How to DOME Resin Letter Keychains? | 2 Ways of Doming | Small Business Idea | Tiktok Inspired

A doming resin mixes in a thicker surface tension and is going to stay on the surface of something without sides.
How to successfully do this? Watch the video and try it yourself :) It's so easy than you thought. It will give your resin projects a beautiful and clean finish :)
Epoxy shop: invol.co/cl20ho6
Dried flowers: invol.co/cl20i57
Please do SUBSCRIBE :)
Related searches:
#domingresin
#howtodomeresin
resin doming technique
how to resin doming
resin letter keychains
how to resin
resin with me
small business idea
small business check
tiktok small business check

[@momshienics1871]

Hello po paulit ulit ko po pinapanood mga video mo, para matuto po ako,bago magsimula, at bago po bumili ng materials, laking tulong po sa mga newbies❤️

[@EjoysArtSpace29]

Hello po 😊 salamat po. Goodluck po sa pagsisimula nyo 😊 don't forget to buy mask and nitrile gloves for your safety po...

[@momshienics1871]

@@EjoysArtSpace29 thank you po sa pagsagot.. Sana po gumawa din po kau video kung ano ano po ung mga kailangan sa pagsisimula ng resin business, para isang video nalang po papanoorin ko.. Thank you po 😊

[@EjoysArtSpace29]

@@momshienics1871 okay po, gagawa po ako soon 😊

[@momshienics1871]

@@EjoysArtSpace29 Thank you po, hintayin ko po❤️

[@EjoysArtSpace29]

@@momshienics1871 thanks po

[@blucreatemolds2204]

That came out soo cuteeee

[@EjoysArtSpace29]

Thank you!

[@genesiagomes3068]

Que 🩷🩷🩷 vou tentar fazer um parecido

[@EjoysArtSpace29]

Thank you 🎀 😊 happy crafting

[@CristinaBraga-zw5et]

São lindas peças, mas o doming é para mim,o mais difícil, porque acho que a resina tem uma espessura diferente para não escorrer🤔

[@EjoysArtSpace29]

Just let it rest for a while, then you check for it's consistency of it's ready

[@shantelSheGlitterzzz]

I'm just learning so thank you so very much for sharing your tips

[@EjoysArtSpace29]

Am glad of help 😊

[@dorothycaridine6246]

I enjoyed your video on dooming. thank you nice work!

[@EjoysArtSpace29]

💖

[@JM_1989]

The problem with torching it or using a lighter to remove the bubbles when doming is that the mold get stuck or bonds to the cast. Idk, but it always happens to me.

[@EjoysArtSpace29]

Yes, I experienced that also. Now, i just spray 99.9% alcohol to pop the bubbles.

[@marlenvelas1852]

Thank you for this video,now I know how to do it. I was scared to do it 🤣😜

[@EjoysArtSpace29]

Am glad of help. Good luck 😊

[@ntaylor1144]

Hi I really enjoy your work. It very helpful to me as a beginner. Do you dome both sides of your key chains?

[@EjoysArtSpace29]

Thank you 🎀 😊 no. Just the front

[@MileyonDisney]

Hi! I'm new to your channel. You make some pretty resin pieces.

[@EjoysArtSpace29]

Thank you ❤️

[@MAGICTOUCH_MUMBAI]

Nice done...Nice idea for air bubble remove👍👍👍Use Small oil can for dropping resin instead of stick.

[@EjoysArtSpace29]

Thank you for the tip 😊

[@caressasaima]

How long does it take the dooming to dry? Or do you need uv light? I got 1:1 epoxy

[@EjoysArtSpace29]

If you are using regular resin, it will take 24 hours. If you are using UV resin, you can cure it for 2-3 minutes under UV lamp

[@arifsannakki1537]

Thank you so much it's really help me

[@EjoysArtSpace29]

Am glad of help 😊

[@kellsliving3220]

can not wait to order this look fun

[@ayshapatel9769]

Hi mashaallah I like your videos beautiful can u tell me which resin do you used plz and whr you purchase

[@lydiaaclarkee1924]

There Stunning ❤️ Thanks

[@EjoysArtSpace29]

Thank you 😊

[@sagittarius5622]

Full support sissy 😘may ads kna congratulations great job❣️

[@EjoysArtSpace29]

Thank you 😊

[@humeraakhtar2574]

Lovely 🌹

[@EjoysArtSpace29]

