How To Drill Out High Security Deadbolts with KeylessFactory Solid Carbide Bit - Medeco Drilling

www.uhs-hardwa... | Solid Carbide Specialized Heavy Duty Drill Bit For Locks & Cylinders - 6mm
*Medeco - 11TR533 - Maxum Residential - BiAxial - Captive Deadbolt - 2 3/8" Backset - 19 - Satin Nickel - DLT Keyway - Grade 1
www.uhs-hardwa...
The Maxum Deadbolt is a UL437 Listed, BHMA A156.5 Grade 1 Certified deadbolt, offering unmatched protection against unauthorized key duplication, bumping attacks, picking, drilling, wrenching, kicking, or other physical abuse. A solid 1'' hardened steel bolt in heavy gauge steel housing provides maximum defense against physical attack. This also features a Captive Thumbturn, which converts the inside cylinder to a thumbturn for easy exit when the facility is occupied. and is easily converted back to a double cylinder when unoccupied for maximum security. All by simply removing and replacing the thumbturn from the cylinder.
Features:
Can be masterkeyed into existing lock sets.
Key Control protects against duplication. Comes with two keys and a unique authorization card is issued with each key combination, and is required to order additional keys in the future.
A special elevating and rotating pin tumbler design, along with false slots on the bottom pins, mushroom top pins and a sidebar mechanism, work together, to provide superior pick resistance.
Angled cuts on the keys, along with fore and aft positioning, in the Medeco3 design, provide added dimensions that dramatically increases key combinations.
UL437 listing provides assurance that cylinders meet universal standards for drill and pick resistance and resistance against other types of forced attack.
www.uhs-hardwa...
Follow UHS:
facebook - / uhshardware
linkedin - / 20539055
twitter - / uhshardware
insta - / uhshardware

[@jackvphoenix8493]

This is an M3B (see 1:33), not a Medeco High security lock. It has no hardened steel balls protecting the screws. It is designed for low security applications to be keyed in with high security locks. The keys for the high security locks can be made to operate this lower security lock to reduce cost in non critical places. Video would be much better if you could show that this D8X can overcome the hardened balls protecting a regular M3 or the M3's two hardened steel anti-drill plates or the 3 anti-drill inserts in the plug and stainless steel tumbler pins and hardened bearing ball on the stainless steel sidebar. The M3B has none of these. You could do what you showed here with a regular drill bit.

[@logmeindog]

Good Eye! I didn't even notice the UL listing was missing from the lock face or that medeco even made an M3B! The M3B (aka. Medeco3 BiLevel) is quite rare due to it's low security but I'm surprised that it took at least two dewalt drills to gnaw through the soft brass body (1:10, 1:59) . It was probably because they're using carbide cutting tools when a regular drill bit would work much faster on low security locks such as the M3B. Probably took them 45 minutes.

[@SebastianDiPalmaVampyre]

I have been drilling Medeco & Mul-T-Lock deadbolts like this for decades with a 1/4 drill bit and done it a lot cleaner as well as more accurately to the point where I could easily plug and retap if really necessary. The tool used is a carbide burr not a drill bit.

[@monsterous289]

This appears to be a M3B, significantly less protective against drilling than the secure-certified M3

[@artkleemola5116]

I would love one of those bits but I doubt you send them to Canada

[@miguelfernandez2325]

Did it have the ball bearings in front of the screws? If not I can do it with dewalt pilot point drill bit in seconds.

[@samxu1467]

no matter what high security deadbolt it is. I just use core puller easily pulll out the core and use a screw driver to open it in 3 min or less.

[@danielwalter9983]

Core puller is great but they don’t always work some locks are designed to have areas that snap and break while your trying to pull the core

[@camronbay1]

I’ve use my plug puller on Medeco deadbolts it is fast.

[@jeffmoss26]

Is this available before, during, or after holiday friend?

[@blueridgeocean]

That ate it up as if it was a brass body

[@peasizedbrain8295]

thanks looee this is just what i needed to break into a home

[@UHSHardware]

Thanks Pea! we appreciate your wisdom! It's a good thing that a Licensed Locksmith with 1000's of other tools that can do similar illegal actions wouldn't do this though. Good luck with your quest! Let us know how the breaking and entering goes! Send some pics! Oh, but after when you need some tools to work with, come check out www.uhs-hardware.com ! ;)

[@bathroomenthusiast5949]

Go to jail.

[@danielwalter9983]

I know I’m so late to the party but I watch a lot of other subs I have but I am a big supporter of uhs hardware and have spent thousands on your equipment so I’m gonna try anyway #uhsgiveaway

[@mikegalligano2544]

This is a BiLevel lock. Not UL 437 rated, so your product is not adequate for drilling high security locks.

[@assakesomanlockman7179]

Time for a "Redesign"

[@UHSHardware]

Medeco has met it's match for now!

[@monsterous289]

Not really. From pausing the video this is actually the M3B (BiLevel) which is not security certified against drilling like the M3 is

[@elle-xu3ep]

Volume is terrible

[@davidcox9983]

I'm no longer on Facebook, as it has become to adversarial.

[@UHSHardware]

No worries, Just comment #UHSHardware and #UHSGiveaway and follow here if that's what you got my friend! Good Luck!

[@sleutelassistancebernard3702]

A European product!

[@MJAPlumbingandHVAC]

I dont think it was really that easy to break through the medeco maxum 11. It is much harder to do so.

[@jamaicanjoe1133]

i tried it and it didn't work because it woke up the homeowner :)

[@calb9727]

Uhsgiveaway

[@UHSHardware]

Nice! throw a # on the beginning and make sure you're following our page to make it official!

[@jeffrussi8362]

love uhs. they always have what i need with exceptional customer service!!!! #uhs-hardware