How To Draft a Fitted Skirt Pattern For Beginners (Tips applicable to Plus size / curvy figures)

[@raquelm8655]

I tried the skirt last week and it fits like a glove. Perfect! I am a beginner and struggled with the lining so it took me a little longer to sew but it came out very nice! I will definitely make it again but without attaching the lining to the hem.

[@GraceyStitches]

I’m happy to hear this, especially from a beginner. This proves that my tutorials are beginner-friendly!💃 You did a good job 👏 . Lining takes more time and skills but of course, with consistent practise, you’ll master it in no time. And yes, you do not have to attach them at the hem if you don’t want it all closed up. In fact, that’s easier. Just ensure that the length of the lining is at least 3” shorter than the main length of your skirt. Thanks for the review

[@raquelm8655]

Thank you! One more question. Can I combine this skirt with your bodice tutorial to make a dress? Should I eliminate the step where you depress the waist by 1/2 inch in the front when doing a dress?

[@misspriceless9695]

She’s indeed a good teacher ❤

[@GraceyStitches]

@@raquelm8655 No. When joining the bodice to the skirt, don’t skip that step. You still have to depress the waist of the skirt. However, you may need to adjust your darts so that they’ll align.

[@stylerightthebest-dk9ok]

Thank you ma'am, you are a good teacher. I just discovered you today. And I like what I watched

[@GraceyStitches]

Thank you!

[@oluwayemisiakaaka3163]

This is the most perfect skirt tutorial I have watched, I give u 💯.percent This is exactly how we sew skirt in Bénin Republic. Most tutorial hide hints but u didn't , bravo!!! I will subscribe to your channel for this reason

[@GraceyStitches]

Wow, thank you!

[@gabriellekassab7168]

I just made this skirt and it is amazing, what a fabulous video. Be super carefully when sewing the correct zip allowance and seam allowance! Thank you Gracey, this has made my week.

[@GraceyStitches]

I’m glad you liked it. Thanks for trying it and giving a feedback. It means a lot ❤️❤️

[@tigerbutterfly7784]

💖💖💖💖💖💕 Your tutorial is so comprehensive! This is the first skirt tutorial I've seen that did not leave out any information. You are a diamond 💎! Thanks again I appreciate your teaching! 💖💖💕💕💕💕💕💖💖💖💖💖🙂

[@GraceyStitches]

Awwwnnnn Thank you so much ❤️❤️

[@Botlhale_]

I wish I could upload a picture here so you could see the skirt I made from watching this video 😭😭❤️❤️❤️it fits so perfectly,it didn't require any alterations,it's so beautiful,the zip falls so well at the back,thank you a million times!! ❤️❤️❤️💓❣️❣️❣️😭😭😭

[@GraceyStitches]

I am so happy that you loved the outcome and thanks for giving us a feedback💃❤ You can tag me on facebook or send the picture to my inbox. Here's the link to my facebook account facebook.com/gracey.stitches.7

[@toyinkoleade2842]

Love your tutorial. This is the most detailed video i have ever watched on skirt. God bless you.

[@GraceyStitches]

Thank you

[@leben1856]

Great job. You are a teacher indeed. Keep it up and God bless you

[@GraceyStitches]

Thanks a lot

[@BEA_DIARIES]

Omg... This video is a life changer for me. I've been looking for ways to get my skirts flat on my tummy and back. Thank you so much for this video!

[@suzzysteve1207]

Wow! God bless you! I have searched for how to make a fitted skirt curved at the buttocks but nothing. This is a treasure to me!!!!

[@GraceyStitches]

I am glad that you found this content. Thanks for the feedback. Watch out for more content this year

[@nyaraichabikwa3522]

Well detailed and explained..thank you

[@GraceyStitches]

Glad it was helpful!

[@dorcasotene110]

I did this and it worked perfectly for the client. Weldone

[@mirabelobijiaku8780]

Excellent video with tested results. U r blessed Ma. Thanks for sharing all these secrets

[@GraceyStitches]

I’m glad you found it useful You’re welcome

[@fatmataweigl13]

Great video. Guys listen to her, follow all her steps and directions. My skirt came out perfectly. Thank you very much.

