This video explains how to do a foundation plan in AutoCAD. If you are interested in one on one tutoring you can head over to reacheducation... and book a session with me.
Пікірлер: 55
@mr.cargill4 жыл бұрын
Good day everyone. I hope this video helped you. Remember to subscribe for more technical drawing and AutoCAD content.
@blur_x1 Жыл бұрын
foundation is by far one of the simplest plans, thanks sir your explanations were great
@mr.cargill Жыл бұрын
You're welcome. 🙏
@ryanpusey3 ай бұрын
thank you soo much .love watch yo video ready fi exam monday
@mr.cargill3 ай бұрын
You're welcome. Happy to help.
@janehustle92344 жыл бұрын
I'm an interior design student in Canada currently struggling to understand the concept of how to build structures and to simply use the software in general. I am currently using a mac so I'm already at a disadvantage to an extent but you did awesome job on your explanation either way :) .
@mr.cargill4 жыл бұрын
Thank You very much I hope that my future videos will continue to help you.
@Cockroach-yp9bl Жыл бұрын
Don't worry. It's just about commands. Just observe physical objects and basic dimensions for particular building sections
@emmanuelnjuguna6619 Жыл бұрын
Have you done a second video continuing from where you've left off the first one has really helped
@mr.cargill Жыл бұрын
Good day, I have not. The only thing that would be left to do is to dimension the site plan.
@Mikhaela3214 жыл бұрын
Thank you, keep doing what you doing :)
@elninarosebelza27 Жыл бұрын
Good afternoon sir I can't seem to find the video discussing about the dimensions in a foundation plan.
@mr.cargill Жыл бұрын
kzbin.info/www/bejne/eIWXaqqeZbObZ68 Good day. The video above shows how to dimension a floor plan. The dimensions for the site plan will be similar. The first dimension line will be for the stiffeners and the spaces between them, the second dimension line is for room size and wall width (just like the second dimension line for the floor plan) and the third dimension line is for the overall measurement.
@cherryplayzytbaconsarecool97622 жыл бұрын
Sir, I am mimicking what you are doing for my SBA. I am required to label the foundation plan. What are the labels and what lines do they refer to?
@mr.cargill2 жыл бұрын
Label the L type, I type and T type stiffeners. You lable them by drawing a circle around them in broken lines and then naning them then draw an arrow from the name to the circle
@kashigotcash Жыл бұрын
Question Where on the plan should stiffeners be located at which corners rooms etc
@mr.cargill Жыл бұрын
The typical rule of thumb is that you want to have at least one for every 10 feet.
@badara96883 жыл бұрын
this video was very helpful
@mr.cargill3 жыл бұрын
I'm really glad that you found the video helpful.
@ivannamurphy74343 жыл бұрын
can we use fillet to join the lines instead of extending them and then trimming the excess?
@mr.cargill3 жыл бұрын
Good day, yes you could.
@Cockroach-yp9bl Жыл бұрын
Yeah but sometimes it creates round chamfers if lines don't meet at a specific point. But you can control it by using offset precisely.
@kholiwedube7540 Жыл бұрын
Are the stiffeners the same thing as placing columns?
@mr.cargill Жыл бұрын
The stiffeners are the column footings.
@kxngjaymusiq17834 жыл бұрын
Can do a video on roof plan
@mr.cargill4 жыл бұрын
kzbin.info/www/bejne/hXrOXnauo7-sgKs
@FaheemKhan-rp3uh4 жыл бұрын
What's the name of these I, L and T shaped things? What's the minimum standard distance between them on footings?
@mr.cargill4 жыл бұрын
They are called stiffeners. The minimum distance between them is 10 feet.
@shaniafoo28782 жыл бұрын
When you offset by 150, what is it in actual measurements?
@mr.cargill2 жыл бұрын
It is actually 150 mm in real life which is 6 inches. 25 mm is 1 inch, actually 23 ¼ mm makes 1 inch but we just round it off to 25 to make the calculations easier.
@shaniafoo28782 жыл бұрын
@@mr.cargill okay THANK YOU
@mr.cargill2 жыл бұрын
@@shaniafoo2878 Always welcome.
@Cockroach-yp9bl Жыл бұрын
It all depends on the setting of unit and dimensions. If you use the architectural unit with inches then the offset would be in feet("+ ent).
@kxngjaymusiq17834 жыл бұрын
Respect bro G
@mattsumler90642 жыл бұрын
I'm needing a pretty small job done for me, Can I hire you to do the job?
@mr.cargill2 жыл бұрын
What exactly do you need to be done?
@mr.cargill2 жыл бұрын
You can email me @ dontaecargill@gmail.com
@happy88713 жыл бұрын
Thank you Sir
@mr.cargill3 жыл бұрын
You are welcome.
@daniellekiethestiaga89262 жыл бұрын
Can I have a question ⁉️
@daniellekiethestiaga89262 жыл бұрын
What are the steps of using CAD to Draw Foundation plans??
@mr.cargill2 жыл бұрын
Good day, all the steps are explained in detail in the video.
@ceeblamaxamed99213 жыл бұрын
What is unit you using 150mm 😯
@mr.cargill3 жыл бұрын
I'm not clear on what you are asking but the unit that I use for all my drawings is milimeters
@sh3llbac Жыл бұрын
what measurement are you using?
@mr.cargill Жыл бұрын
My units are in millimeters.
@tyriqueofficial Жыл бұрын
W
@yagnya19933 жыл бұрын
Good explanation yet not clear...good job
@marlobrown96973 жыл бұрын
Me g why did you use foundations for the closets. This makes things more complicated you needed to remove the two closets and just do the main walls don’t miss lead students these walls don’t need foundation they are none load bearing!
@mr.cargill3 жыл бұрын
Good day, you do have a point. The closet walls may or may not be load-bearing walls, this foundation plan was done in abstract so there is not a roof plan or floor plan to match it, therefore we do not know whether or not they are load-bearing. I should have made mention of that in the video. Thank you very much for your comment.
@marlobrown96973 жыл бұрын
@@mr.cargill I like the video very good please create the columns ass block to be stored remember but loving these videos gonna let my class see them
@mr.cargill3 жыл бұрын
@@marlobrown9697 I really appreciate that. Glad you like the videos