How to disassemble electric drill and find the error issue. There is error in drill and will I investigate the issue.
Пікірлер: 115
@irmaztamal215 жыл бұрын
Thank you. I just open my Royce SB 1000 Hammer Drill guided by your video. Finally my hammer drill is back to life.
@goom10018 жыл бұрын
No need to by a new one my friend, a very simple fix is to 1- Take out the 2 contacts and clean the heads from carbon. 2- Extract the small spring in the middle, and stretch it a little and notice that it should push on the ends of the 2 contacts when pressing the switch. 3- return everything to place and test to see the top contact close first then the bottom one close after, not together. Actually, my drill is the same type as yours and the switch was damaged more than yours, found bent pieces. I have just fixed it and it is back to service. Working as a charm. Thank you for the Diagram tho lol.
@PeterFinnTheCarDoctor8 жыл бұрын
Thanks Your comment. :-)
@ManuLeisure7 жыл бұрын
yes it works thanks! but i can not regulate the speed it works only on the fast speed. any help ?
@jac93664 жыл бұрын
Thanks for putting this up Peter - I'd already fixed my drill when I looked, but still it was interesting to see as you took yours apart more than I took mine apart. Yeah it's true that what you call coils are called brushes, and also that the carbon deposit on the copper is fine - the brushes are graphite and they wear making the contact - often people need to replace their brushes, so now I'll have a better idea of how to having seen this video. Strangely my drill wouldn't turn off without pulling socket, so I believed my switch was broken. In attempting to replace it I ended up opening it up and all the parts looked like they worked fine and it definitely turned on and off - the only thing I could think was that there seemed to be a trace of some kind of lubricant and I thought this might have been conducting and shorting the switch, so I wiped that out, put it back together and it worked. I'm not convinced it was the lubricant / contaminant wiping that made the difference, I think maybe a spring had got jammed somehow and the switch wasn't pushing out properly and that just moving it around a lot in disassembly fixed the issue. Anyway, thanks again I found it useful :o)
@docgaurino5895 жыл бұрын
You must have a multi tester to test faulty contacts ,the motor seems ok...repairing power tools is not guessing where the problem is..you must test from the plug,cords ,switch,wires ,carbon brush and windings of motor..use a multi tester
@pandorawolf82395 жыл бұрын
4 years later i have the same issue with the same drill. Easily fixed thanks to this video.
@PeterFinnTheCarDoctor5 жыл бұрын
Great ! :-)
@chrismullin94372 жыл бұрын
I like that he showed a straight-through video without edits. He hit the problem of the halves not coming apart, so then he showed how he got around the problem. Now if it would only apply to my Craftsman 6 amp hammer drill...
@PeterFinnTheCarDoctor2 жыл бұрын
Good, Sir 😀👌
@mr-Al3eqabi4 жыл бұрын
Thank you for this video. I have like this drill. You help me to fix my hand drill. The problem was in the little box.
@sophieb.59323 жыл бұрын
Hello Peter. For a new children's museum for technology in the Netherlands I would like to ask your permission to use a short fragment of this video (together with your video on disassembling the Orbit Sander...). Is there anyway I can reach you to give you some more details? Thank you! Sophie
@bikes-travels-DIY-farmlife3 жыл бұрын
Your video helped me a lot. Thank you.
@PeterFinnTheCarDoctor3 жыл бұрын
Glad to hear that!
@Electrico-X64 Жыл бұрын
Entré al video sin saber inglés, al menos esperaba ver como reparaba el taladro. En cambio veo un video donde no entiendo nada y dejan el taladro sin reparar 😑
@PeterFinnTheCarDoctor Жыл бұрын
Bueno y gracias por la información.
@stomatolog40517 жыл бұрын
Dude that black powder you are cleaning are fine carbon particles, they are very conductive... just sayin :D
@jeffsylvester73944 жыл бұрын
Hi.do you have a schematic diagram of the wiring from the switch to motor. Thanks.
@dadtechmech2 жыл бұрын
Nice tutorial thanks for sharing looking forward for more videos new subscriber done
@PeterFinnTheCarDoctor2 жыл бұрын
Thanks for the sub!
@brandifarmer6474 Жыл бұрын
Where does the two pins go.when i pulled that plate over the ball bearings they fell out.Please let me know thanks
@PeterFinnTheCarDoctor Жыл бұрын
Noted
@rufuscrackle8 жыл бұрын
just get a piece of metal and file it to same size as broken one. Solder on a contact.