[@GraceyStitches]

Thank you so much for coming back to mention this. I really appreciate you 🙏🏿. This will motivate others to watch❤️ ....and yes, I’m glad that your skirt came out great💃

[@peacheshill1950]

@@GraceyStitches mama if I tell you I can even start doing with u do how do you learn to draw paper you know how long I trying but like my brain don't understand it simple videos can I learn learn please

[@GraceyStitches]

@@peacheshill1950 Hi sis. Learning takes time Practise practise and practise Use paper to draw patterns Buy cheap cotton fabric to try sewing first Take your time to listen to all the instructions one by one If possible, watch the video first then practise it as each instruction is given And if you have any questions, drop them and I’ll definitely respond to you

[@adebawobusayo9546]

Wow ! You are a great teacher ! I understood every bit of your explanation. Keep it up.

[@GraceyStitches]

Thank you 😊

[@Pavel_ullrich_couture]

Genial tutorial! I have never thinked about a skirt pattern this way! You gave me So much motivation and positive energy, thank you Very much, greetings from czech Republic ❤️

[@GraceyStitches]

Thank you so much ❤️

[@phyllisgordon6577]

Great tips. You are an excellent teacher. God bless you.

[@GraceyStitches]

Thank you God bless you too🌹

[@lynetterene]

This makes so much sense....may have to watch a few times. Thanks so much for sharing

[@GraceyStitches]

You are so welcome!

[@AfterSchoolEnglish]

This is the MOST helpful sewing tutorial on KZbin! Thank you! I love getting clothes fitted and made in the DRC, because really the understanding of feminine body is much better there. Now I can make my own! Thank you, thank you!

[@GraceyStitches]

I'm so glad you found it helpful! Thank you. Please stay tuned for more exciting tutorial.

[@Rara-pr9wg]

I like how you spoke about the fit....many ppl just draft skirts for one body type...well done...new subscriber

[@GraceyStitches]

I try as much as I can to explain everything I know about what I'm making and that's why most times, my videos are long especially the sewing tutorials. Thanks so much for the compliment 🙏and for subscribing❤

[@meenafernandez1292]

Hi Gracey you are a wonderful teacher, God bless all your present and future projects with success

[@GraceyStitches]

Thank you so much for your kind words. God bless you too

[@omololababarinde5499]

You are simply amazing! Thank you for this detailed video on skirt measurements and fittings.

[@GraceyStitches]

You are so welcome!

[@elizabethfrancois2344]

Great Great video only person to show a draft for a heavy seated person excellent much thanks

[@blinkymoni5648]

The fit i got after following yr tutorial is just amazing 🥰 God bless you

[@GraceyStitches]

❤️❤️

[@simpledioma]

You are great. Am sure going to give it a try. Nothing is annoying as the wrinkles you see on your dress after all the stress of making a cloth. Thank you for this tutorial

[@GraceyStitches]

Thank you for giving me such a beautiful comment on a Wednesday morning. It’ll sure go a long way with me🌹 I’m glad you like the tutorial and I’m sure that the outcome will be perfect💯. Please try it.

[@lilianagada6238]

I don't know how to thank you enough ... . I did mine today and it came out perfect .. ❤️💜

[@OjoAdewumi]

Thank you very much ma'am. God bless you. Please can it be fused to a top basic bodice to make a gown?

[@GraceyStitches]

@@OjoAdewumi absolutely!! It’ll make the perfect gown. ☺️ you’re welcome

[@OjoAdewumi]

@@GraceyStitches thank you ma'am Please do you have tutorial on how to draft yoked bustier with sweetheart neckline?

[@gwensmale7675]

This is really good. Well done. Please keep this standard of tutorials. Please do not change. The details and information was very enjoyable. Even the waterfall jacket. I loved it as well. Thank you. Waiting for me videos from you Sis.

