How to Engrave Acrylic and Metal with the Cricut Maker 3 Engraving Tool | Cricut Maker Series

  Рет қаралды 275,510

DIY Alex

DIY Alex

Күн бұрын

Пікірлер: 160
@suzetterodriguez1855
@suzetterodriguez1855 Жыл бұрын
Thank you for making videos that are straight to the point and easy to follow. At my age I don't have the time or the patience for videos that are super long and filled with fluff. You have changed my outlook on the cricut and have motivated me to get back into crafting witch is my passion. Thank you and god bless
@DIYAlex
@DIYAlex Жыл бұрын
Those are my favorite kinds of tutorials to watch, so that’s what I make! I’m so glad they’re helpful for you!
@lakshmisrinivasan7066
@lakshmisrinivasan7066 2 ай бұрын
Yes. It was straight to the point without wasting our time. Continue your good work.
@gapeach14
@gapeach14 Жыл бұрын
Just bought my Cricut Maker 3 today. I'm so excited!
@DIYAlex
@DIYAlex Жыл бұрын
Yay! Congratulations!
@galeem713
@galeem713 Жыл бұрын
I talked to cricut before buying and they told me the maker was the stronger machine.
@frankjarvie643
@frankjarvie643 6 ай бұрын
Suggestion… before buying a lot of items, or attempting your first project, watch a lot of videos, and there are a whole lot of them right here on KZbin. You’ll be happy you did. Happy crafting! 😊
@Ayakristinable
@Ayakristinable 9 ай бұрын
Thank you for being the most succinct explainer! Really helped this newbie out ❤
@DIYAlex
@DIYAlex 9 ай бұрын
I’m so glad it was helpful!
@ForeverSongMinistries
@ForeverSongMinistries Жыл бұрын
Alex, you are amazing. You beautifully explained the process and have a gifting for teaching. Thank you!
@DIYAlex
@DIYAlex Жыл бұрын
Wow, thank you!😊
@lorrainejarvis8684
@lorrainejarvis8684 Жыл бұрын
I'd like to thank you for doing Tutorials that are very well explained and all points covered. I have followed a LOT of Tutorials and I find I get frustrated and press rewind constantly as i need to revisit what they have said. Your Tutorials are super easy to follow and understand and I have learnt a lot more from you than I have from anyone else. THANK YOU
@DIYAlex
@DIYAlex Жыл бұрын
You're very welcome! I’m so glad it was helpful ☺️❤️
@anniehatessocialmedia
@anniehatessocialmedia 18 күн бұрын
I subscribed! Just ordered my Cricut Maker 3 and researching before it arrives. You did an excellent job of explaining and showing so you're on my list to come back to. Thank you!!
@abul9052
@abul9052 7 ай бұрын
Thanks for this video ❤. Thanks also for showing the bracelet even though it didn’t work out perfectly. That way we know what to expect
@DIYAlex
@DIYAlex 7 ай бұрын
Glad it was helpful! ☺️
@terrinapayne-m4j
@terrinapayne-m4j Жыл бұрын
I so need to upgrade from the joy, it’s great but limited to what you can do. The fact I can engrave has just sold it for me and you have explained it so simply!
@DIYAlex
@DIYAlex Жыл бұрын
It’s so much fun to play with the Maker tools! Though I do love my Cricut Joy too!
@mrmrsmz4987
@mrmrsmz4987 Жыл бұрын
Simple and to the point JUST WHAT I NEEDED!! THANKS
@Brunse61
@Brunse61 11 ай бұрын
This was a FANTASTIC video! Excellent instructions and to the point! Thank you so much!
@DIYAlex
@DIYAlex 11 ай бұрын
You're so welcome!
@tonyrome068
@tonyrome068 8 ай бұрын
Well done thou good and faithful servant
@sylviat8461
@sylviat8461 Жыл бұрын
You are a natural at teaching and sharing! New Subscriber here!!!!!!!
@DIYAlex
@DIYAlex Жыл бұрын
Welcome!! Thanks for subscribing! 💕
@Chester0the0Jester
@Chester0the0Jester Жыл бұрын
I did not know you could move the white wheels!!! That would have saved me a headache with a couple projects. Thanks for the info!
@DIYAlex
@DIYAlex Жыл бұрын
You’re so welcome!
@kathymurray1926
@kathymurray1926 11 ай бұрын
Better to use painter's tape to remove dust. You should also use alcohol wipe when your done. Keeps down the mess and looks much better.
@kathymurray1926
@kathymurray1926 11 ай бұрын
P.S. You also won't have the dust left on your mat.
@DIYAlex
@DIYAlex 11 ай бұрын
I love the alcohol wipe tip!! That’s a great idea.
@kathymurray1926
@kathymurray1926 11 ай бұрын
@@DIYAlex Actually the painter's tape does more than the alcohol! Keeps dust off your mat and your work space!
