Рет қаралды 90,448
Draw the CAM PROFILE when the ROLLER FOLLOWER moves with CYCLOIDAL MOTION during out stroke and return stroke, as given below :
1. Out stroke with maximum displacement of 31.4 mm during 180° of cam rotation,
2. Return stroke for the next 150° of cam rotation,
3. Dwell for the remaining 30° of cam rotation.
The minimum radius of the cam is 15 mm and the Roller diameter of the follower is 10 mm.
The Axis of the roller follower is offset by 10 mm towards right from the axis of cam shaft.
0:00 Understand the question
1:02 Displacement Diagram
4:40 Cam Profile
#camprofile #cycloidalmotioncamprofile #rollerfollower #camandfollower #techcad #english