[@GraceyStitches]

Thank you so much. I really appreciate your kind words and motivation. Please feel free to share my channel link with your friends. ...and stay tuned for more😄❤

[@favourchinedum6444]

Wow. Awesome video. I took my time to read through all the comments and your responses I must say I have learnt a lot. Thank you so much.

[@GraceyStitches]

❤️❤️

[@akanchawaloveth7907]

Thank you so much but can I add band on it just like that?

[@GraceyStitches]

Oh yes, you can.

[@MsSpringbunny]

Thank you so much for this video! I used to have so much trouble with fitting over the buttocks. With 27.5" waist and 39" hips, I can't wait to try your tutorial. Thank you!!

[@GraceyStitches]

Oh! You'll love the outcome!

[@tashanilindsay7220]

Thank you very much for the video.l always wonder how to get that perfect fit.

[@nanakwakyewaa2076]

Please how did you get the hip depth again... the 7.5?

[@mabelakande1202]

Hello Gracey thanks for the video. Please did you take the dart from the paper because of the skirt I did not notice the dart line ?

[@GraceyStitches]

Please watch from 10:20 and 18:00 respectively

[@LebohangGumede]

Thank you so much Sisi. Made mine and it’s a perfect fit 👌🏽

[@GraceyStitches]

So glad!

[@glittergwyn]

This is great. Do you have a detailed video for trousers? Taking into acc whether the person has a flat bottom or a curvy one? I'm still trying to figure out crotch measurement.

[@GraceyStitches]

Unfortunately, I do not have a video on trousers at the moment. However, your best bet for measuring the crotch is to first find your natural waist and tie a rope or tape around it then option 1 - sit on a hard surface chair and measure from your side waist down the chair OR option 2 - stand up straight and measure from your front waist line through your crotch to the back waist line - divide the answer by 2, subtract 1.5" to get the front crotch and add 1.5" to get the back crotch.

[@glittergwyn]

@@GraceyStitches Thank you! I have tried both but didn't know how to use those numbers. I didn't know about the 1.5" bit. Will certainly try again with that.❤️

[@GraceyStitches]

@@glittergwyn yes, please do.

[@chareseshinabery]

Great tutorial! Cant wait to cut into my fabric!

[@GraceyStitches]

Wonderful!

[@minerva5025]

Great Tutorial Gracey, I took notes of your important points and will be trying out this way of making a skirt. Thank you.

[@GraceyStitches]

Thank you❤️ Yes please try it out. I’m certain that the outcome will be great.

[@ThreadsbyIona]

Worked perfectly for me, thank you for your wonderful teaching and God bless.

[@GraceyStitches]

You're welcome!

[@user-fi6tt3oj4v]

THANK YOU! This was an amazing video!!

[@GraceyStitches]

@@user-fi6tt3oj4v ❤️❤️

[@chiamakamaryrichnwankwo4409]

You are a great teacher and you just gained a subscriber 💃💃💃💃💃

[@GraceyStitches]

I have been waiting for someone to tell me that...and you just did💃💃💃. It means a lot to me and it will go long way. Thank you❤

[@chiamakamaryrichnwankwo4409]

Gracey Stitches I will be anticipating more videos. Keep it up 👍

[@dorisudechukwu4005]

You're a good teacher, you've gained a new subscriber 🥰

[@GraceyStitches]

This means a lot. Thank you so much❤.

[@Marylin44]

Pls when you follow this method when shaping or sewing it together would you divide the hip by 4 ?

[@GraceyStitches]

Hello You do not need any extra shaping. When you’re sewing, just take in the exact seam allowance that you added on your pattern/fabric.

[@InChristAlone13]

Would love to see how you draft your bustier patterns, it would be very helpful if you can, I have tried a few, I have a feeling yours will be what I need. Thanks

[@GraceyStitches]

It's on the way.... stay tuned.✌ Thank you for trusting what I do.❤

[@InChristAlone13]

🥰🥰

[@InChristAlone13]

I am looking forward to it

[@ibgurl]

Wow... This tutorial is awesome. Very understable. I wish I can like it 10 times. I give this video a 5 star. God bless you. More wisdom. 😍😘😘

[@glitzyeyezz5252]

PERFECT FIT: omg I followed your instructions and got the fit.you are an genius. I have so many muslins lying around drafted with so many tutorials. I almost gave up.You saved me. Thanks. Can you please make a basic bodice video for stretchy and non stretchy fabric for bigger bust sizes(48-52) who have smaller upper bust(43-45) and waist(38-40)?