Thank you 🎀 😊

[@django3899]

Thank you so much because I was wondering if you could dome while the letters were still in the mould❤️

[@EjoysArtSpace29]

Am glad of help 😊 just dont put too much

[@django3899]

@@EjoysArtSpace29 thanks and you’re very talented, they’re gorgeous 💖💖

[@EjoysArtSpace29]

@@django3899 thank you so much 😊

[@THEQUEENSAMPSON]

Thanks for the video

[@EjoysArtSpace29]

Am glad of help. Thank you 😊

[@Machenziethemodel]

Pretty

[@EjoysArtSpace29]

You are. Thank you. ❤️

[@lindatoews5265]

Love your videos! Thank you

[@EjoysArtSpace29]

Thank you 😊 🎀

[@jaydominguez7389]

Hi @Ejoy when you do the doming, is it the plain resin you use it you mix a tiny batch of the resin and the hardener together?

[@EjoysArtSpace29]

It's the mixture of epoxy and hardener. I usually use the excess from making Keychains.

[@megumi123]

Gustong gusto ko tlga tong channel mo, gusto kong gawin.. interesting kc..

[@EjoysArtSpace29]

Try mo Sis 😊 lalo na at may sakura flowers jan, magnda un ilagay sa resin 😍 pwede manguha ng sakura flowers jan? Kahit ung nalaglag na sa lupa?

[@megumi123]

@@EjoysArtSpace29 kya nga sis, kaso yung sand needs db, kaso pg fresh, d pwde.. d p ko nkakapagsearch kung sand meron nun.. mgandang business yan eh.. kya interesado rin ko..kso medyo bz sa maraming bagay, pero gustong gusto kong gawin.. hehe.. pag may time uli ko, panoorin ko p iba mo videos..

[@EjoysArtSpace29]

@@megumi123 kung wla ka pang mabilhan ng silica sand, pwede namn book press sis, ipitin mo lng sa book ung flowers for 1 week 😊 or baka meron jan na mga online shop din na nagbebenta ng dried flowers na

[@megumi123]

@@EjoysArtSpace29 yun nga ginagawa ko sis, sa books.. kso mgnda yan sayo.. hehe..

[@EjoysArtSpace29]

@@megumi123 tingin ko Sis merong silica sand jan sa Japan, ksi advanced lgi yan sila eh..try mo lng maghanap jan 😊👍🏻

[@skevident]

I have an problem with making keychain 2tyms i tried but no finishing .. Using 2 diff colors but effect goes wrong front n back what is the mistake m dng plz help me

[@EjoysArtSpace29]

Wait for the resin to get thicken before pouring

[@sophier3590]

What can i do to prevent bubbles appearing after the resin is hard? I added dry flowers and there were no bubbles but i noticed after it hardened bubbles appeard, I used a heat gun, tourch and made sure there were no bubbles before putting under a UV light but still bubbles appeard after it hardened. Don't know what to do really!!

[@EjoysArtSpace29]

You have to check on it time to time and pop the bubbles while curing. Or, you can coat the flowers with resin first before pouring it with resin.

[@sunfiyaabuthahir5688]

Hi… really loved this keychain❤ At what price you will sell this dried flower keychain?

[@margie41620]

Hi, which is the front part of the letter? Where you pour the bottom or the top where you finish pouring the resin?🤔

[@EjoysArtSpace29]

Hi. The front part is the is where the flower is facing. I pour the top part. My mold is front facing

[@uniqueexpressionsartwork5252]

These are gorgeous!!! How do you make holes in them?

[@EjoysArtSpace29]

Thank you 😊 I'm using mini electric hand drill

[@ariannalue1263]

What is the shine something she’s putting on the resin letters after it’s finished?

[@EjoysArtSpace29]

It's the same mixture of resin for doming or top coating

[@ariannalue1263]

@@EjoysArtSpace29 so why do you put it over the letter again? To make it shiney?

[@EjoysArtSpace29]

@@ariannalue1263 yes, and i also put it of the top is rough when the flowers floated. I also put em to give it a nice finish.

[@shamsishadman425]

Doming ke liye apne resin hardner kitna maximum liya hai ek keychain k liye kitta leng resin hardner sis pllz i need help

[@EjoysArtSpace29]

For doming, you need to mix the part A and Part B too.