@PeterFinnTheCarDoctor8 жыл бұрын
+Stonewall Popincrop Thanks for comment. :-)
@kpkpkpkpkpkpkpkpkp4 жыл бұрын
Hello Sir i put the drill in to reverse mode while trigger still pressed . did two or more times ..will this action damage the drill ? the drill still works ,what damage would occur because of this action . Its a 240 Volt AC Corded Drill
@CorrieWasserman Жыл бұрын
where can i buy a switch for above drill machine. i live in South Africa. Thank you
@PeterFinnTheCarDoctor Жыл бұрын
Thanks for comment. 👍😀
@sameshytdiffday96854 жыл бұрын
He sounds like Oscar from hey Arnold😅...good job tho buddy same prob with my drill👍
@PeterFinnTheCarDoctor4 жыл бұрын
Thanks 👍
@SueDohman3 жыл бұрын
Is that the new gen Skil drill? I like it! Looks sharp!
@PeterFinnTheCarDoctor3 жыл бұрын
Should be
@unstoppableExodia4 жыл бұрын
Is the motor of a corded drill a little less noisy if it's decoupled from the gears and chuck?
@stephenarling16674 жыл бұрын
Is less noisy but less use if decoupled.
@josepeixoto37152 жыл бұрын
you left out the most important, the electronics the TRIAC that make it a VSR,how could yu do that.
@PeterFinnTheCarDoctor9 ай бұрын
Noted 👍
@israil61865 жыл бұрын
Maintenance of the drills with electric motors from the head of the drills
@morhywaden7 жыл бұрын
The screws should have been removed and stored safely before separating the two halves of the plastic body. Saves looking for them when reassembling.
@PeterFinnTheCarDoctor7 жыл бұрын
Thanks for info.
@ChopperCharles7 жыл бұрын
You call them "coil" but they're actually called "brushes"
@PeterFinnTheCarDoctor7 жыл бұрын
Thanks! Good info. :-)
@PigFucker-hs8ct4 жыл бұрын
what is the exact model of the drill?
@txenofon9 жыл бұрын
hi i have the same problem to this drill.you can buy a new drill because the switch have same money with the new drill.
@PeterFinnTheCarDoctor9 жыл бұрын
txenofon Thanks for info.
@AliAli-kl2dv6 жыл бұрын
Hi, i hope you doing good. my concern is that my drill trigger switch was damaged and i changed to bell door switch. but drill is turning reverse. please suggest how to do switch connection for clockwise.
@PeterFinnTheCarDoctor6 жыл бұрын
Ok, I have to do new video.
@osamahalbasre74076 жыл бұрын
Good
@PeterFinnTheCarDoctor6 жыл бұрын
Thanks. :-)
@Yleski2 жыл бұрын
How did it go with the skill drill, did you fix it?
@PeterFinnTheCarDoctor Жыл бұрын
Thanks for comment 👍
@Milkmans_Son9 жыл бұрын
Are you wearing a space suit?
@PeterFinnTheCarDoctor9 жыл бұрын
Milk Manson Hello. No. I am not the astronaut.
@ronabarca2198 жыл бұрын
I think hes wearing space boots for walking on the moon. ..just joking keep it up guy!!
@mahammadrafikiresur89762 жыл бұрын
What you are calling as "Coil" are not the coils. They are called "carbon brushes".
@PeterFinnTheCarDoctor2 жыл бұрын
Thanks 👍😀
@benzbordz61835 жыл бұрын
The issue of my drill is its rotates like has a bend shafting. It's drill crazy. One time the drill bit got broken. How to fix it? Is the machinist can solve that priblem?
@PeterFinnTheCarDoctor5 жыл бұрын
Bearings
@stephenarling16674 жыл бұрын
Spindle get bended by much force. No fix but replace spindle.
@benzbordz61834 жыл бұрын
It's now. I was go to machine shop we checked the spinddle but ok no problem. We checked up the bearing even the spindle but still okay. The problem why it works crazy is because i used china made drill bits. All of them are bended that's i bought original US made.
@stephenarling16674 жыл бұрын
@@benzbordz6183 Bent drill bits should have been obvious to you. Do not buy Chinese crap.
@benzbordz61834 жыл бұрын
Yeah exactly. Ban Chinese products because all of them are fake and low in quality only coronavirus is the most effective of all china's made products it killed and will kills many live and businesses.
@sindiso_ndlovu2 жыл бұрын
Seems like it could be anything
@PeterFinnTheCarDoctor2 жыл бұрын
Thank You Sir. 😀👍
@void_walker23047 жыл бұрын
Can you upload a video of the hammer action switch repair
@PeterFinnTheCarDoctor7 жыл бұрын
Hi, Thanks for info.
@emmanuelr.debelen51477 жыл бұрын
thanks the information..
@PeterFinnTheCarDoctor7 жыл бұрын
Thanks! :-)
@zyairchannel7 жыл бұрын
Hi sir let me ask.. is it ok f the fun of my drill isnt spin straight?
@PeterFinnTheCarDoctor7 жыл бұрын
No, it must be straight
@zyairchannel7 жыл бұрын
How do iknow sir f my bosch electric drill is fake?