[@GraceyStitches]

You are so welcome! I,m glad I could help Regarding your request, please give this tutorial a try kzbin.info/www/bejne/iZbUmZuoaK6YrKc

[@narayanasamyadhi5452]

Do you have videos to draft long pants? Thank you

[@GraceyStitches]

Currently, I do not.

[@maryakweyu7632]

Very clear teaching. Wow. Loved this one very much.

[@GraceyStitches]

Thank you 🙏🏿

[@maryakweyu7632]

Could you please show how to cut and sew the skirt with zip and waist band. Thank you.

[@GraceyStitches]

@@maryakweyu7632 okay 👌

[@igwenagupearl2463]

The o.5 you used for front waist contouring did you add it to the back?

[@GraceyStitches]

No

[@gloryanyaoha217]

Please can this skirt pattern be used for a pencil gown with half length

[@GraceyStitches]

Definitely! Tested and trusted!

[@gloryanyaoha217]

Thank you very much for replying, I appreciate

[@ifeomaezekwem6327]

Really appreciate the effort you made in making this video very detailed and well explanatory even to a beginner like me. Thanks a million times.

[@kerenokereke4174]

Excellent tutorial. Will try this out. That means this method could also apply to the bodice because of the bust. Can you do a tutorial on that as well.

[@GraceyStitches]

Hello. I'm glad you like the skirt tutorial. Please try it out. Regarding the bodice, I do not allocate more to the front than the back. All we need for the front bodice is an adequate 'cup' to accommodate the bust and luckily, the front has 2 darts FROM DIFFERRENT DIRECTIONS to help us achieve that cup effect (waist & bust dart)...although we can add up to 2 darts on the skirt to get the bum effect as well... I recently started a series on how to draft different bodice pattern. You can start from here kzbin.info/www/bejne/iZbUmZuoaK6YrKc for the bodice pattern or here kzbin.info/www/bejne/lZK4ZJmXjJ15b80 if you want to know more about measurements too.

[@1971rec]

Very clear tutorial. Thanks

[@GraceyStitches]

Glad it was helpful!

[@teresabradford623]

This skirt fits like a dream! Can you make a video for making slacks or trousers for wide hips and a narrow waist?

[@GraceyStitches]

I am happy that your skirt fits! Your request is noted.

[@blessingjoshua7341]

Wow beautiful I have made mine, the outcome is so beautiful thank you dear

[@GraceyStitches]

You are welcome 😊

[@uchennaegbuniwe5185]

I just made a short pencil skirt using this tutorial video as a guide... Omoooo! It's sooooo good! Fits so well and looks unbelievable on my body. Thank you so much for this.💕❤️ Please drop a trouser tutorial🥺

[@GraceyStitches]

Wonderful!

[@gloriaanimasnr.3312]

Wow, just love your step-by-step tutorials 🤝👏

[@lisamensah7342]

I love this video thanks so much. Pls how much ease do you add so you can sit down without it being tight?

[@GraceyStitches]

For me, I add 0.25" ease allowance when on fold (making 1" in total). As long as your measurements were not taking tightly (but firmly) , 1" ease allowance (in total) is perfect. Thanks for watching..

[@lisamensah7342]

@@GraceyStitches thanks so much for your help. Can this technique also be use to do a dress?

[@babarindeoladayo1634]

I have listen to skirt illustrations but this is a wow... And please what is the slit distance at the back.. Does the slit varies from person to person or size to size? Thank you.