[@kristieshaw9339]

Wouldn’t it be a better idea not to pour the second coat of clear so the gold flakes stick to the first layer and not rise up..

[@EjoysArtSpace29]

Yes, it is. I only discovered that later after makin this video 😅 thank you ❤️

[@jeanesteves1718]

Hello gd evening po ask ko lng po kung saan po kayo nakabili ng silicon alphabet molds and numbers. Matagal n po kase aq naghahanap nyan hirap aq mag hanap dto sa japan . saka silicon bracelet molds . maramami naman po aq molds yan lng po ang wala.

[@potpotchumacera4951]

What kind of flower did you use?

[@EjoysArtSpace29]

Real Dried flowers you can order online.

[@megumi123]

By the way, congrats kc my ads kana.. full support sayo sis.. stay blogging

[@EjoysArtSpace29]

Thank you Sis 😊 support kita until magkaroon ka na rin ng ads mo Sis 😊

[@megumi123]

@@EjoysArtSpace29 nku mtgal p un sis.. d nmn ko ngmamadali magka ads.. prang nageenjoy lang din ko magupload at ishare sa iba lalo n dyn s pinas.. kc wala sten mga ganito db..

[@EjoysArtSpace29]

@@megumi123 kaya yan Sis 😊👍🏻 tiwala lng,

[@audreycooper2960]

Which type of doming is better?

[@EjoysArtSpace29]

2nd one

[@carolesc2589]

New subscriber po.. sobrang ganda ng videos nyo nakakawala ng stress. Gusto ko lang po malaman ano po gamit pag doming? A or B or mixed of both chemicals po?

[@EjoysArtSpace29]

Hi. Thank you 😊 mixed po ng A and B. Yung mismong mixture po na pang-gawa ng Keychain din ang pang-doming. Usually ung mga tira-tira ang pinang-do-dome ko 😊

[@carolesc2589]

I see.. Salamat po sa pag-pansin. Nakaka-inspire po ang mga videos niyo.. wishing you more subscribers and viewers po. God bless ♥️

[@EjoysArtSpace29]

Salamat Carol. 😊 Good luck din sa resin journey mo.

[@Nikkiii.m]

So with doming it’s the same ratio as when you first started the keychains ?

[@EjoysArtSpace29]

Yes

[@oreocookiesssss]

Hello! Did you use dome resin or the same resin you used in the mold?

[@EjoysArtSpace29]

Same resin

[@ushavijaysatti4707]

Which brand resin will u use

[@EjoysArtSpace29]

It's a local brand called Trueman

[@mscath8678]

Sa pag dodome po kya pwedeng gamitin sa pag dome. Ang UV resin khit ang ginamit po sa mols ay epoxy resin.. at san pra san po yung alcohol na sinasabi thank you i hope masagot 😌

[@EjoysArtSpace29]

Yes po ,nagdodome ako gamit ang UV kahit epoxy resin ginamit ko sa paggawa ng letters. Ang alcohol ink po ang pang-kulay sa resin.

[@Aangel452]

What flowers are you using please, just beautiful, well done and thanks for the tutorial🌼

[@EjoysArtSpace29]

Those are called Pressed Flowers 😊 look from any online shops.

[@EjoysArtSpace29]

Thank you so much and good luck for trying 😊

[@priscilalacuadra4770]

How do I prep the dooming can you please explain it to me

[@EjoysArtSpace29]

Just mix the same resin you use for creating the letters. Let it thicken a bit before pouring.

[@jadenong]

Hello po ano ibig sabihin ng doming?

[@Oneza3008]

How you sand the sharp edges without ruining them?

[@EjoysArtSpace29]

I don't sand them 😊 doming really helps to minimize thw sharp edges

[@EjoysArtSpace29]

If you wanna sand the edges without ruining them, you can use nail sanding buffer 😊 then you can just brush thin resin on the parts where you sanded.

[@girlmomonabudget7709]

Once you dome the sharp edges are covered

[@EjoysArtSpace29]

@@girlmomonabudget7709 the sharp corners aren't really covered, sanding em will do good 😊 thanks!

