem solved

[@pattybaselines]

Hell ya!

[@Lsbud]

@@opannefrank1986 I totally agree. Thanks for posting that.

[@livinglife4309]

Just had this problem and the clips that hold the pads were slightly over sized so we ground them down but not enough on the passenger side so the clips on the outer side were rubbing on the rotor causing a squealing or high pitch noise. So make sure to check the clips that hold the break pads.

[@aaronhoppy9557]

My wife didn’t drive her Forester for a week.. immediately had this same sound from both front wheels. Brakes had just been checked 2 weeks ago and were fine. Couldn’t figure out where the problem was. I watched this video then went out and fixed this exact issue in 5 minutes. Didn’t even have to remove the wheel.. I was able to see the shield touching the rotor through the wheel spoke. Thanks for the great video!

[@1AAuto]

+Aaron Hoppy Thank you! We love empowering our viewers and showing how to perform DIY auto repairs!

[@aaronhoppy9557]

@@1AAuto Absolutely, I'll definitely be utilizing your online store for parts from now on!

[@1AAuto]

+Aaron Hoppy Thanks so much, we appreciate it!

[@duncanotema]

This is a very helpful video. It just saved me a lot of headache and mechanic extortion. Thanks, thumbs up for you.

[@miserylovesmycompany8908]

I just watched this, you saved me money man.. I was just about to go get ANOTHER CV joint. Just replaced it last year.

[@tonyneufeld6860]

I have used the 1A Auto videos for so many repairs over tue last few years. Thank you folks so much, with the money saved from repair bills I have been able to buy tools for the jobs and still save money

[@1AAuto]

+Tony Neufeld Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@RyTheFly]

This channel is awesome! I was fearing my driver side wheel was needing some work. Turns out, it just needed a little help is all! Thank you so much, new sub!

[@1AAuto]

+Ryan Bayne Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@jonnelsonjdn]

Thank you for saving me hundreds of dollars (and time dealing with a repair shop)! I was able to fix it without even removing the wheel! I just took a flashlight and a long screwdriver and pushed back the shield a little through the wheel. No idea why this has downvotes, it's a good suggestion.

[@1AAuto]

+jonnelsonjdn Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@jonnelsonjdn]

@@1AAuto I'll definitely check out your site the next time I need parts!

[@GionnoRoman]

In some cases, Because the dust shield is made of aluminum, over time the bolts will eat through the aluminum causes the dust shield to dangle. Regardless of how you bend it it will still scrape. In this scenario you will need a new dust shield

[@ScrappleCheesesteaks]

This is EXACTLY the same sound I am hearing right now on my 2012 Nissan. Front driver side wheel, only makes this sound when I turn right. Wow, I'll take a look at this tomorrow. If it is as simple as this, I will be a very happy man! Thanks for the video.

[@nalsra0]

Did you figure out the issue?

[@nickoster2577]

You guys do some of the best auto repair videos on KZbin

[@1AAuto]

+Nick O Thanks for checking us out!

[@Kysersosa1002]

Hi jumping on here because my son was having issues with his camry and I started having this issue with my Jeep. You guys have saved my son and I $$$ in repairs. I buy from you guys because of this. Would it be easier to shop via Amazon? Sure, but I don't trust chinese steel and questionable parts. I know shopping with you guys I'll get what I need 1st time, right every time thusfar. Thanks for this video and all your tips. I've replaced door handles, a rear suspension to include subframe, exterior and interior lights thanks to your short tutorials. Keep up the great service and work!

[@ScrappleCheesesteaks]

*Update - I cannot thank you enough. This was indeed the problem! That thin metal shield at 0:54 was slightly bend in as I looked from bottom to top (even just touching it with the screwdriver mimiced the same noise I was hearing) Just pried it out a bit, knocked some corrosion off it also, few shots of compressed air. The God awful annoying sound when I turn right is finally gone! Thanks so much, I was fearing this was some major issue.