[@GraceyStitches]

Hi The slit varies per individual if you’re making a custom wear. I like mine about 6” above my knee while some like theirs even higher or covered. But on the average, 5” above knee is okay

[@redahriches5159]

Ma how can I sew it please, with different hip measurements as in back and front measurement

[@GraceyStitches]

Hi. It’s very easy. Just match the sides of the front and the back patterns together. Here’s the sewing tutorial👇 kzbin.info/www/bejne/iH-rZH2lpJKMrLs

[@glorybisong4554]

Thanks for sharing ma ,May God bless you well detailed I will give it a try 👌👌👌👌💯💯

[@GraceyStitches]

You are welcome 😊

[@toyomary9584]

It is possible to add a band to this pattern with alteration on the waist

[@GraceyStitches]

Yes. You can cut it straight or better, cut it following the waist line with your desired band height Add seam allowances all round

[@Lizzys_talks]

Thanks so much for this. Just what I was looking for. God bless you

[@GraceyStitches]

Amen. Thank you You might want to check these too👇 Here, I explained the cutting and sewing of the skirt on fabric. kzbin.info/www/bejne/b3XGl6OqbdSbhKc kzbin.info/www/bejne/iH-rZH2lpJKMrLs

[@nadiakassim672]

Thanks for this tutorial...but pls if I want to add a band do I remove 2" from the vertical measurements. Because I didn't see you add band

[@GraceyStitches]

You're welcome. The skirt is bandless hence i didn't include a band in the tutorial. For a high waist skirt (close to your underbust) , add your 2 inches band above what you already drafted. But if you want the skirt to be exactly on your waist line (the one you measured), draft your skirt as illustrated. Use a masking tape to close up your darts, cut out 2" from the top part, use that pattern to construct your band while the tape is still holing the dart. You can remove the tape from the other part of the skirt before you cut your fabric. Remember to add your joining allowances at the top part and on the band.

[@nadiakassim672]

@@GraceyStitches if I cut out 2" from the drafted skirt, won't it affect the dart? It means I will cut the darts as well. Please explain further

[@chisomakaegbusi2471]

Thanks so much, I tried it and it came out perfect

[@GraceyStitches]

💃 You’re welcome

[@hannahsmithyankey7208]

Pls for a long pencil skirt how many inches do u go down on the hem of the skirt for a fitted one

[@GraceyStitches]

Did you mean by how many inches do I go in at the hem for a fitted long skirt? If yes, I take About 2” - 3.5” in. It depends on how tapered you want it to be.

[@eno-obongudo7699]

Thank you so much, please is this applicable when drafting a pencil gown? Like i mean the down part basically.

[@GraceyStitches]

Yes, it is applicable for both skirts and gowns.

[@faithijeoma552]

This tutorial is a life saver.... I am about to work with a hip 50 and waist 34.... Pls how many inches dart should I use. Also before joining the sides together, do I make the front hip 1 inch smaller than the back? Or do I divide the measurement equally?

[@GraceyStitches]

A 1.5” dart (0.75”) will be okay. Yes, always allocate more to the back hips than the front

[@chikafavour793]

Hi gracey, please where do you get your brown paper from

[@GraceyStitches]

Hi If you don’t get from fabric stores or those who sell sewing accessories/tools, you should get from stationery stores.

[@Furs.N.Feathereez]

Good evening ma'am, the last part where you took in 0.5inch at the waist can it be done on a dress that has half-cut?

[@GraceyStitches]

Hello Yes, it can.

[@Furs.N.Feathereez]

@@GraceyStitches we really love to see a tutorial on this 🤕

[@TobiElla12]

Hi dose this apply to sewing a dress too?

[@GraceyStitches]

Absolutely!

[@yvonneokello9558]

Hello, how do you get your waist point? Like yours is 7.5, how did you get that? Thanks.

[@GraceyStitches]

@@yvonneokello9558 Hello I have 2 videos on how to take comprehensive body measurements. Please watch them. You’ll get yours perfectly kzbin.info/aero/PLUazqsYdvwaAacrPEk6NRbd32HGce5EXW&si=BP5geHHlPa0daIVT

[@fatouthiam-em4sh]

Thank you so much🙏🏾🙏🏾🥰 God bless you

[@GraceyStitches]

Thank you!

