How to Disable the Alarm on a CFMOTO CFORCE 800 | Can't Take It Anymore!

I can not handle the beeping noise any longer and i know you cant either! The beeper alarm on my 2021 CFMOTO CFORCE 800 is finally gone. In this video we will address the issue and we will show you how to disable the alarm on your cforce 800 or cforce 1000. This deals with the rpm rev limit and the oil pressure and the overheating temperature alarm. Do This At Your Own Risk!
T-Shirts and hoodies! Also something for the Ladies... So click here to check out the store my-store-11474901.creator-spr...
You can purchase your CFMOTO at Main Street Cycle; Americas #1 CFMOTO Dealer! Just call 662-438-6407 Monday - Friday 9am to 5 pm. You can visit the Website at www.mainstreetcycle.com
If you enjoy our videos and want to help support this channel please click this link:
/ realtalkpowersports
Check out the page and I encourage you to watch the short video that you will find on this page and check out some of our goals and benefits of becoming a Patron for the channel! Yall are Awesome!
If you want to see what CFMoto has to offer subscribe to our channel.
Also go check out Main Street Cycle @
www.mainstreetcycle.com/
Also Visit their Facebook Page @
/ mainstreet.cycle
God Bless!!!
#CFMOTO #CFMOTOUSA #MainStreetCycle

[@alanj7306]

I wouldn’t be able to stand that beeping sound. It’s just way too sensitive as well. At least with these CFMOTOS, there’s a simple solution for simple problems. After watching a lot of your videos and seeing how easy they are to work on, you sold me. Within 2 months, I’ll be getting a CFORCE 600 Touring. Should be the perfect quad for me. Stay safe and healthy and God bless!

[@jefffranklin6790]

Just as always y’all come through with another ez how to video. Been waiting on this video for a while. Will b unplugging mine this weekend. Thanx a lot

[@RealTalkPowersports]

No problem Jeff! Thanks for watching

[@AnubisReviews]

Planning on getting one of these or the 1000 in the future and saw another video where it beeped when they revved it to show sound. Personally I'd pull the beeper and install a small led so that it will blink instead of beep. Then I can get a noticeable warning that reminds me to check the guages just in case.

[@cliftonfreeman5481]

Thanks for doing the videos,the evap canister one really helped me out. Thanks!!!

[@RealTalkPowersports]

Great to hear! Glad we could help man

[@CruizinWithTheCarsons]

I KNEW KNEW KNEW I could count on you to show us how to disconnect this ridiculous beeping constantly. Just got my 2021 800XC back from its break in maintenance. Before I took it in it would be on deceleration only. But now........................ oh oh oh now, it constantly beeps when I accelerate between 28-33 mph and I don't even get on it hard. My dealership said get used to it because these things will beep at you all the time, yes they told me that. I am totally disconnecting that damn thing tomorrow. thank you so so so so so much for this video.

[@RealTalkPowersports]

No problem Greg.. Just pay attention to your gauge cluster and you should be just fine.

[@bobbygoodfellow7507]

Just picked up a 2022 overland thanks in part to your videos. The dealer disabled this beep for me already so no problem when hitting it. Watch your dash lights 👍

[@matthewkenna1053]

Do you know if this was fixed in the new 2023 800xc? I’m picking mine up this week.

[@eddale5557]

Yes as we alleredy know from cars and mc no beeping there only on the Cforce LOLZ!

[@eddale5557]

@@matthewkenna1053 I have a 2023 1000 and it beeps all the time!

[@mattgadomski8894]

LOVE you guys for this!!! Just did mine a few minutes ago and just to add, I didn’t have to take the center console piece off, just look under the right side after removing the air box cover piece and the plug is right there! Easily accessible, thx again guys!!

[@RealTalkPowersports]

Awesome matt!! 💪

[@4whlsatv4life]

How do you remove the plastic pins to get the plastics off? I'm trying 2 flat-head screwdrivers but there has to be an easier way.

[@RealTalkPowersports]

@@4whlsatv4life get you a small body panel clip tool off Amazon.

[@ohiokyle8487]

Thank you for the video!

[@ryankennedy9414]

Considering the beeper plug comes from the dash cluster one of the main harness wires up to the cluster must be relaying RPM info, if a service manual exists I would just pop that wire out of the plug, then the other functions would still work. You wouldn't see RPM's on the dash but I would prefer that to having no audible oil or temp alarm.

