How to Emboss with Metal| metal embossing for beginners | Ninette Kruger | pewter art tutorial

[@jamaliraki2429]

Thank you for very very nice information .

[@NinetteKruger]

You're welcome, glad you found it helpful!

[@anshulsartcraftstudio9571]

Very informative video thank you.

[@NinetteKrugerMetalArt]

You’re welcome! So happy you found it valuable 😁

[@edutekno3131]

THANKS for the 1st lesson...!!

[@NinetteKruger]

Hi Edu, my pleasure!

[@jorgeaugustocuro6362]

gracias excelente cuidense mucho

[@NinetteKruger]

You’re welcome 😁

[@dezi1768]

I enjoyed your video. Great information. Thanks for sharing!

[@NinetteKruger]

So happy you found it valuable. Please reach out if you have any questions. Kind regards, Ninette

[@stsars9609]

@@NinetteKruger Yeah your videos have been a great help to a blacksmith with till now mostly boring blades.

[@Nakshatra-2020]

Happened to know abt this art from my mom's friend n I was hunting for details on the same.thnq so much for detailed explanation on the metal itself.❤️

[@NinetteKruger]

You're so welcome, glad you found it helpful!

[@fred8816]

Hi, is there a way to emboss by hand, a tin box? Thanks for your contents!

[@NinetteKruger]

Hi Fred, yes absolutely! You can do that using our basic metal embossing techniques. For more information, you can watch some more of the tutorial videos on this channel, or visit our metal embossing courses at metalembossing.kartra.com/page/Courses

[@minithaminnoos1457]

Very detailed explanations.Thanks a lot.

[@anandavallinatarajan5775]

What wld be the cost.of one roll

[@NinetteKruger]

Hi Minitha, you're welcome, hope you found it helpful!

[@NinetteKruger]

Hi Anandavalli, please click on the link to my recommendations for metal embossing products: nkmetalembossing.kartra.com/page/Shop The final cost would depend on your location and shipping costs to where you are. Hope that helps!

[@batanghamogtv4908]

I want to learn more in your channel nice content watching from Philippines

[@NinetteKruger]

Hi Batang, so happy to hear you're enjoying the content! You can learn even more on my blog here: blog.nkmetalembossingacademy.co.nz

[@sts.sam.my.]

This is so helpful!!! Thank you very much!!

[@NinetteKruger]

Hi Sammy, so glad you found it valuable :)

[@sun-ph3fl]

That's great 😊😊💓💓💓💓

[@NinetteKrugerMetalArt]

Happy you like it 😄

[@Aluviel]

I tried 24 gage brass it was a mistake!! too hard to press into : ( I cant find any pewter on amazon.. They say that aluminum is the softest. I guess Ill try that^^ I tried the links above and they are not working. Could we get the full link please?

[@NinetteKruger]

Here you go: docs.google.com/document/d/1iIg7BXLhi3r2QXgmJ3iXb0iQw9600njFTeppQqLPtRU/edit

[@smoothskin46]

Thank you soooo much I learned a lot.

[@NinetteKruger]

Hi Jacqui, so glad you found it helpful :)

[@manishakhopkar3179]

Which colours use on metal foil ? I am using ink colours

[@NinetteKruger]

Hi Manisha, you have various options. Some people use oil paint, I’ve used acrylic paint, glass paint, metal paint, metal patina, sharpies and alcohol ink before. You just need to protect your work with a clear acrylic spray. Hope that helps 😉

[@noemisecone1377]

Hi There, could you please tell me where to buy the metal worksheets please?

[@NinetteKruger]

Hi Noemi, the links my favourite metal embossing supplies on Amazon can be found here: nkmetalembossing.kartra.com/page/Shop They ship worldwide

[@kstutz230]

@@NinetteKrugerlink doesn’t work anymore

[@NinetteKruger]

Please try this one: docs.google.com/document/d/1iIg7BXLhi3r2QXgmJ3iXb0iQw9600njFTeppQqLPtRU/edit

[@rajmohan640]

Can we use the aluminum foil which we use in kitchen

[@NinetteKruger]

Hi Raj, unfortunately you can't use kitchen foil for embossing, but there are other craft projects you can do with them. If you Google Metal foil crafts you'll see some tutorials. We use a Aluminium sheet of 0.3-0.5mm thick (36-38 Gauge in the US). Hope that helps!

[@rajmohan640]

Thanks I am from india

[@maudale]

Thank you for sharing! Why don't they make one that has a Brass/ Golden color?! I'm trying to look for one, however an actual brass sheet (even 0.3 mm) is too rigid to emboss by hand like pewter or aluminum sadly :(

[@NinetteKruger]

There is actually a golden one, will see if I can find you a link quickly

[@NinetteKruger]

@maudale, I found a red- coloured one but it seems the golden golour is out of stock at the moment. I'll keep checking: amzn.to/3CWgOlv

[@maudale]

@@NinetteKruger Thank you for your help! I have looked all over for a brass/gold colored sheet of pewter for embossing, it's so surprising that they would make it in copper, silver, red, pink and not brass/gold, it seems like a color people would want :) This is what I'm trying to recreate, it measures 64cmx52cm, it's the Sleeping Beauty prop book, which was originally made of hammered brass, but I think I would rather do it by hand and not need to hammer: Sorry the link is too long :)

[@NinetteKruger]

@@maudale You're so welcome! It seems like the gold is currently out of stock. Your project sounds lovely! Unfortunately, I can't see it...