[@elohoaluya250]

Lovely tutorial. When cutting the front you said to get a pencil skirt all we need do is deduct 1 inch from the hip measurement and mark at the hem of the skirt at the side. My question is for the back pattern do we deduct the same one inch at the side or center back

[@GraceyStitches]

Hello. deduct the 1" at the side

[@barbarabaiden8842]

Very helpful tutorial. But how is the depressing of the waist applicable when sewing a fitted dress

[@GraceyStitches]

Hello, after depressing the skirt, join it to the bodice. You'll get a perfect fit

[@sstangtu2309]

Your video is self explanatory

[@themissdeeshow]

Please if u don’t measure the hip depth Is Der a formula to get it?

[@GraceyStitches]

@@themissdeeshow From experience, I’d use 7.5” - 8” for S/M 8” - 8.5” for L 9” for XL

[@Bankkyblack]

I'm using this skirt method for a mermaid gown,with half cut. Do I still need to do the slanting by 1 " at the centre front of the skirt before joining to the upper bodice. Also hope the part at the back were we used hip/2 + 1 will not affect the knee area.

[@GraceyStitches]

Yes, you should slant it. No, the hips measurement will not affect the knee area. Take 2" from what you have at your hips area.

[@joycelineansah8343]

Because of the subtraction nd the addition, my skirt is not adding up... should it mean that I should make the front align with the back and push all the excess of the back to make it align with the front?

[@GraceyStitches]

As long as you used your correct measurement, it will add up after sewing. Ensure to add all seam allowances as well.

[@tinahylton-dei7032]

You are a darling God bless you, very explicit thanks 👌👏👏👏👏👏👏🥰

[@GraceyStitches]

You’re very welcome 😊. Thank you for watching

[@Elyntrend]

Thank you for this lovely tutorial, please how did use ur lining to turn the slit part

[@GraceyStitches]

You're welcome For the lining, I may not be able to explain well here but if you watch my tutorial on how to make a handkerchief skirt, I demonstrated it there. Regardless of the slit, you'll still sew it the same way. Leave the slit open and sew your lining to the zipper allowance straight down to the hem. Please watch the video. You'll understand what I'm saying better 👇👇 kzbin.info/www/bejne/hJiXqZukpNmmY68

[@elizabethfolashade7186]

Thanks for d tutorial. Did u use 10.25"or 9.25" on d hem of d back pattern ? In a situation here d waist is bigger than d hip, how do i go about it?

[@GraceyStitches]

Hi. I used the hips measurement at the hem (10.25"). Where the waist is bigger, you can also allocate more to the front waist than the back waist. Also, using a stretchy fabric in that case won't be a bad idea.

[@elizabethfolashade7186]

Thanks

[@josianequenum9412]

Thanks for this very well detailed tutorial. Please have you included the band to the skirt length?

[@GraceyStitches]

Thank you for the compliment. No, I didn't include the band in the length of this skirt pattern because I was going to use it to make a high waist skirt (NB - Usually, I use 2" as my band height.) This pattern is just the foundation for a skirt. If you want a high waist skirt, draft this pattern (with your measurements) first, then cut out your band separately. But if you want a regular skirt length, draft this pattern, then cut out 2" from the top part of the pattern and use it to construct your band and then reattach it to the skirt. Don't forget to add seam allowance all around the band and the top of the skirt. I hope my explanation was clear❤

[@josianequenum9412]

@@GraceyStitches very clear many thanks Gracey Stitches i really appreciate it. Blessings

[@Zubaidah-232]

Please what if im not putting zipper but a waist band,how will i contour the back

[@GraceyStitches]

You’ll contour it the same way. After contouring just sew up your zipper allowance - close it up. Then you can fix your zipper on the seam allowance at the side

[@MegaDusk2Dawn]

I'm an extreme beginner to sewing and am a bit confused. For both drafts, you did half of the full measurements so did you cut out four parts of fabric in total? If so, how did the pattern in the front come out so seamless?