[@alvykerans825]

Do you have a video where you're gonna show where to hook up wiring system for lights that comes on with an initial switch

[@aaronnewcomer4235]

I dont have an 800xc, but I wonder if there would be a way to wire a relay into the RPM sensor that could break the connection at the beeper when it sends the signal to beep but still leave it active all other times rather than completely disconnected... It wouldn't be as simple, but would at least still give an audible warning for everything other than the throttle...

[@matthewkenna1053]

Has this issue been fixed by the factory? I’m picking up the new 2023 800 this week. Thanks for the videos.

[@ashleighjeffreys625]

Hello I'm form South Wales and love your channel, have a 625 touring. Can I do the same thing to that?

[@Pajero.m57]

Do you know to disable the daytime lights? they're always on on mine even with the switch light on off positio! thank you very much

[@RobertGrant1971]

Thats great to know. you should do one on the 950 after harness are installed to get ride if that seat belt light.

[@RealTalkPowersports]

We can I sert that into a video..

[@RealTalkPowersports]

Insert*

[@longwaysb6369]

Awesome video!!!!

[@soscattered6126]

Thanks for this!

[@RealTalkPowersports]

No problem

[@charlesmason4535]

Thanks next on my list.😀

[@RealTalkPowersports]

💪

[@tashspop]

perhaps use the wires to hook up a small led indicator light to still have some warning as a reminder to check gauge cluster.

[@buckyspowersports299]

o i'm taking it out thank you for the video

[@RealTalkPowersports]

Awesome! glad it was helpful

[@GrasshopperGardenServicescouk]

I have a z1000 sport in the UK with the same buzzer. Do you know where this is fitted. Thanks

[@user-lw4pw2ww6d]

thank you so much

[@davidterry6849]

Great video

[@RealTalkPowersports]

Thanks David

[@sunburst_xmr]

hey guys. love your videos. Do you know if I can use that plug for an accessory? such as hand warmers?

[@RealTalkPowersports]

Thanks so much !! It is very much possible.. just have to look at the amp draw and stuff

[@muneebasghar6515]

Hi guys do you know where this is located on the Zforce 950 ? Thanks

[@chadspinosi8331]

Good video once again! I'm looking at buying a CF Moto....dunno what model maybe the new 22 500 or an 800 2up machine. I noticed you took the passenger backrest off as I would too. Are there ANY options for like a flat seat with no backrest available at all?

[@DCSPORTSTER]

There’s a cargo rack available as an option where the backseat goes

[@cliffyb4197]

here in canada i had a reflash on my cforce 1000 and it doesnt do that no more and everything else works as it should

[@scottbeefful]

I'm pretty sure CFMOTO has a reflash available for the computer that gives a little more time before beeping and helps fix the beep unless there really us something wrong

[@PragmaticTornado]

Hmm, my brand new Cforce 1000 (about 8 hrs ridden) beeped now and then the first few trips, but hasn't for quite a long time now, and I've been getting progressively harder on the throttle. At any rate, this is a ridiculous design, on a recreational vehicle where the limits WILL be pushed all the time. I truly wonder what they were thinking when they came up with the idea. Other than that, great vehicle so far.

[@guysmiley8473]

Thanks for that. Really don't like all that beeping nonsense. Question for you. Would the cforce 800ex shocks fit on the uforce 800? I would love if my uforce rode like my cforce. Any recommendations?

[@RealTalkPowersports]

No I wouldn't do that.. the uforce shocks are rated for hauling and more weight capacity

[@komunakomunalska1664]

great vids bro, i am considering an cforce 850 betwen bruteforce 750 what common problems have the cforces..lets say hows their reability with belts and stuff.. i will be doing just long trail ridings for weekends..

[@RealTalkPowersports]

The cvtech clutches are great!! The cfmoto oem belts hold up a long time. Very pleased with them

[@Yamaharider98]

Hey Blake, hope all is well. I rolled my zforce 950 and boogered my passenger door up pretty good. Anyway you could price me a replacement? I can’t seem to find one no matter where I look

[@RealTalkPowersports]

Hey! I know Joel can if you contact him through Facebook or on the MSC CFMOTO Facebook page

[@petemcdaniel2746]

What wheel size is this setup ?

