How To Display Hot Wheels On The Wall - CHEAP & EASY!

Thank you for watching! I hope you guys found this video helpful, please subscribe! Help me reach 4,000 subscribers!
LIKE and FOLLOW for more Die Cast Content.
TikTok: www.tiktok.com/@shawnnicklausyoutube?is_from_webapp=1&sender_device=pc
Instagram: shawnnicklausyoutube
KZbin: kzbin.info
Inquries: [e-mail]
Sterling Protector Case - 48 Pack
www.amazon.com/Sterling-Protector-Case-Mainline-Matchbox/dp/B073GCBDZR/ref=sr_1_1?crid=1RS4116GZJPUA&keywords=sterling+protector+case&qid=1680015403&sprefix=STERLING+PROTECTOR%2Caps%2C228&sr=8-1
Sterling Protector Case - 120 Pack
www.amazon.com/Sterling-Protector-Case-Wheels-Matchbox/dp/B073GCQ8BL/ref=sr_1_2?crid=1RS4116GZJPUA&keywords=sterling+protector+case&qid=1680015512&sprefix=STERLING+PROTECTOR%2Caps%2C228&sr=8-2
#matchbox #matchboxcars #matchboxcollection #matchboxworld #exclusive #fyp #hotwheels #hotwheelscollection #hotwheelscollector #mattel #redlineclub #showcase #foryoupage #collection #collector #hotwheelsunleashed #hotwheelsindonesia #target #targetfinds #treasurehunt #trending #trendingshorts #treasurehunting #car #cars #carshow #carhunt #dragstrip #dragrace #dragracing #dragstripdemons #carculture #target

[@crt5300]

They also have paint friendly two sided tape so you don't have to peel paint off your walls. I'm against putting holes in my walls.

[@extremercbashers9975]

Yeah that's what I use to commands and I put one of them about every foot and that white trim videos using is RFP trim so if anyone goes to Lowe's or Home Depot and they're looking for it and you need to explain to an employee what you're looking for just tell them you're looking for RFP trim I just had to put that out there I'm a construction worker

[@leojohnwayne1422]

@@extremercbashers9975 what brand ?

[@extremercbashers9975]

@@leojohnwayne1422 commands made by 3M

[@shifty_s197]

@@extremercbashers9975good looks bro i do tile cheers

[@jamescole8482]

Just be mindful of the paint type and how many layers. I’m renting military housing and the paint is so thick, it peels of with command strips. 😕

[@sailorjerry3720]

You're very good at breaking down a complicated process. Very informative. Keep it up!

[@ShawnNicklaus]

Thank you so much. I appreciate the feedback!

[@Pokemiki303]

Instead of using staples I use 3m strips that are used for command hooks,paint won't come off and that way you are not piercing through the pastic and risc damaging your cards, I also display them horizontally so I can see the artwork of the package itself

[@stephentaege6255]

Thanks Shawn i have about 12 thousand model cars from nearly every country been collecting since I was a 12 year old boy some 40years later my love for diecast models is still strong cheers Stephen 🤠🍀✌️👍

[@HonestDiecast]

Really awesome way to hang carded stuff, I love it!

[@ShawnNicklaus]

Thanks so much!

[@TopperJordan]

Very nice setup mate! Like it!

[@BRONCO360666]

Best vid ive seen on displays ive seen! No more carded cars flyin off the wall and getting damaged for me!

[@gambit_toys6554]

Nice idea! HOME depot for the win! 😊

[@lieezat2585]

Cheap and easy, love this idea! Thanks

[@ShawnNicklaus]

You are so welcome!

[@bobbyjones2112]

well done! That’s a fantastic idea and it looks super clean and easy!

[@ShawnNicklaus]

Thank you!

[@miguelguerrero5541]

Thanks for great ideas 👍

[@NitrousDiecast]

Nice, I will have to try this.

[@ADjasonTplayz]

you are a good engineer.

[@chuckkendzierski7385]

Finished phase one of my wall. Many thanks.

[@AllanDelosReyes]

Thanks for the tips

[@BlackCat-nv5sf]

Good display brother.