[@elizabethandersen6009]

I don't see the colored metal sheets you showed. I have been looking all over for those...

[@NinetteKruger]

Hi Elizabeth, unfortunately there seems to be a worldwide shortage at the moment. I always got mine from Amazon, but can’t find them at the moment

[@noemisecone1377]

Please tell me where to buy the metal worksheets from Sydney, Australia.

[@NinetteKruger]

Hi Noemi, I'm an Amazon Affiliate as they ship worldwide. Herewith the link to the supplies I recommend: nkmetalembossing.kartra.com/page/Shop

[@phongdaoson1777]

how thick metal sheet is bester emboss

[@NinetteKruger]

Normally between 36-38 gauge, or 0.3-0.5mm thick

[@jaykishanart6630]

Good

[@NinetteKruger]

Thank you, and welcome!

[@hellyeah3297]

Thank you!

[@NinetteKruger]

You're welcome!

[@alzeeraworks]

Very nice..

[@alzeeraworks]

I need to engrave a brass vase. What machine do you suggest please.

[@bksunnydays5246]

Here a brass sheet is available. Will that hold the emboss?

[@NinetteKruger]

Hi BK, yes it would. Just make sure the thickness (gauge) is thin enough to emboss by hand. Normally a gauge of 38 or 38 works well, and remember to fill the back of your design with melted beeswax to keep the shape of your embossed project.

[@Ory_.]

Thank you for your help, you're adorable !

[@NinetteKruger]

Glad you found it helpful 😁

[@Khanapurpottery]

I wamt link for indian metal foil online

[@NinetteKruger]

@terracottatechnique, you can buy metal here: blog.nkmetalembossingacademy.co.nz/product-category/metal-embossing-supplies/metal-embossing-sheets/

[@Dark-legion]

can be easly cut with normal scissors and craft knifes?

[@NinetteKruger]

Hi Hamad, yes, that's correct :).

[@christapieterse335]

Hi, what is the link to buy some of these metals please.Thanks

[@Thrive_with_Ninette]

Hi Christa, here you go: nkmetalembossing.kartra.com/page/Shop

[@وحيدة-ع9ض]

If i want do big project what kind sheet used and how wold part together if you reply i thanks

[@NinetteKruger]

For larger projects, I would recommend Aluminium as its more affordable than pewter. You'll have to play around to find the best way for you to put them together. What size do you have in mind?

[@وحيدة-ع9ض]

@@NinetteKruger Thanks for your time

[@NinetteKruger]

@@وحيدة-ع9ض You're Welcome

[@DonnaSmith-it6ve]

Where can I buy a pewter rolls

[@NinetteKruger]

Hi @DonnaSmith-it6ve, you can try pewterart.ca/store/

[@enasdabbour9989]

I tried many times with aluminium foil which we cover the food with unfortunately!!! and I failed and failed and failed 🙄 until I watched your video, I shocked 🤔 when you told that don't use it, know I knew why the results were unsatisfying, it is very then , I tried and tried, I was pressing the ball pen but invain , thank you so much to clear that.

[@NinetteKruger]

Hi Enas, you're welcome! It's a common mistake my friend, glad you found the video helpful :)

[@daytoday112]

Does pewter come in colour as well?

[@NinetteKruger]

Hi Tyba, pewter doesn't, but you get colour coated aluminium sheets which you can emboss in the same way. You can add colour to pewter projects using alcohol ink, glass paint, gilding paste, shapries and even acrylic paint.

[@daytoday112]

@@NinetteKruger thank you

[@leenasagarsartcorner687]

ur new subscriber ....thanks dear

[@NinetteKruger]

Hi Leena, welcome! So happy you're here :)

[@madhavisarpatwar4790]

Thank you for very useful information. Can you please share the link from where I can buy these from India? Also which metal sheet is best for large size of painting for wall decor ? I would really appreciate your guidance.

[@NinetteKruger]

Hi Madhavi, glad you found it helpful! You can buy supplies from here: nkmetalembossing.kartra.com/page/Shop I am an Amazon affiliate and share my favourite embossing supplies. They ship worldwide. I would recommend aluminium for larger projects as it's more affordable than pewter. Hope that helps!

[@albertoaguilaraguirre7028]

La felisito. Porbidess

[@gracielasarabia7102]

Por favor, pongan subtítulos en castellano

[@hectorcolunga9436]

The Shop images dont show up :(

[@NinetteKruger]

Hi Hector, did you try opening the link in Google Chrome? nkmetalembossing.kartra.com/page/Shop

[@karimahirchy2956]

Ninette pourriez vous svp nous traduire en français

[@NinetteKruger]

J'aimerais pouvoir parler français! Malheureusement, je ne peux communiquer avec vous qu'en utilisant Google Traduction...

[@karimahirchy2956]

@@NinetteKruger ces bon merci,mais essayé svp de nous montrer le matériel nécessaire avec quoi vous travaillez les techniques pour vous suivre et bon courage

[@NinetteKruger]

@@karimahirchy2956 , blog.nkmetalembossingacademy.co.nz/basic-metal-embossing-tools-supplies-needed/

[@karimahirchy2956]

@@NinetteKruger merci beaucoup mais je vais suivre avec vous car vous m'avez envoyé là où ces en français

[@lamasat2616]

أنت جميلة جدا بزو مح مح