[@crazyflyboy30]

I wish my Sportsman XP 1000 had a problem it would have a beeper. Just lucky I have a Oil Pressure Gauge on my Sportsman XP 1000 because I put it on just because I was riding on a Insane steep hills and I can down hills so steep that I had (( 0 )) oil pressure . And see if CFMOTO will build a Electric ATV.

[@travissmith1599]

Is there enough power at the connector to wire in a small led light. So the light would come on instead of it beeping.

[@RealTalkPowersports]

Travis that is a GREAT idea!

[@RealTalkPowersports]

A little red led light indicator would be perfect

[@kierzo8543]

Any joy with this ? If not I will try and make somthing

[@MyShot]

Has to be a better way can't the rev limit raised?

[@doomslayer4209]

My 850xc 2020/2021 temperature went up to full bars and started beeping when it hit H, why's it overheating? I rode it for like 20 minutes on a cold night????

[@charlesmason4535]

I don't have face book, tryed a few times calling main street cycle, it's a busy place. I blew my front differential and couldn't get the axles out. Was wondering if the four wheel needs to be engaged to get it out? Have a 2019 800 cforce.

[@RealTalkPowersports]

Axels should pop out no matter if 4wd is engaged or not. But they are hard to pop out sometimes.

[@RealTalkPowersports]

We will do a video one day soon on that.

[@charlesmason4535]

Thanks when I get a front diff I'll try it again.

[@MrTimberwolf25]

I’ve covered my air intakes an air outlets with bags when ready to wash the bike so i don’t get water in them even if I did wash it only once now lol

[@eddale5557]

Is it not a fuse for this beeper who you can remove then? Only thing who annoys me with the beeper is the handbreake if not turned on it beeps so friking annoying! Also in the LCD screen it would be nice with a RPM metere so red is no no. And a funny thing simelar to this beeping i have a VW car and if i put grocery bags with food and such in the right seat it beeps there too because of the seatbelt lol it think it is a passenger there lol without the seat belt on! hahah!

[@piquat1]

How to shut off the daytime running lights on a Cforce 800 xc?

[@jaywakenight]

I have a 2021 cforce 800. Took it out on its first run. Within a couple hours it over heats. Brand new and over heats. Do you have any ideas why a brand new atv overheats

[@mscbros7938]

Check fan fuze

[@jaywakenight]

The fan kicks on

[@shanelakings1890]

What clutch kit do you have?

[@RealTalkPowersports]

The kit that MSC sells

[@angryman71]

Hey -- sent you guys a message on REAL TALK POWER SPORTS facebook IM.... about blinkers... can you respond to that, please? Possibly do a video on it? And, thank you guys for showing us how to do the annoying beeping removal.

[@RealTalkPowersports]

I just responded

[@RealTalkPowersports]

And thank you! Im glad it was helpful

[@big_red_606]

They really should do away with the rpm warning. Now that I did my break in period I am able to go full throttle and the beeping can be annoying lol. Will doing this void the warranty?

[@RealTalkPowersports]

I know it won't void the warranty at MSC.. because it still notifies the operator on the gauge cluster

[@cadenbish1755]

How long does it usually take to break in the cf motos ?

[@RealTalkPowersports]

The owners manual spells out specifically what the manufacturer recommends for the break in procedure which is a total of 20 hour engine run time before they say it is "broke in"

[@cadenbish1755]

@@RealTalkPowersports thank you I wasn’t sure since I’m getting one and wanted to know how long until I can bring it in some mud lol

[@paulmartinez3879]

Great video thanks for the help. Do you have a video on how to turn daytime running lights off when you put switch in off position. Hate the fact lights on all the time. 21 cfrorce 800

[@CalvinAllred]

I would love to know that as well. There are times I want to go in dark. I haven't ripped into it myself yet.

[@travisbarr5367]

Will it still beep after your break in period is over?