[@shubasinisubramaniam7053]

hi. Is that compulsory for add coating? The coating can do before take out from mold? can I know why you use lighter? How many days have to wait for the alphabet to become hard? Sorry I ask a lot of questions and I'm a beginner

[@EjoysArtSpace29]

Hi. Nope, not compulsory. I only do it when the top is rough or uneven. No, you can't do it while it's still on the mold, it'll run on the sides of the letters. I use lighter to pop the bubbles on the surface. Curing time depends on the brand and type of resin you're gonna use. There is slow-curing resin, usually takes 3-5 days to cure, commonly use for deep pouring and fast-curing resin, takes only 6-12 hours to completely cure which is ideal for Keychains, pendants and other small projects.

[@stefaniemorales9467]

@@EjoysArtSpace29 how about po yung J. Spencer na epoxy resin na ginagamit nyo po? Ilang hours po bago pwede idemold po? Salamat

[@alondramorales9977]

Do you use heat resistant resin? Sometimes I’m scared to make some keychains for friends/selling and not knowing if the regular epoxy resin will melt…?

[@EjoysArtSpace29]

Heat-resistant resin is more expensive than th regular one but is really good to use. Regular resin will only melt at certain temp. Just don't leave it inside the car under scorching heat, or anywhere under direct sunlight or direct heat.

[@alondramorales9977]

Thank you so much!!! 🥰

[@laurenbrookes4041]

Fab video! They look great. Do you have to dome the letters? Would you be able to resin letters without doming? Xx

[@EjoysArtSpace29]

Hi Lauren! Thanks! ❤️ Doming isn't actually required. I usually do this when some pieces have a rough top coz of the flowers bulging while curing. And yes, you would be able to resin letters without doming. I do it when I receive bulk orders 😊

[@laurenbrookes4041]

@@EjoysArtSpace29 ohh fab!! Thanks for getting back to me. Stay safe :) xx

[@EjoysArtSpace29]

@@laurenbrookes4041 thank you 😊 you too.

[@carynzhou651]

Hi, how long did you wait for doming after pouring second layer resin ?

[@EjoysArtSpace29]

Until it's fully cured. 6-12 hours depending on your resin brand

[@carynzhou651]

Great! Thankyou so much for sharing!🥰

[@fhamnavarro8878]

Very helpful. New subscriber here 💕

[@EjoysArtSpace29]

Thank you ❤️ am glad of help

[@iqraimaan7554]

How to correct the sharp edges😢

[@EjoysArtSpace29]

Sand it using sanding paper or nail file

[@makebaheskey1844]

Can you tell me why my letter came out bendy?

[@EjoysArtSpace29]

Not mix properly . How did you mix your resin? What's the ratio?

[@jhanvikhaniya3499]

Hi maam i made letter Keychains and the back part of the keychain is not drying it's still sticky so is it okay if i add more resin on it and let it dry

[@EjoysArtSpace29]

How many hours did you let it cure?

[@sharrondawson9548]

Where was the end product out of the mould

[@EjoysArtSpace29]

Hi. It was a rushed order so I wasn't able to film it. I already packed it and gave to the client.

[@renelle6733]

Lovely artwork how do you get the hole in the mold for the chain ?

[@EjoysArtSpace29]

Hi. I used mini manual hand drill.

[@SM-xy6vb]

Hi im hving problems with my doming, i always missed out on the edges, the resin doesnt cover the edges. please help, i feel like giving up. 😢

[@EjoysArtSpace29]

If that happens, it means you don't put enough resin. Always remember, put enough but not too much when doming. One tip, let your resin be tacky before you dome. It will help you to decide if you need to put more or not.

[@SM-xy6vb]

@@EjoysArtSpace29 thank you so much dear for your reply and tip on my problem. Tacky you mean to let it get thick?

[@EjoysArtSpace29]

@@SM-xy6vb yes 😊 but not too thick.

[@hiteshitasharma6475]

Hello ma'am, i tried resin alphabets for the first time.. I got the mould with holes ..but now during attaching the key ring, i realized the hole is big to fit the eye ring ..what could be the solution for this

[@EjoysArtSpace29]

Hello. What exactly is your problem? Your eye ring is smaller? 😅

[@eckyfumparkid3096]

You need jump rings Eye rings are for after drilling into pieces without holes to start with.