[@litogutierrez7050]

Great Video!

[@Splitt100]

great idea, I know where Im headed this weekend :)

[@AshleyGarcia-dr1sw]

THANK YOUUUU SM!!!!, I swear everything now is way too expensive and it requires you to remove the packaging off them so appreciate the video!!

[@trevor_4]

Hi Shawn, thanks for the video, very helpful! I had a video idea for you: Common hot wheels treasure hunting mistakes to avoid. Such as not knowing which cars you’re looking for so you or check every single car for the t hunt logo, not recognizing when cars have already been picked over, etc.

[@ShawnNicklaus]

That’s a great idea! Thank you so much for the suggestion!! 🙌🏻

[@trevor_4]

@@ShawnNicklaus no problem!

[@narenderelapavaloresubrama5553]

Good video mate! Alternatively, blue tack is another option, that could still hold the weight? Thanks for sharing.

[@Soli2deYT]

I've honestly had lil desire to display mine on the wall, but this is a pretty sweet solution. You might have made me reconsider. Thank you KZbin Algorithm! And Shawn. :)

[@ShawnNicklaus]

Your welcome! 😎🙌🏻

[@Hotwheelian]

That's a great idea thanks for sharing 😊👍👍

[@ShawnNicklaus]

You’re welcome 😎

[@DmRealToyCars.3693]

nice display on the wall I have also made a DiY wall shelves and the materials I used are Foam Board and stick glue to my small collection the size is 1:36 , also planning to try hotwheels and minichamps in the future ...thanks for info and idea 😊

[@ShawnNicklaus]

Thank you and that is awesome!

[@mikegreenberg3018]

Good video. Just curious, is the bottom piece just another 8ft end moulding turned upwards?

[@eltiohotwheels7918]

Super buena información 👍👌🇲🇽🇲🇽🇲🇽

[@marianodcabrera]

Amazing tutorial, Thanks a Lot!

[@ShawnNicklaus]

Thank you!

[@theratfink666]

Thank Thank You.I have been racking my brain on this

[@sbd4de3]

Hey Shawn, can you space the moldings far enough apart that you can take the carded cars without protectors out like you can the ones in protectors?

[@inakiunzue2822]

hi! how where u able to get the staple into the little gap in the dividers, its sooo small i cant seem to make any stapler fit. thanks!

[@mattsdiecastgarage]

Hey Shawn… awesome video. A spontaneous question, but what protectors do you use… Sterling? Have you heard of Platinum Protectors? If so what do you think of them

[@user-sf7nh3ni7s]

What do you use for the bottom section of your card display ?

[@bolshoibooze82]

Brilliant. One question what are the dividers used for exactly? I’m from Greece and I can’t seem to find them ! They are probably called something else here. If I knew what they were used for I might be able to find them . Thanks in advance !!!

[@peekyourcdt]

This is good for hot wheels collectors starters plus me bc i need those

[@robertmoore2374]

Are there any protective cases for the monster trucks?

[@ErrorAcquired]

Well said

[@muhammadawisabdshahadan1117]

Nice 👍🎉🥳

[@matthiaseuler5344]

hi, there nice video. where to order these strips?

[@DrewE210]

Very Helpful video!! Thank you I just did have one question. What did you use for the bottom to prevent them from falling?

[@stress-freecalmingandsooth8195]

Curious about what to use at the bottom too

[@Toby47.]

My way is different. I buy wooden poll strips then put hooks on the top and then I buy these metal pins and bend them so that it holds the car by its hook. Looks very clean if you want all the cars to be stripped next to each other at the same heights and the polls are easier to move so you don’t have to take all the cars on and off but simply move the poll to somewhere else with the cars on them.

[@electrickrypt]

What size staple dis you use????

[@niklaus10]

what do you call that white strip?

[@Collectorholic]

Great video. New subscriber.

[@ShawnNicklaus]

Thanks for the sub!

[@yousefalhayder2591]

Hey Shawn, I got a lot of hotwheels and I want to display them but they don't have a box anymore so how can I display those?

[@mando449]

same

[@JonToyCars]

Sterling protectors are the best ... I see people selling those cheap ones (something like the RLC cars have) and ask the high prices. The only ones that deserve those prices are the Sterling ones!