[@GraceyStitches]

The front pattern would be cut on fold while the back pattern will have 2 pieces.

[@bettyennin6335]

Awesome tutorial! Thank you

[@GraceyStitches]

You’re welcome

[@schap562]

Will this work for making a skirt out of knit fabric?

[@GraceyStitches]

Yes, it will but remember that you do not need to add extra allowances (seam and ease) when using knit fabric. Instead, you should reduce your horizontal measurements depending on the elasticity of your fabric.

[@level2456]

Hello. Aren't you adding allowance above waist to join to waistband?

[@GraceyStitches]

Yes. 0.5” above the waist line. You can include it on the pattern otherwise, on your fabric while cutting it

[@level2456]

@@GraceyStitches Much appreciated.....Will the dress fit properly if i draft the pattern with ease from the go, or is it advisable to start with block? I am asķing this because i want to cut directly from the fabric. Your kind assistance will be greatly appreciated. ✨️

[@GraceyStitches]

@@level2456 Yes, you can include the ease allowance from the go. Just note it on your pattern, if you're drafting one, so that you won't forget what you added next time you use the same block. I'd advise an ease allowance of 0.25" on fold (making 1" in total after sewing). Here: for example if your front hips is 18", that will be 18"/2 = 9" + 0.25" = 9.25"

[@level2456]

@@GraceyStitches Thanks a lot. You are very helpful....And the sewing allowance? Can i add it, without having to include it later? For instance have front waist as w/4+dart+sewing allowance, instead of w/4+dart and add sewing allowance later. Sorry for being a nuisance 🙆‍♂️

[@GraceyStitches]

@@level2456 Oh yes, since you're drafting directly on your fabric, you can include everything at the first instance. w/4+dart+ease+sewing allowance. Ensure you note your seam allowance so that you can take in the correct allowance while sewing.

[@tesiallure1998]

Very nice one sis.....but please mind the number of ""okays'' you"re applying too.... in case of your order videos bcos it was a big distraction. Thks.

[@GraceyStitches]

Thanks so much for the observation. It’s well noted.

[@ugogoldamaezihu9479]

Nice one thanks. But when joining it on the sides the back may not align with the front

[@GraceyStitches]

No, it will definitely align because the same vertical measurement was used for both tthe front and the back. Notch the hip line on both patterns before you start to sew.

[@ugogoldamaezihu9479]

@@GraceyStitches I am talking about when you are closing with final measurements... The back might be a little wider than the front panel. Except maybe one adjust from the zip allowance area. I don't know how to explain here But thanks sis I appreciate

[@GraceyStitches]

@@ugogoldamaezihu9479 oh yes! It will definitely be wider. That ‘excess’ fabric is what will hug the buttocks If you can, watch this video between 7:00 and 8:35 . Here’s the link👇I talked about it there kzbin.info/www/bejne/qmGagnuBpLyDj6c

[@BeHappyWithDownSyndrome]

Is it d same way with skirt with band

[@GraceyStitches]

Yes

[@adedoyingrace4534]

Thanks for this tutorial MA.. Please how do I join the sides together? Because the sides of the back is bigger than the front

[@GraceyStitches]

Thanks for watching I get this question a lot. But sincerely, it is the same way you join your skirts. Right sides of the front facing the right side of the back. Sew the sides and then the zipper. I think I should do a tutorial on that

[@adedoyingrace4534]

Alright MA.. That will be great 😃

[@nancythompson5423]

This is really beautiful, Thank you so much for this detailed tutorial. Just came across your page. Trying it out now but I have a question ⁉️ please after cutting and sewing,how will i take my hips measurement since the front and back are different. Should I divide by 4 and also am making a pencil skirt, the front and back are not same,how will I join them. Thank you

[@GraceyStitches]