[@1AAuto]

+ScrappleCheesesteaks Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@Mirecsooor]

Hi ! I believe that your video actually solved my problem, I hit a curb sideways yesterday and above 60mph I can hear some noise around front wheel, not sure which side, but I believe your video solved my problem, will check tomorrow morning! thanks !

[@Benjy9845]

Mine was doing this scraping after having new brake discs and pads, so I have just ripped off the dust guard. Will have to buy a replacement but at least I can drive now without causing any more damage 😊

[@MyAIPlayground]

Exactly what I needed! Thanks!!! Man I wish KZbin was around in my younger day.

[@1AAuto]

+@MyAIPlayground Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@DavidVanBuren1]

Solved my issue on 2003 Explorer. Brakes still good. Thanks for the video. I'm buying my parts in the future from you just because of this video.

[@wendys390]

Wow, that's exactly what I needed to see, because that fits the noise I'm getting. Now I know what to check! Thank you!

[@Pantherman63]

Thank you for sharing this info with your viewers. That scraping sound is a lil like how my rear brakes sound on the right. Part of me was thinking they were gritty from dust that blows about in our cul-de-sac complex, and the accumulation was causing a build-up, and then a part of me thought the pads were scraping, which they probably are. The sound isn't a continuous one, but is more sporadic as though there was a few spots rubbing and also when I use the brakes. I sprayed both rotors on the outer edge with WD-40 and they got a lil bit quieter, but they do make some noise. Will have to get them checked out soon, but at least I don't drive my van much.

[@1AAuto]

Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c +Kevin C

[@nalsra0]

Did you figure out what was wrong?

[@thecarman3693]

I had a similar issue and for the life of me I couldn't find the culprit. But then it dawned on me, I recently replaced the front drive shafts (half-shafts) which required removal and replacement of the front rotors. It was done at a local shop and I began to think what if they didn't fully clean and sand away rust build up that happens between the rotor and hub? Replacing the rotors with rust build-up (even a little) can cause the rotor to wobble enough to score just enough against the pads as it rotates. Sure enough I took the rotors off, sanded everything down smooth and replaced the rotors (which now rested flat against the hub) and no more noise. So if your rotors were taken off and replaced, check to see if this necessary step was done.

[@merc340sr]

I had this noise so bad on my car, it sounded like someone was banging on a sauce pan with a spoon!

[@jons1752]

Thanks very much---this was very helpful, saved me a trip to the brake shop as well as whatever they would have charged me. When I do need new parts I'll check with you first since you took the time to make the video and earn the business. Thanks again

[@qreekachannel8307]

Ima about to cut my dust shield off

[@MrMetalclay]

I'm trying this, it happens intermittently and it looks closer than the other dust sheild. I was also racing against the rain when I finished the brake job and the wheel slipped sprained my thumb and rolled around under the rotor. I also added extra lube and did a light sand on what appeared to be glazing, an i think that's what was causing squeaking on the other side. Hopefully all the noise is cleared up

[@rel62]

Thank you for this instructive and useful video, folks. It's what I needed for my 2008 Honda Pilot scraping noise!

[@BrodyMike]

This is the exact noise my town and country has been making. It only happened after changing my brake pads, calipers, and rotors. I assumed it was because I changed my brake pads and left them on my old rotors. The noise started after driving about 100 miles after servicing, I then changed the rotors and it continued making that noise.

[@mark8462-n2x]

Was having the same issue on my Forester; a slight metallic tick tick sound from a front wheel that changed pitch based on how fast the wheel was rotating. With the rims I have I didn't even need to take wheel off, just stuck my finger between spokes and pushed the top of the shield back a tiny bit. Took all of 10 seconds.

[@techboys100]

Me too

[@SYScottiey]

Fantastic video.... I’ve got the same problem on 2011 Hyundai i10 (UK) a lack of use issue and a lack of service / cleaning of these parts. Big thumbs up.