[@daphnee8613]

Hi po for your Plastic Packaging for the keychain ano po size ng plastic gamit nio po

[@EjoysArtSpace29]

Hi. 7x7 😊😊

[@mscath8678]

Pwede po magtanong yung nilagay nyo po ba sa letter mold Is epoxy resin and yung coating nya sa ibabaw na nilagay nyo ay uv resin

[@EjoysArtSpace29]

Dito po sa video, ung epoxy resin mixture din po ang ginamit ko

[@EjoysArtSpace29]

Usually, ung mga natitirang resin po ang ginagamit ko pang-dome. Kapag gumawa ako ng letters at may sobra ,un ang ginagamit ko para mag dome

[@abdulmaliktahirov2012]

Hi how big is the letters, and from where buy mold

[@EjoysArtSpace29]

Hi. 2 and half inches. I bought it from local online shop. But you can try lookin for it on amazon or ali express. Just search for resin letter mold. Thank you.

[@safwanqureshi3091]

After doming how much time we have to wait ..?

[@EjoysArtSpace29]

Depending on your resin, must be 3-6 hours

[@mantikamahbuba2550]

Which light do you use for drying?

[@EjoysArtSpace29]

If you're using UV RESIN, use UV LAMP. If you're using Epoxy Resin, you don't need uv lamp. It'll cure on its own.

[@abatkiannecailar.3178]

How many hours will cure the dome? Becauce mine is 2 days from now, it's not fully cured :(( stressed

[@EjoysArtSpace29]

Baka po kulang sa hardener ang measurement nyo. Anong brand po ng resin gamit nyo?

[@abatkiannecailar.3178]

@@EjoysArtSpace29 jspencer po, I used weighing scale po para tama po ang measurement. Naka-dalawang beses na po akong dome, but still di pa din po tuyo. Kaya I sand it out po and ang sticky na po nung top ng keychain. Don't know what should I do na po. :((

[@EjoysArtSpace29]

@@abatkiannecailar.3178 maulan po ba jan sa inyo? Nakakaapekto din po ksi ang weather.

[@EjoysArtSpace29]

@@abatkiannecailar.3178 try nyo po ilagay sa ref. Pero ilagay nyo po muna sa plastic container. Ksi po toxic yan habang nagcu-cure. Pag hindi pa rin po effective. Charge to experience na lang po and then sa next project nyo po, dagdagan nyo ng konting hardener para sure na mag-cure po. Hindi po ba expired ang nabili nyong resin?

[@gayusrini1654]

How to start a business material link

[@EjoysArtSpace29]

Please check the video description on my latest uploads for the links

[@FabianaSantos-hg7dn]

Hi, my namne is Fabiana and i'm from Portugal. Sorry my English.. it´s not so good! How do you make the glitter not just be on one side of the letters? And how long after you take it out of the mold? 12 hours, 24 hours? Please, I'm starting and I've been having some difficulty ... Thanks

[@EjoysArtSpace29]

Hi Fabiana 😊 the glitter or gold flakes, mix it with resin before you put it on your letter. 24 hours is the best time to demold or take it out of the mold 😊 good luck!

[@EjoysArtSpace29]

And your English is amazing ❤️

[@FabianaSantos-hg7dn]

@@EjoysArtSpace29 watching your videos, i noticed that you teach to put one layer of transparent resine to which you call dooming, is that it? As i dont have the pigment or flowers or gold flakes, i only use glitter to do the keychains. I also saw in other videos that if you put one layer of resine and then wait a couple of hours, and in the second layer put the glitter mixed with the resine. Also after, let dry 12 hours and then I do the "dooming", Is there a easier way to make the glitter not to go only to one side? Thank you for answering me 💕

[@EjoysArtSpace29]

@@FabianaSantos-hg7dn hi again! Yes, that's called Doming, when you put thin layer of resin on your finish product. The easiest way to avoid the glitters goin on just one side of mold is to put a lot of glitters. If you put lot of glitters and pour it all in your mold, it will not stay on one side only but the whole mold. I hope i made it clear. If not, please do watch my tutorial of WILLOW BY TAYLOR SWIFT ON MP3 PLAYER. I used glitters there.

[@EjoysArtSpace29]

@@FabianaSantos-hg7dn please watch this kzbin.info/www/bejne/p5qse51jf9iXfbs I used glitters in that tutorial.

[@TheJourneyofJayEli]

Hey, do you polish your pieces after?

[@EjoysArtSpace29]

Just the edges. I use nail file.