You’re welcome. Thanks for watching About the hips, take your hips measurement normally (that is, round your hips ) and then use the formula that I mentioned in the video The sewing is also very easy. These are the steps that I follow: 1. Firstly, I iron my zipper allowance by folding it inward. The crease it forms serves as a guide when I am fixing the zipper. 2. I join the back pieces. I start sewing from about 2" above where the zipper would stop and then I sew straight down to the hem of the skirt or I stop where the slit will start (if the skirt will have a slit) 3. I fix the zipper. I use the crease that my iron has formed as a guide (see step 1) 4. I join the front piece to the back piece then I open up the seam allowances by ironing them. 5. I fix the band and lastly, 6. I hem the skirt I hope this was helpful❤

[@nancythompson5423]

@@GraceyStitches Thank you very much for your quick response but am asking about taking The final measurements considering the fact that i remove 1 inch from the front

[@GraceyStitches]

@@nancythompson5423 oh! You mean after cutting and sewing? You know what? If your draft is right then the outcome will be right as long as you cut your fabric on the right grain. But if you still want to measure after sewing, just measure round the hip line of the skirt, you should get your total hips

[@nancythompson5423]

@@GraceyStitches Thank you so much. Got it now

[@GraceyStitches]

@@nancythompson5423 you’re welcome

[@georgeharwillsgroup3213]

Wooow!!!. Great job Gracey

[@salomeyyeboah616]

im grateful i just learnt this and for free thanks

[@GraceyStitches]

Thanks for watching. Please share with others❤️

[@aguiyidivine]

Hi I hope you see this I’m a fashion designer and I started having issues when making skirt for people who have a hip of 46/47 etc but their hip bone isn’t protruding just bigger bum and this make the hip part of the skirt loose will this method work for people with large hip measurements and no protruding hip bone just rounder and more protruding back side🙏🙏🙏

[@GraceyStitches]

Hello. Of course, I read all my messages.❤ and I completely understand your description. Now, let's go back to the video. At about 15:00, I mentioned that you should measure 0.5" or 1" outside the zipper allowance right? Okay. So, where your client has an obviously bigger bum than hips like you have described, you should go into the zipper allowance by 1" NOT 0.5" (irrespective of the difference between the waist and the hips measurement). That's about the only way that we can allocate more to the bum area. There are other methods like slash and spread anyway but that's used where the bum is really big or you are working with huge plus-sizes.

[@aguiyidivine]

@@GraceyStitches thank you so much I went through fashion school and I felt i was good until i started working with different measurements and sizes thanks for the reply thanks for the knowledge 🙏🙏🙏

[@GraceyStitches]

@@aguiyidivine you’re welcome. Please try it and give us a feedback 👌

[@seamisola]

Hello ma, thanks for this tutorial. Can we use this method when making the “skirt part” of a gown?

[@GraceyStitches]

Definitely ! Please go ahead. Your result will be perfect. As long as the dress has a fitted skirt part, this is what I use. Even for A-line skirts, I use this pattern. I just transfer the darts to make it wider at the hem

[@tinaprecious5710]

Thanks for uploading,but pls how did you get 7.25inches as your hip line?

[@GraceyStitches]

Hello My hip line is 7.5” and I got it by measuring

[@GraceyStitches]

You can watch this👇👇 for more clarification kzbin.info/www/bejne/rHu6qmp4hNFlhtk

[@okekebeauty7728]

I always find your tutorials so so mesmerising 😍. Welcome ma your the bomb 💣

[@rachel475]

Thank you for this detailed tutorial been having issues with my skirt. Please I'd like to ask if the tips you mentioned here can be applied when making a fitted/pencil trouser?

[@GraceyStitches]

You're welcome. I wouldn't use this method for trouser.

[@kemiaguntasolo7659]

Thanks so much for taking your time to explain this video. You've just remove a burden from me now. My question is each time I draft a skirt for a person with big Buttocks the back length is always shorter. What can I do to eliminate that.? Thanks as I await your response

[@GraceyStitches]

Hello. When the skirt is shorter at the back, this means the bum size is more than average and it needs more room. So, what we do is this: slash and spread at the back hip line. This increases the length of the back and also gives a nice fit.

[@queennamusukwa2353]

Good explanation ma. Thank you for the information at the right time.happy to have new ideas 🌹🌹