Is the Kick Starter Gear or pinion gear on your scooter, or any other kickstart machine stuck? This is the video for you. I used Kine Master for editing. Thank you so much!
Пікірлер: 82
@smith9515 жыл бұрын
Well what a great video I now have the confidence to do this on my own scooter you really saved my butt thanks a million
@jaredzanelli78675 жыл бұрын
No problem man
@tomayrscotland68909 ай бұрын
Well done fella I just got the same problem. but I will strip it out tomorrow. great clear explanation. Thanks.
@arionjenkins48615 жыл бұрын
You the man bro! I’ll have more questions later thanks
@jaredzanelli78675 жыл бұрын
No problem
@gpecci22532 ай бұрын
This video is very helpful. I have a Kymco People 150 with a stickie kickstart.
@buckorooster5 жыл бұрын
Wow! Very informative
@brandonroussel77074 жыл бұрын
That was actually helpfulllllll thanks my dude
@jaredzanelli78674 жыл бұрын
No problem man
@downeast4runner6752 жыл бұрын
Hey dude I have the same scooter having a hell of a time finding a carb for it, any suggestion?
@noahfreeman53772 жыл бұрын
what’s the hose for that’s attached to the engine for
@chrisblockz33373 жыл бұрын
i need help with my moped the kickstart used to go down but my transmission belt broke into peices ever since that happened i kick it down and it struggles to go down but it goes perfectly up the electric start don’t work my last hope is kickstart please can someone help out
@frankdatank25295 жыл бұрын
Thanks buddy
@podjo2k92 жыл бұрын
My aprila area51 doesn't have the clip on the pinion gear dose tat matter
@HookupCultureCommunity3 жыл бұрын
Cool, I hit mine with the pb blaster and it’s working on a charm with my ‘07 LX50. I think that little kick start gear is loose for me or sliding out because I hear a bell/singing sound when I’m riding; like the gear is scraping against the flywheel or something
@cemtkeenan27502 жыл бұрын
The bell sound is likely from the bendix
@seanhauck60343 күн бұрын
If you use the electric starter is it affected by the jammed kickstart
@michaelagan64476 ай бұрын
mine kicks the other way i used jb weld. any help please
@Hugobig1 Жыл бұрын
Does it work with 5-56?
@seanhauck60343 күн бұрын
Will it start with a battery with the kickstart jammed?
@ydolemromanackie60522 жыл бұрын
So like, what if my kickstart did that, but the moped actually turned on, and everything started grinding
@0vixie0Ай бұрын
Does it work on a 150cc
@neriacharles29852 жыл бұрын
Please help me my honda kick not working.
@blastthewolfdarkstar9146 Жыл бұрын
I took all the bolts off and it didn’t come off help
@lilman17963 жыл бұрын
Great info, ☆☆☆☆☆☆☆☆☆☆☆☆
@LOUROLDDAN3 жыл бұрын
Hate bugging about my kickstart being jammed up. I've removed cover, cleaned, lubed and it still will not go down. I've put it on 5 or 6 times, same results. When off scooter the unit works smoothly. Either I'm doing something wrong or motor is seized or some gear bearing is jacked. My electric starter doesn't work.. So I can crank that way. A guy told me I should use channel locks to try turning crankshaft... Does that sound correct ? Any suggestions appreciated. I to dang old to keep riding the MTN BIKE. Thanks
@jaredzanelli78673 жыл бұрын
That will tell you if the motor is seized up. If you turn the crank with channel locks.
@RefinedRedneckNate2 жыл бұрын
I'm sorry but you need to work on the camera angles. Every time you're explaining where something goes the camera isn't looking at it.
@PrestonMiddle6 ай бұрын
Same for 150cc ?
@beachlife4323 жыл бұрын
I have a 2015 genuine roughouse r50. And i cant get that crankshaft cover off? Took all the bolts out but it seems frozen. Is there a trick to get it off? I need it off to fix my kick starter. Seems like a spring problem but dont know till i get that damn cover off. Please help
@jaredzanelli78673 жыл бұрын
I would make sure you have all hoses and bolts off again. Then gently pry with screwdriver or something. The gasket ca just be stuck. Good luck
@UCMJ_Family_Law_Expert3 жыл бұрын
What size bolt holds the kick start lever arm on?
@mizzy43683 жыл бұрын
M8x25mm
@nmoney93thelegend944 жыл бұрын
I kick-started mine and it got loose and just slides if I just tighten the bolt will it fix it I need to know asap because I have to be to work tommorow and can't walk it's to far any tips would be great
@jaredzanelli78674 жыл бұрын
Yeah your gear is probably stripped. If tightening it more and more fails. Try to put soemthing around the gear so it won't strip anymore. Or replace gear and kickstart
@Jimmyjoejohn Жыл бұрын
So I have most of the same parts and got everything reinstalled on my Kmyco zx50 (2003) everytime I use the Kickstarter the part to the left of the moon gear (lol) fits in nicely but moves up and out of the housing and I don't know why. Suggestions?
@endreegeland3 ай бұрын
Did you fix it?