[@janebacolod640]

Hi! I keep watching your videos and i just realized i purchased an inverted alphabet mold :( will it still turn out shiny after i dome it? I know i just have to be careful to put the flowers and all right side down so that it will face front when done... oh no haven't even started yet, mali na :(

[@EjoysArtSpace29]

Don't worry po. Magiging shiny pa rin po 😊 yes po, lagi nyo lng po tatandaan na baliktad ung mold nyo kya dpat po baliktad din ung pag-desin 😊 mgnda rin nmn po gmitin yang inverted mold. Good luck po.

[@yestyongday]

Thank you for the video! Very helpful. Question sa UV resin, everytime nilalagay ko sya sa uv light, nag cucurl yung mold na gamit ko. How to prevent this? Thank you :)

[@EjoysArtSpace29]

Hi! Once lang ako nakagamit ng UV Resin at napansin ko rin ng na ganung ang nangyayare. May nabasa ako dati na usually kapag cheap ang UV Resin ang gamit, nagiging gnun. Pero try mo rin na saglit lng ilagay sa UV lamp, then kapag mejo matigas na sya tanggalin mo muna saglit, mga 30 seconds, then balik mo ulit sa lamp.

[@yestyongday]

@@EjoysArtSpace29 thank you sa repky, anong magandang brand ng uv resin?

[@EjoysArtSpace29]

@@yestyongday isang brand pa lang po ang na-try ko, ung quiao quiao po sa shopee

[@hanaartsandfashions4942]

How long do we have to wait after doing?

[@EjoysArtSpace29]

6-12 hours depending on your resin

[@fefehake]

How do you measure your resin please.

[@EjoysArtSpace29]

Digital scale. The brand of resin i used in this video is 2:1, therefore, 2 parts Epoxy and 1 part hardener, that would be 10g of epoxy and 5g of hardener. You can add more if you need a lot. Like, 20g epoxy, 10g hardener.

[@dennismurga1642]

What is dooming ? Is it the exposy resin you use to doom?

[@EjoysArtSpace29]

Doming is putting thin resin at the top of your piece. Yes , i also use the same mixture.

[@iyhamdelfino1547]

@@EjoysArtSpace29 doming is same ratio lang din po pag nagawa ng mixture ng gagawing keychain or epoxy lng po sya?

[@EjoysArtSpace29]

@@iyhamdelfino1547 yes po. Usually ung mga tira-tira ang ginagamit ko pang - dome

[@perljen]

@@EjoysArtSpace29 pwde ba stock ung mix na resin and hardener kunyari marami natira.pwde po ba un stock? Or lagay sa isang bottle.?

[@EjoysArtSpace29]

@@perljen kapag mixed na, ndi po

[@orblynrosemalabarbas6864]

Hi sis pwede magtanong mga ilan amount po ang mixture ng hardener and epoxy resin po ang pag binenta po yung isang keychain mga. maggkano kaya pwedeng ibenta? Thank you sana soon makagawa narin ako nyan new subscriber mo po ako God bless.

[@EjoysArtSpace29]

Sa isang Keychain po ay 10g. Depende rin po sa letters, kasi magkakaiba ung sukat ng letters. Halimbawa, mas marami needed sa M kaysa sa L. Depende po sa design nyo ang presyo. Pero ang range po ay 65-130. Mas mahal ung customized like nagpapalagay ng names, ng umbilical cord, ng hair.

[@orblynrosemalabarbas6864]

@@EjoysArtSpace29 Thank you sis question po ulit both side po ba dapat idome po?

[@EjoysArtSpace29]

@@orblynrosemalabarbas6864 ung harap lng po

[@marizalana]

Hello ask poako if ano tawag sa parang gold na linalagay niyo po hehe ang ganda kasi

[@EjoysArtSpace29]

Hi. Gold Flakes resin filler

[@corpuzalessandrao.3221]

Jello po ask ko lang po sana if sobrang tigas po dapt ang kalalabasan ng resin keychain after macure?

[@EjoysArtSpace29]

Yes po

[@michellesallerson8201]

Do you let the resin sit to make it thicker?

[@EjoysArtSpace29]

Yes, for 15 minutes.

[@ashleighmorris2729]

Do you dome both sides? Or just the front ?

[@EjoysArtSpace29]

Just front

[@jayshreegandhi3112]

Between two layers need to wait to dry??

[@EjoysArtSpace29]

Yes.

[@moldenimaginoo2734]

Ma'am ask ko lang kung ano size ng letters na gamit mo?fast casting po or slow curing gamit na resin? Kapag po tumigad na like mga after 6 hours ,tsaka magdodome, another 6 hours po ba un uli? Salamat po.