[@johndef5075]

My dust shield wasnt rubbing but I cleaned as much rust as I could from inner and outer rotor edges and noise went down considerably.

[@Lazarus_81]

Thanks so much!!! I have an issue with my 2018 Honda Accord LX. First thing in the morning I went to push back my dust shield behind the rotor, I heard something drop 🤔 started my car drove it for while below 5/10 mph and the sound is gone, it's was rock 🙏🏽

[@mikeeubank246]

This noise just started on my truck. I was afraid it was a hub or bearing going bad. Huge relief.

[@hermandahlgrense]

Exactly the same for me, was worried a bearing or some driveshaft was done

[@fbj59]

I wish I had seen this video, i just changed my wheel hub on my truck today $180.00 :( I still get the same rubbing sound, I will check the cover now.

[@lukelu9016]

Yup, just fixed my problem on both wheels. THANK YOU!

[@1AAuto]

+Luke Lu Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@knolez1546]

My noise just started this morning. Thanks. I'll check this

[@Youtubehandle579]

Nice! This was the issue with my car. Just had to push at the dust shield with my hands while parked & it went away :)

[@Mr.Bunny_.]

Thank you. Just fixed this issue myself in my Ford Kuga.

[@HoofHearted6]

Great video! I recently had this issue (for two years). 😒 yep, my mechanic knew immediately the cause and bent it back no charge.

[@ksmmoore7607]

First video I have ever watched that was very helpful. Great videography!! 👍

[@michellerhoades6766]

Amazing 👏. Thank you from a single mother!!

[@1AAuto]

+Michelle Rhoades Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@blainemeyer]

Another helpful tip is you could actually take a pneumatic wire wheel if you have one and remove loose or built up rust

[@MariaGonzalez-ei1pv]

Great video .I have a 02 toyota camry le 2..4 4cylinder scraping noise on my front passeger tire...what makes the shield get close to the rotor?I'm a Diy 😊

[@georgek3834]

Can slight contact between the shield and the rotors make the rotors warp?

[@stevengordon4154]

So he mentioned it makes the noise while turning left. I have a similar noise with slight rights like changing lanes. 2 seperate mechanic shops could not replicate the noise and told me my pads are good... Also, apparently my vehicle is structurally sound (their words) and I have nothing to worry about mechanically. Its more annoying then anything to be honest but I also want to ensure the safety of me and my family. Any suggestions?

[@BLACKOMAMBO]

You should try to slightly bend the shield of the rotor,mine does it while going straigh

[@RedMango55]

Can the dust cover be adjusted without taking the wheel off? I get this rhythmic scraping sound when I do a sharp left turn, it is not constant only at a certain point of the wheel turning. Kind of like ch...ch... ch...ch

[@jmansour84]

I have the same rhythmic ch...ch...ch..ch, like you described. I don't know what car you have, but I was able to bend away the shield without taking the wheels off on my car. Turn the wheels all the way one way to try and reach in behind for one wheel. Then do the other by turning the wheels in the opposite direction.

[@thomaswalton9089]

Just did my struts, lower control arms and sway bar links but now its grinding no more clanking tho, ill check the dust sheild in the morning thanks

[@hectorboyar4321]

I had a shaddy tire shop bend the shield after getting a flat fixed and I remember the guy telling me I needed to change my brakes soon. Some people I tell you.

[@pmarquisYT]

Thanks for posting this, it was very helpful to me. I bent the guard against the disc while replacing the brake pads and it was making this loud grinding noise afterwards.

[@1AAuto]

+pmarquis1 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@wonderfulworld5134]

I pulled a fallen tree that was too much load. Front brakes on the side of the hook made a grinding noise. I replaced the brake calipers, and still a problem. I replaced the brake hoses and still a problem and a louder grinding sound. Finally I replaced the wheel bearing assembly and this was the cure. I must have broken the wheel bearing, bearing retaner. Also the ABS light went completely off from going on and off.