[@DCSPORTSTER]

I have a 2021 C force 800 it’s got about 22 hours on it no beeping at all. It did at first because the RPM was dropping down to 1200 RPM. Oil pressure switch must be very sensitive. Now it runs at 1300 to 1400 RPM all the time it’s all good. Oil pressure on that engine runs anywhere from 20 psi to 100 psi there’s no chance it doesn’t have oil pressure unless there’s no oil in it. Holds 2.5 Liters of oil with oil filter replaced. Now that I think about it at 16 hours there was one big loud beep and has never done it since. Only time it beeps now is when you first start engine or after you change the oil until engine has oil pressure

[@KITT-K2000]

i dont know if they fixed the bip in 2023, i am looking to buy one

[@chrisreynolds6959]

What about some 19 zforce 1000 content pipes programmer and things like that

[@RealTalkPowersports]

We don't have any that I can get my hands on

[@Skapligt]

This should be fixed on warranty by updating the gauge. A fix is coming soon so you dont have to disable the buzzer completely. They are aware of the problem that the alarm is too sensitive.

[@JohnCrashJones]

So was this fixed with an update?

[@navarroleal]

Wouldn't it be better just to disable the signal coming from rpm gauge alarm so that at least you retain the high temp and low oil pressure alarm?

[@RealTalkPowersports]

Thats not that simple.. will have to do some digging in order to find out more to do what you are saying. What you are saying would be best. But not as easy for just anyone to do

[@unclebuck5957]

Where is the cv air exit on the machine all others seem to low get in water wet belt if you slow down

[@RealTalkPowersports]

It is tucked under the seat

[@wmnapier]

Could you cut the beeper off and ad a external Light???? At least you wont have to listen to the annoying beep.

[@GulbeneAdventures]

What's the rim and tire size &make ?

[@RealTalkPowersports]

14 inch Msa diesel wheels and 29x9.5x14 system 3 xm310s

[@GulbeneAdventures]

@@RealTalkPowersports Thank you brother, keep up the good work 💪

[@jeremeywright]

My 2021 cforce 600 touring has never beeped i’m guessing it’s just the 800 that beeps??

[@RealTalkPowersports]

Yes the 600 doesn't beep

[@coldragoon]

Hey, ik just curious if you guys noticed, but my odometer for every 100kms I'm actually going 80kms. I just got a gps recently and the short ride we go on is only 80kms but my odometer says 100 each time. Anybody else have this issue? No tire spin because this trail is nice all the way

[@coldragoon]

I'm just worried I'm gonna hit my warrenty limit alot faster than expected because of it

[@hphillips7425]

It was not very smart to have the over rev as part of the the audible alarm. Oil and temperature audible alarm is fine.

[@johnnylove4185]

hey my name is Johnny love in Louisville ms I got a 2022 side by side cf force 800 got 90 mile when do I change the oil

[@RealTalkPowersports]

We typically do the first oil change around 100 miles or 20 hours

[@ticenits2967]

Also, if you are low on oil or have low oil pressure, you will run the risk of cooking your engine. Not a smart mod in my opinion.

[@RealTalkPowersports]

It does not disable the Oil Pressure Light... only the beeping alarm.. so if you pay attention to your gauge cluster from time to time, then you will be alright.

[@LZpartsatv]

it seems to me that this is not the solution to the problem .. it is enough to make a bridge under the seat and there will be no sound ... do not remove this beepmaybe you didn't understand people..I have this model and apart from the sound from the seat it's ok

[@buckyspowersports299]

I have a 2019 800 2028 hundred two 2021 800 anozie force 2021 I love them all but on 800 I've been thinking about getting rid of it I'm driving it beeps I slow down it beeps I go up hills it beeps 27 miles an hour it beeps all it is absolutely sickening I took it back to the dealer and they said there's nothing they can do about it they checked all the pumps they checked the fuses a check everything the regulators whatever they did and that thing just beeps all day long it 800 2021 twenty one absolutely sucks

[@WintJames]

how do you disable that awful horn. if i cant find a way im just gonna rip the button off. worst thing ever lol.

[@jacklane3087]

You wanna deresrrict your machines then there can an killers

[@russ5234101]

I heard it stops after 20 hrs (break in period)

[@RealTalkPowersports]

It doesn't... at least mine didn't stop after 20

[@christianandrews5986]

I am pretty sure my 2021 600 does not do this

[@RealTalkPowersports]

Thats right.. only the cforce 800 and 1000.. particularly the 2021 models

[@robz4522]

What does your 600 idle at? mine is 1800rpm seems high?

[@georgejacobsz81]

Took me one minute. 🫣🙂