[@EjoysArtSpace29]

Size of 1 and half inches. Fast casting po gamit ko kapag maliliit na projects. Yes po. Depende po un sa resin na gagamitin nyo. May mga resin po kais na kahit 6 hours na ay malambot pa rin. I suggest po na fast-curing ang bilhin nyo kung mainipin kayo like me 😅

[@perljen]

@@EjoysArtSpace29 may ma suggest ka ba fast curing? Tnx same lng ba un ng resin and hardener?

[@EjoysArtSpace29]

@@perljen Trendy Resin po. Nope. Magkaiba po yun. Pero kailangan mong paghaluin un para tumigas

[@dannireacts781]

Better question. What is the purpose of doming?

[@EjoysArtSpace29]

Hi. It helps to smoothen the rough top part of your keychains when the flowers floated while curing and leaves bumps, usually happens with baby's breath flowers. It also gives your piece an elegant finish compared to just flat top. And it minimize sharp edges.

[@dannireacts781]

@@EjoysArtSpace29 oh wow. Awesome! Thank you.

[@EjoysArtSpace29]

Welcome 😊

[@michellesallerson8201]

What does doming actually mean? Is it different than a top coat?

[@EjoysArtSpace29]

Doming is usually pouring thick resin because it has higher viscosity so it won't run on the edges and overflow. Can obly be done to resin projects that can sit flat on a surface. On the other hand, Top coat is thin coating on the resin project. Can be applied to any shape of resin project that you will make like earrings, pendants with irregular shapes. That's how I understand it. Thanks 😊

[@michellesallerson8201]

I use KS Casting resin for my molds so what type of thicker resin would I put on top?

[@EjoysArtSpace29]

@@michellesallerson8201 you can use that. Just let it sit for at least 15 minutes to thicken. Once, thicken, you can dome your projects. Don't put a lot, just enough.

[@marvelyngonzaga1769]

May ads na! 👏👏👏👏🎉🎉🎉🎊🎊🎊

[@EjoysArtSpace29]

Yup, thanks 😊

[@marvelyngonzaga1769]

@@EjoysArtSpace29 sahod is waving! ☺

[@justineb.4576]

Hi po magkano po punuhan mo ? Yung bili mo lahat sa mga ganyan Pati yung molder at dry flowers at key chain holder ?

[@EjoysArtSpace29]

Hi. Nasa 6k po lahat 😊

[@mendara2181]

Quantas horas pode desenformar ??

[@EjoysArtSpace29]

Depende da marca da resina. Se você usar resina de secagem rápida, poderá desmoldá-la após 6 horas. Se você usar resina de secagem lenta, só poderá desmoldar após 3-5 dias.

[@anythingaboutlife7827]

ang pagdome po ba yan yong sasapawan mo ng clear epoxy po?

[@EjoysArtSpace29]

Yep

[@dxklp2497]

Where did u get the molding from?

[@EjoysArtSpace29]

Here shopee.ph/product/100797700/7051025015?smtt=0.117789536-1626865221.9

[@carleisethompson5365]

Why are you adding more resin?

[@EjoysArtSpace29]

To dome it. It gives your piece a very clean and somewhat elegant finish.

[@carleisethompson5365]

@@EjoysArtSpace29 ok so after they cure just add a lil more resin? Thanks for getting back with me

[@EjoysArtSpace29]

@@carleisethompson5365 yup

[@sunfiyaabuthahir5688]

What is the minimum price you fix for your keychain??

[@sunfiyaabuthahir5688]

Hello

[@EjoysArtSpace29]

$5-$10

[@soniyakukreja4656]

What was the depth of alphabetical mould?

[@soniyakukreja4656]

Depth of each alphabet? It isn't possible

[@EjoysArtSpace29]

@@soniyakukreja4656 oh, i mean mm. My bad.

[@sharmainerodriguez5222]

Tuyo po yung ina-apply-an nyo ng another batch yun po ang doming?😇

[@EjoysArtSpace29]

Yes po 😊

[@jamiepascual9176]

Hello po okay lang ba gumamit ng UV lamp for curing the dome? Or mas okay po i-cure gamit ang sunlight?

[@EjoysArtSpace29]

Kapag ang gamit nyo pong resin ay UV din, pwede po. Pero kapag ndi po po UV, sunlight po ang kailangan.