@remyllebeau774 жыл бұрын
What is that black hose going to the front of the whole case? My Tao tao atm 50 a1 has the port there, but I can't seem to find the hose that should go into it. Also, why is there a seal or gasket when there are so many open holes that let air in anyways?
@jaredzanelli78674 жыл бұрын
That hose is just a ventilation thing for the case. Also I belive it holds a vacuum, I know if you pinch that hose, it will start up easier. Not sure about that gasket tbh. Prolly for dirt/debris.
@remyllebeau774 жыл бұрын
@@jaredzanelli7867 Oh okay, thanks for the reply. So if I can't find the hose that going into that port, do you think I could safely cap it off if I can find the right size rubber cap?
@jaredzanelli78674 жыл бұрын
@@remyllebeau77 well, it Is a crankcase breather, it shouldn't be capped off. That I believe goes to the carburetor if I'm not mistaken. I would replace instead of capping off. Do a little research on the side. Look at this link. scootdawg.proboards.com/thread/51628/crankcase-valve-cover-vent-hose
@cemtkeenan27502 жыл бұрын
The gasket is mainly to prevent damaging tge cvt cover and the mating surface, gasket provides some cushion so it squishes and not the aluminum surfaces. It also helps keep a negligible amount of dirt out.
@remyllebeau772 жыл бұрын
@@cemtkeenan2750 Okay thanks.
@eddietrujillo1722 ай бұрын
Holy shit that's a Kymco top boy man ... Mine is kicking back at me after I outan aftermarket CDI why or how can I fix it
@jasoncarrada5446 Жыл бұрын
What does it mean when it’s loose the kick starter ? Mines is just dangling now and can’t start my bike
@nel14-ft7rg2 ай бұрын
Threads are stripped order a replacement kit, $60 online
@holtbirchard694203 жыл бұрын
When you took it off did oil come out?
@jaredzanelli78673 жыл бұрын
No oil
@ronnycruz49823 жыл бұрын
Bro mine makes a weird noise and I don't know how to take it off can I help me plz
@jaredzanelli78673 жыл бұрын
In the video it shows you
@lion39204 жыл бұрын
Can I ride my scooter without the kick starter ?
@jaredzanelli78674 жыл бұрын
Yes. Just a gear. You would need battery start tho.
@twenty4beats9404 жыл бұрын
hey i have the same scooter but its still stuck when i assamble it
@jaredzanelli78674 жыл бұрын
Did you make sure nothing in the gears?
@hectorguillen1221 Жыл бұрын
I fixed my quick start and now my starter pulley don’t work 😭 amén
@jordansbikes8194 жыл бұрын
You never showed us the bike starting on the kick start if ya put it back on wrong it will still spring up and down but won't engage
@endreegeland3 ай бұрын
Did you find out the solution?
@obinnabede67182 жыл бұрын
Good one, but you never showed it clearly how you loosed it and how you coupled it back.
@jcmlegacy59953 жыл бұрын
How do you get the case off after you take out the bolts
@jaredzanelli78673 жыл бұрын
Mine came right off. Maybe pry very slightly with a screwdriver
@cemtkeenan27502 жыл бұрын
I whack the rear with a rubber mallet, then tilt the top away and downwards
@eraldorh5 жыл бұрын
It only costs about £13 for a new kick start shaft.
@lucasfain44155 жыл бұрын
Hey man, i was wondering if you’d be willing to help me figure out what’s wrong with my scooters kickstarter gear? If you drop your email here I’ll send you an email with specifics and a video to show you what’s going wrong.
@jaredzanelli78675 жыл бұрын
Do I still need help?
@lucasfain50304 жыл бұрын
Hey, could you help me find a new exhaust for my 49cc rocketa?
@lucasfain44154 жыл бұрын
Jared Zanelli I was wondering if you could help me with this
@jaredzanelli78674 жыл бұрын
@@lucasfain5030 just use google. Or Ebay
@jaredzanelli78674 жыл бұрын
@@lucasfain4415 yeah send me an email. Jaredzanelli1@hotmail.com
@tainted_wolf85372 жыл бұрын
That's not a wrench that's a flathead screwdriver
@michaelagan64476 ай бұрын
lmao what a goon.
@JoseRodriguez-en8bo10 ай бұрын
The second one is the one that gets me,the wife is a bit rude but her husband is a complete ticking time bomb when he's sober, after a drink he's extremely dangerous and the cop treats them with kid gloves., for shame!!
@landonenglish64005 жыл бұрын
It's Landon english boiiiiiiii
@jaredzanelli78675 жыл бұрын
Yo
@drdrew32 жыл бұрын
Fire the camera man. He never had what you are talking about in the frame
@JAG77productions Жыл бұрын
Bruh just order a new them teeth are worn down.
@radicalrob21032 жыл бұрын
Goes n like that.. as he tilts the camera out of view!! Almost comedic, If I wasn't trying to actually see wtf u were doing!! Besides that decent job bromosexual!!
@mickrussell71982 жыл бұрын
Video sucks!!! Keep say "right here" but can't see what you're talking about!! 🤦♂️