[@aegisbrax5325]

Thanks for the informative, no bull videos. I will definitely look into purchasing parts from your company.

[@seriouscatisserious]

I get this sound too, except it only happens when descending down a good sized hill. I have one on the way home that I hit every day and as I get about halfway down the road, I hear this scraping sound. It's coming from the passenger's side rotor area it sounds like. The only thing is, this is a fairly new car and isn't even 3 years old. What could be going on here?

[@KrazyRedNinja]

My car has this did you even find out what it was

[@darrenjackson5]

Thanks so much! fixed my 2008 Jeep Patriot in minutes!

[@1AAuto]

+Darren Jackson Thanks for checking us out! 1AAuto.com

[@wyattwilson2355]

What a legend saved me so much time and money

[@swissteam777]

Just did my brakes on my 2011 Camry and while I was attempting to remove the rear left old rotor which was nicely seized, I bended slightly the dust shield. First I thought that it was my parking brake shoes that were too tight, but then I loosen them up and the noise was still there... All of that to figure out that it was just the dust shield... 😆

[@johndombrowski3225]

You saved my butt!!!!! Thanks A1Auto!

[@1AAuto]

+John Dombrowski Thanks for checking us out! 1AAuto.com

[@blueridgepics]

Whoa, you may have just diagnosed my problem. Thank you, I'll let you know in a day or so.

[@1AAuto]

+blueridgepics Thanks for checking us out. 1aauto.com

[@Pinkielover]

rocks get stucck sometimesj

[@1972mercurycougar]

Mercury Grand Marques, Lincoln town car, Ford Crown Vic, '03-11' very common in rust belt!! Panther platform Ford RWD, cars!!! Love them!! Easy to fix. Maintenance Ez also.

[@codcade]

I have a sqeaking/screeching noise that sounds like metal scraping, ive replace wheel hub bearing and brake pads, any idea what it could be?

[@fishlifeknives7429]

Something im going to check in morning. No other video mentioned dust shield.✊👍 My pads are good and rotor brand new. If the dust shield doesn't fix the problem.... Could it be the caliper & or mounting bracket??🙏

[@1AAuto]

+Fish Life & Knives We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@fishlifeknives7429]

@@1AAuto was literally the dust shield. 👍

[@TheRobiez]

Just to add on to this topic that the wheel hub bearings do too go bad and may cause deflection and you will hear the shield rubbing as that part ( dust shield ) is stationary and in many cases there will be close clearance and rust build up on rotors that will cause it to rub.

[@1AAuto]

+TheRobiez Thanks for the feedback!

[@FreshKicks4545]

A diagnosis is a helper. My Camry had two unbolted lug nuts. When I would turn the rim would scrape on the nuts.

[@edwardmarshall6483]

Thank you!!! 🙏🏽 Very helpful video! Saved me time and money from going to the mechanic.

[@yearsapart9240]

Thank you so much. Very informative. Straight to the point. It helped me a lot.

[@Lsbud]

Thanks 1AAuto. I have a scraping noise much like this, but mostly when backing up and when I push the brake pedal down after backing up. I just had the brake pads replaced about 1 week ago. Does it sound like the same thing? Thanks

[@1AAuto]

+Leroy S Thanks for checking us out!

[@BugzKiller]

Yeah took my car in, they told me my CV axle was bad! I'm thinking....NOT!! Took it to another garage was this problem, dust shield!! They fixed it, took it for a ride turning all ways possible, and NO charge!!

[@TheJackMarcin]

Literally sounds like my exact issue. Comes from the front right side when i thrn left 🤣🤣 i just now need a jack and a jack stand…

[@FishOn504]

Own 1996 Crown Lx. All 4 wheels are dragging very lightly enought to generate heat and notice drag. What direction should i start looking

[@SimpleFishing]

I just changed my brake pads and rotors and had to hammer one of the rotors off, the rock guard was bent during the process. Now I have this same noise while driving straight and quiets on turns. I won’t have a chance to straighten the guard for a while. Any issues driving for a while with this?