[@NishiNY]

Thanks 🙏 ❤

[@ShawnNicklaus]

You're welcome!

[@dannyrosales5964]

Where can i buy the borders

[@bryanbarnes6689]

ok that is legit~!

[@elrojinegro2119]

Muchas Gracias, best explanation for me....Only one question can I buy car's from you?

[@ShawnNicklaus]

Thank you! But unfortunately I don’t sell cars.

[@htwhls]

👍

[@justinthomas5831]

The cars I don’t have in sleeves. If I display them like this. Will the weight from the cards over lapping damage the bottom of the cards do you know? Idk if that makes sense

[@justininman3221]

I get what you're saying, I'm looking to do this also but I guess with what you said you could just do so many and make another cross run about mid way then continue. I'm curious if the staples will be strong enough to hold the weight after so long... plus I'm not a 100% with putting holes in the wall.

[@robertthabassheadjacobson4968]

Id rather use double sided tape than ruin my wall with staples. Also, a person may not have the type of wall that staples will work on. Id much rather damage paint than have to fix a bunch of holes. Repainting is easier than fixing a bunch of small holes. Anyways very creative way of displaying your cars. Very nice video. I like your setup.

[@Nate_4677]

I have 224 cars but there all opened haha

[@safuanzakaria3378]

what is the name of the item you use

[@94CivicCX]

I can’t find 3/16 dividers anywhere. Any ideas?

[@timothydavidsinday8131]

what if you want to remove the moldings and move them?

[@ShawnNicklaus]

Just pull on the strip and the staples will come out with it.

[@urideamabal]

Nice, I've seen this type of display, but you couldn't move the cars around easily. I've a pneumatic stapler, that would probably work better, for keeping the staples flat. Thanks....✌

[@ShawnNicklaus]

A pneumatic stapler would be great! Good idea, thank you!

[@MascarDisplays]

Hey Shawn! We have some die-cast displays we would love to get in your hands!

[@ShawnNicklaus]

Hey! That sounds great, I sent you a PM

[@BlutigerKeksFTW]

No Chance at a German Wall Dude Thats the truth 😉

[@alex_castillo]

Liked

[@marcoantoniomarquezperez2652]

very cool exhibition man. I have a similar method. Except mine is a piece of plywood with same type of divider method. I've made a bunch of these and I can move them around the room. I paint them , put stickers on them and I can even hang them up on the wall. Each section slides in 14 cars and I do them with 5 rows. So my exhibit holds around 68-70 cars give ot take a few depending on size of cars. I also notice that longer cras like caddy's might not always slide in smoothly. I also use staples. For my wall exhitis I use huge white racks like the ones used in swapmeets to hang merchandise. . The spaces are just thr right size for a blister and you can use the J hook to hang them. The racks I use hold 200 cars. That's worth the price of the 12 dollars I pay for each rack..

[@prince_8159]

It's not cheap but I use some magnets which I stick in the wall using hot glue and a piece of tape in the protector case but I only use this method in my RLC or some of my high value cars

[@balltillwefall210]

Where did you purchase those dividers at?

[@ShawnNicklaus]

Home Depot!

[@balltillwefall210]

@@ShawnNicklaus thx

[@annalee7714]

Wait… are you using a CHASE as your sample car??!! 😲

[@ShawnNicklaus]

Yes 😂

[@GottiRC]

I think if the white was black it would look alot better

[@ThrowsHawk]

Bu ürünün adının ne olduğunu biri söyleyebilir mi ?

[@burakturksever]

profil diye geciyor Turkiyede

[@appraiser1717]

I bet this guy gets tons of girls with that room!!

[@PrakosoKoko]

When you have solid wall, this tutorial not for you and me 😅

[@GoodEdits437]

Thats what I though 😢

[@tech_bulid_miniature]

Hey bro can you give me one car ?❤

[@yaldrammuqadis]

bro has them in the laundry room! One clogged dryer vent and those will be the first thing to go

[@gowithgus4122]

Not him using a chase to drag it up and down the wall