@user-ps6ht5hb4d5 жыл бұрын
@@zyairchannel you can know that from more than one side firest from the in side the materail of the machine is small And look at the data of this machine you can see the amper So measur this machine in the natuer these are some of the things If you went learn how you can fix an other machines you can whach this channel. kzbin.info/door/SKfUUNZcIsu_f7BEesTYZQ
@AbbasAljbory6 жыл бұрын
thank's but what you after that you must continue what you started ok
@PeterFinnTheCarDoctor6 жыл бұрын
Hi and Many Thanks for feedback. :-)
@mohamedhattem42514 жыл бұрын
molto bene
@livetv79527 жыл бұрын
i wind an angle grinder but its carbon spark too much why? and what can i do ?
@PeterFinnTheCarDoctor7 жыл бұрын
Well, your machine is too worn out
@stephenarling16674 жыл бұрын
Make sure brushes, brush holders, and commutator are free of contamination. Make sure brushes are not worn down too far. Grinding grit can wear out many machine parts.
@MrKoirakanava2 жыл бұрын
Katoin tätä videoo tarkalleen 11:03 ennenkö tajusin että äijä on kaajeita. :D
@PeterFinnTheCarDoctor2 жыл бұрын
😀
@bizim_eller3 жыл бұрын
👍👍🙂
@carloshelms34835 жыл бұрын
Too much "coils"....and too much disorder and clumsiness.
@luckshmanherath85317 жыл бұрын
Thanks
@PeterFinnTheCarDoctor7 жыл бұрын
Thanks too. :-)
@user-zq7yz5pf1o5 жыл бұрын
Pls I went second video after this video
@npktrust31844 жыл бұрын
Check power at drill. Check drill switch. Check capacitor. Check brushes. Drill not running nothing to do with bearings.
@PeterFinnTheCarDoctor4 жыл бұрын
Ok 😀👍
@stephenarling16674 жыл бұрын
Npk Trust, Drill not running if bearing seized. Drill smoke and croak.
@npktrust31844 жыл бұрын
I agree completely......but drill not running is not the same as drill smoking and not turning. I am from south africa ..it is a struggle to get spares here. You dont know why impact drll ..sts bitt ones... They run drill bit is turning but when you start drilling it make a noise and dont drill..sound like gears slipping. Have a good day. All of the best ..
@stephenarling16674 жыл бұрын
@@npktrust3184 SDS electro pneumatic hammerdrills like my Bulldog have a fixed torque slip clutch to prevent damaging the gear by overtorque. Sounds like your drill's slip clutch is making that noise. High torque joist drills of recent design have a similar safety clutch, designed to reduce the chance of operator injury. If you've ever been bit by a Hole Hawg, you will recognize the value of that feature.
@npktrust31844 жыл бұрын
Thanks alot....is there a way to adjust it so you get a little bit more torque.???
@aknbozburun62936 жыл бұрын
Drill disassembly with Drill
@PeterFinnTheCarDoctor6 жыл бұрын
Yes
@sthibosthibo1334 жыл бұрын
Lol this guy is funny
@harisaini275 жыл бұрын
सर मेरी पेच कसने वाली मशीन अचानक चलती चलती कम स्पीड हो ग ई है जाम हो ग ई है
@PeterFinnTheCarDoctor5 жыл бұрын
Ok and Thanks ! :-)
@dennisw73505 жыл бұрын
seriuos or is it a comedy?
@PeterFinnTheCarDoctor5 жыл бұрын
Info
@stephenarling16674 жыл бұрын
Dennis Weber, Yes. Both. Masterfully done.
@HungNguyen-hm2kc5 жыл бұрын
Zero
@junjimenez18684 жыл бұрын
You don’t even know the name of parts
@PeterFinnTheCarDoctor4 жыл бұрын
Thanks. 😀👍
@lewymartain8267 Жыл бұрын
Why the put on Broken English. Just be yourself when making a video. People can see through acting strait away. (unless your a professional.)
@PeterFinnTheCarDoctor Жыл бұрын
Noted
@levapancheta87123 жыл бұрын
Unclear tutorial
@PeterFinnTheCarDoctor3 жыл бұрын
Thanks
@same7GFORCE8 жыл бұрын
hi i have the same problem to this drill.you can buy a new drill because the switch have same money with the new drill.
@PeterFinnTheCarDoctor8 жыл бұрын
+samehgpc.gpc gpThanks for feedback. :-)c
@paulmifsud29764 жыл бұрын
@@PeterFinnTheCarDoctor Dear Sir can you kindly help me out regarding a new switch of a SKILL DRILL -Illustration type-E as i need the wiring system from the drill to the new switch...! regards whille awaiting from your end A BIG THANK YOU in advance.... regards PAUL MIFSUD (email : mifsud60@gmail.com / mifsud1@gmail.com)