[@perljen]

@@EjoysArtSpace29 aftr mo ba mag dome tinatakpan mo letter? Tnx pease i need ur answer

[@EjoysArtSpace29]

@@perljen yes po. Para di malagyan ng alikabok or mga insekto o dumi

[@perljen]

@@EjoysArtSpace29 maraming salamat sa mga info. Sobra lking tulong sakin.❤❤❤

[@asmyrasheikh7478]

Mould link plzz

[@EjoysArtSpace29]

It's on the video description

[@louwellrospostrero2038]

Hi po.thank po sa videos. Nakakatulong po sa akin para makastart ng ganitong business. Tanong lang po may inorder akong letter mold na baligtad yung letters. Hindi po sya tulad ng sa inyo, okay lang kaya yun?

[@EjoysArtSpace29]

Hi po. Ang twag po sa inorder nyo ay inverted letter mold. Okay lng rin nmn po gamitin. Medyo nakakalito lang po kasi ang design po na gusto nyo na maging unahan ay ung nasa ilalim. Kaya dapat pag magde-design kayo, palagi nyo po isipin na yung nasa ilalim ang magiging design sa ibabaw kapag tinanggal nyo na po.

[@louwellrospostrero2038]

@@EjoysArtSpace29 oh nooo.. Sana pala hindi yun ang binili ko..huhuhu.. Salamat po sa inyo.

[@EjoysArtSpace29]

Don't worry. Madali lng rin namang gamitin yan 😊 goodluck!

[@louwellrospostrero2038]

@@EjoysArtSpace29 thank you po..

[@sunitajain3159]

At what price should I sell this keychains??

[@EjoysArtSpace29]

The prices of raw materials varies depending on where you live especially the shipment fees. So I suggest that you download the app Craft Pricing Calculator for more accurate prices for your product.

[@sunitajain3159]

@@EjoysArtSpace29 thankyou so much ❤️ But if u r selling this keychains then at what price????

[@EjoysArtSpace29]

@@sunitajain3159 i just sell it for 65-130 pesos depending on the design or if it's customised like putting umbilical cord or first haircut, fist nail cut or pictures.

[@shane_marie]

kailangan po fully cured na before mag-dome?

[@EjoysArtSpace29]

Yes po. Or bendy, pwede ba rin po.

[@Khushboo.ckaria]

Which glue do you apply ?

[@Khushboo.ckaria]

????

[@EjoysArtSpace29]

It's Epoxy Resin

[@Khushboo.ckaria]

How you dome it ? Vho edges mai spre nhi hota ?

[@Khushboo.ckaria]

Spread

[@Khushboo.ckaria]

Keychain khrb nhi hota

[@ponnita7970]

I love your work ❤ where do you get your materials from?

[@EjoysArtSpace29]

Hi. I got them from Shopee. Please check out my video kzbin.info/www/bejne/nKecdJh5Zdmaisk

[@katrinan5895]

Hi! How do you stop the resin from dripping down the sides of the letters?

[@EjoysArtSpace29]

Hi. Don't put too much. If you think you put too much, use cotton buds to get it.

[@cesarpalma6626]

ano Yung gold nanilalagay nyu po?saan nkakabili?ty

[@EjoysArtSpace29]

Gold foil po. Sa shopee po marami

[@de-philvlogs5026]

Dried flowers poh bah gamit nyu?

[@EjoysArtSpace29]

Yes po

[@cumpacec134]

ano po ung pinang dome nyo pure resin lamg po or may halo ng hardener?ty

[@EjoysArtSpace29]

Mix po ng epoxy at hardener

[@cumpacec134]

@@EjoysArtSpace29 thankyou so much💓

[@laasya_.creates]

Hi what grams if ratio and hardener do you pour can you pls tell

[@EjoysArtSpace29]

Hi. That's 30g epoxy and 15g hardener

[@laasya_.creates]

Is it same for epoke art resin also the Indian brand

[@laasya_.creates]

And how many spoons of resin and hardener do we need to pour from measurement spoons. And can we also add extra resin like 20 grams.

[@EjoysArtSpace29]

@@laasya_.creates if the ratio is 2:1 in that brand, yes same

[@EjoysArtSpace29]

@@laasya_.creates if you're using an epoxy brand that has a ratio of 2:1, using measuring spoon, you can try 2tbsp of epoxy and 1 tbsp of hardener