How to disassemble/ take apart Samsung Ace Plus GT S7500

[@notrox82]

my gts7500 has no network signal, everything else works perfectly, you have idea how can I fix it? thank you very much and good video, really helpful.

[@yoryieduardoabreupacheco5307]

thank you very much dude but i have a question about ace plus' bisel. this bisel is as glued or soldered on lcd like the digitazer, because i'm watching your video i guess that. so, ¿what process would you use to change the bisel without change the lcd?. thank you for to make this video

[@outsourcerepairs]

Hello, Replacing the digitizer on this screen is very similar to other Android based devices. Simply heat the front digitizer along the outside of the digitizer using a heat gun or blow dryer and separate the digitizer from the front housing using a cell phone prying tool or even a credit card. Once you have the old digitizer removed from the phone heat up and remove all the left over adhesive. Then lay new adhesive and install the new digitizer. If you have any questions please message us. Thank you for your time and have a nice day.

[@jpnum]

hello! is it possible to separate the digitizer from the LCD using a air dryer? thanks a lot for the vídeo, it will help a lot!

[@outsourcerepairs]

Yes this is possible simply heat up the digitizer with your blow dryer set to medium to low heat. When heating the digtizer do not heat one location to long move it back and forth to avoid warping the front housing or damaging the LCD. Use a cell phone prying tool or guitar pic and go around the outside of the digitizer to slowly seperating the digitizer from the front housing. If you have anymore questions please message me and I will happy you if possible.

[@slavencica]

Hello, i think i screwed up something with SIM card connection as I tried to dissasemble the phone, because it won't recognize it any more when I turn on the phone. Precisely, those tiny short wires (blue and red) weren't attached to round metal thing any more as i took away the plate. I was stupid thinking that I could handle it without watching some tutorials. Could you tell me please if there's something to do about it? Otherwise all other things functioning properly. Thanks in advance!

[@kidkaliman]

hello, is it possible you can tell me how to change the sim reader on this particular model ? I would appreciate any info ... Thank you in advance!

[@outsourcerepairs]

Hello, You will need to solder the SIM card assembly off or use a heating station to heat the solder and remove the SIM card assembly. If you have anymore questions please let me know. Thank you for your time and have a nice day.

[@dhanushvv6390]

Out Source Repairs can you make a video on how to replace simcard slot of this same model

[@vikryhaykal1199]

I have a problem with network signal plus my samsung galaxy ace. problems that exist in a hole under a gold colored. The holes should be pierced with a needle. then after that the signal coming out of her ... my question. how to right justify his or her unload., can you show it to my video? Thank you.

[@wandersonWBJB]

Hi, it's easy to switch the micro usb? thanks!

[@outsourcerepairs]

Are you experienced with soldering? If you are experienced with soldering then yes it should be easy. If you are not experienced with soldering it may be very difficult but not impossible. I would practice removing USB ports from old cell phones before trying to remove any USB port from a phone you want to use. If you have anymore questions ask we are here to help.

[@pakajiezola]

Hye. my ace plus have a problem. When i mount my sd card to the phone. The lcd have a line at the middle when play the video streaming like KZbin. How to fix it. Thanks masta :)

[@animefanchic16]

Hello, I'm just trying to find out what is wrong with my phone and perhaps it is the charging port. How would you replace this? I'm inexperienced at taking apart a phone but do not have enough cash for a new one, so I'm trying to make this one last. My phone wouldn't charge properly unless I physically held the charger to the phone and went between charging and not charging frequently. Having bought a new battery, I realized this was not a battery issue as I had first thought. Now, it will not charge at all. Please help? from one confused girl

[@outsourcerepairs]

animefanchic16 If you have to hold the USB wall charger at an angle then it is the USB port that needs to be replaced. Replacing the USB port is simple if you have done it before if you have never replaced a USB port or you are not familiar with soldering I would take it to a cell phone repair store. If you need further assistance please message us.

[@marcelompereira]

Ow yeah, I replace my display without problem! Thanks

[@salehinkornain4132]

Hello how to repair ace plus power button..... can u share the video????

[@dhanushvv6390]

Bro can we remove sim card slot?

[@loboinkieto]

how can i change the mic on this?

[@iOSRider4983]

I cannot take out the rear housing though. the right part, near the usb connection.

[@sauliustamosiunas2748]

where phone antena ??