[@Sniper222333]

If i have similar rust on the edge of my rotor that is contacting the splash/dust guard and causing audible noise when driving, does it cause any damage to the rotor or brakes ?

[@williammartin4206]

I have a question. I hear bad scraping from my rear 2WD Highlander. I just replaced the hub bearing and dust shield. Could a bad strut make the rotor hit the dust shield? At higher speeds I do NOT hear this as much. there is a little play in the strut shaft if I yank on it. I want to buy all new struts if this is the problem. It seems to be only coming from the passenger side

[@BugzKiller]

What about just making sharp right turns that's when I hear it. That's the only time I hear it. My wheel bearings are good as well as my axles. They were changed about a year ago.

[@1AAuto]

+@BugzKiller We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@nedoscarsandfishingvideos5500]

Best channel on KZbin

[@1AAuto]

+Nedo the car Guy Thank you very much! We appreciate your feedback!

[@Msleelee9487]

on changing bearings and rotors or even brakes is it best to just change both sides?

[@1AAuto]

+MsLeelee94 Thanks for watching! Yes you will want to replace all of those parts in pairs. You can be sure that the other side is not too far behind if one side has already failed! 1aauto.com

[@clemlimerick6780]

I had brake pads, rotors, and struts replaced. Before I got home from the mechanic shop, my car was making that loud scraping and squeezing sound. It scared me so much I had AAA tow my car back to the shop. Waiting today for their okay to pick up my car again. I paid them $2236.00 for their work.

[@hdrjunkie]

Any you also take a wire wheel to the outer edge of the disc to get rid of some of the rust?

[@pedrohdz1964]

I hope you showing more stuff for trucks, I drive a chevy Silverado New style body style and I learned a lotta stuff of how I do my own repairs 👍

[@tim8993]

I only hear a slight pretty quiet grind from the rear driver side of my 2016 428i when accelerating after backing the car out of the driveway. 39k miles on the car and its a cpo. Any suggestions, should i check the heat shield?

[@dee1380]

Thanks.. I just replaced my brakes, & I hear this noise loud.. I will give this a shot..

[@1AAuto]

+Dee 1 Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@Baboon813]

Thank you so much i was s******g bricks thinking i had to have massive work done lol

[@noahrussell3286]

I need help I have a 2014 chevey impala limited ls I changed my cv axles and my struts and my car makes a scraping grinding noise that is coming from only the drivers side tire area I just don’t know anymore I can’t think of anything g else that would make that noise other than a bad roter r a bad bushing. Please send me some ideas of what to look at to check😂

[@carolyndawson2560]

Just replaced brakes ,and rotors back now hear grinding on 03 buick was told could be calipers

[@TOTTLIVE]

My car is doing it but from the back.. and has drums rather than disk brakes. But makes exactly same noise. I inspected the front and back brakes and everything seems to be fine but now that I saw this helpful video hopefully I can locate the issue.. Anybody with rear drum brakes issues like this? Please advice. Thank you

[@simonloewen1204]

My guy just solved my problem🤣

[@boots7859]

Thanks for a behind the rotor look!

[@1AAuto]

+Boots Thanks for checking us out! 1AAuto.com

[@Xcepticus]

Thank you for sharing this helpful video. 🤝

[@lunatic8654]

i just had new rear rotors and pads done and my dust shield is loose and rattles bad ....its not doing any damage at all but its noisy as shit, I can hear it over my motordyne exhaust .....how do I tighten it up? or should I just cut the loose part off ?

[@emm3334]

Thank you very helpful video

[@idontknow2217]

Thanks alot for the video..I'm pretty sure this is what's going on on my 2002 dodge ram 1500 its making the same noise and it comes and goes im gonna check it out first thing tommorow morning