@madelinegrudens
@madelinegrudens Ай бұрын
Excellent tutorial, so well done and very helpful!!
@linaa7066
@linaa7066 11 ай бұрын
Thank you so much, concise and precise god bless you
@linboelz7477
@linboelz7477 Жыл бұрын
I only had time to watch a short piece of this video, but it was enough to get me to hit subscribe. Easy to follow. I don't have my machine yet so will wait until I get it so I can follow along. TY
@DIYAlex
@DIYAlex Жыл бұрын
Yay! Welcome to my Crafty Fam! Can’t wait for you to get your machine!
@jessicacollins8214
@jessicacollins8214 9 ай бұрын
You are so good at explaining things! Are you a teacher?
@DIYAlex
@DIYAlex 9 ай бұрын
Thank you so much! No, I am not a teacher but I love to teach in settings like this!! ☺️
@sylviegeai329
@sylviegeai329 9 ай бұрын
Bonjour, je ne sais pas si vous allez comprendre, merci pour ces explications, très joli projets❤❤
@marycunningham8551
@marycunningham8551 Жыл бұрын
I just bought my cricut maker 3 today and I can't wait to start using it
@anniehatessocialmedia
@anniehatessocialmedia 18 күн бұрын
How have you liked it? Have you used it a lot? I just ordered one this weekend. Still worrying if I will use it a lot or if I wasted my $$ lol
@shawnmcnamara7283
@shawnmcnamara7283 Жыл бұрын
I was wondering why my machine wasn't detecting my engraving tool...Thank you for explaining in depth!
@jens1230
@jens1230 11 ай бұрын
Great video, thank you! If you live in England like me, Hobby Craft has paid workshops where they teach how to use the Cricut. I'm definitely going to attend so I can learn with a professional in person.
@DIYAlex
@DIYAlex 11 ай бұрын
We don’t have Hobby Craft stores here, but that’s awesome! I’m glad you have that resource!
@janettesalisbury6524
@janettesalisbury6524 6 күн бұрын
I brought my cricut maker 3 from hobbycraft this morning, I too, will be taking advantage of their in store tutorials.
@LeonorGaspar58
@LeonorGaspar58 Жыл бұрын
I love the way you explain everything ❤
@DIYAlex
@DIYAlex Жыл бұрын
Thank you! ❤️
@conkgord
@conkgord 11 ай бұрын
thanks for the grear insight of the cricut maker
@Laza75
@Laza75 2 ай бұрын
So clearly explained thank you so much
@DIYAlex
@DIYAlex 2 ай бұрын
You’re welcome 😊
@angelavazquez3155
@angelavazquez3155 5 ай бұрын
Thank you, this is a fantastic tutorial!!
@mrsharp100
@mrsharp100 10 ай бұрын
You are AWESOME!!
@DIYAlex
@DIYAlex 9 ай бұрын
Thank you so much 🥰
@Pamesarey
@Pamesarey Ай бұрын
What cricket is best for engraving?
@kcimable
@kcimable 7 ай бұрын
Nice and thorough instruction! I don't have my Cricut machine yet. For engraving, cutting leather and wood veneer do you recommend the Maker as the best machine?
@DIYAlex
@DIYAlex 7 ай бұрын
Yes, the Maker/ Maker 3 is the only machine that can handle those materials.
@Lacroix999
@Lacroix999 Жыл бұрын
I’m COMPLETELY new to learning about all of this and don’t have a Cricut yet but looking to see what I need to get started with it. Does the Cricket Maker 3 machine come with a quick swap housing tool or is that separate?
@DIYAlex
@DIYAlex Жыл бұрын
The Quickswap housing is a tool that you buy separately. :) Good question!
@Lacroix999
@Lacroix999 Жыл бұрын
@@DIYAlex thanks!
@tonyalucz7226
@tonyalucz7226 Жыл бұрын
The Cricut Maker does come with the QuickSwap Rotary Blade & Housing & Premium Fine Blade & Housing.
@Lacroix999
@Lacroix999 Жыл бұрын
@@tonyalucz7226 the Maker 3 does not, at least not the one that comes without a kit. It’s compatible with it, but doesn’t come with one. I just received mine yesterday and it did not. The only thing the machine comes with is the fine point blade already installed in its blade housing, a scrap sheet of vinyl to do an initial test on an about 4 12”x12” sheets of various Smart Materials it try out. Nothing else came in my box, not even a marker or a mat like the original Maker comes with, but I purchased just the machine not in a kit and bought all my tools and supplies separately for it.
@JudyandRico
@JudyandRico 5 ай бұрын
U are my biggest fan ❤❤
@davidshafer8838
@davidshafer8838 11 ай бұрын
What backing did you use behind your finished engraving, and how did you secure/apply it? Thanks!!
@DIYAlex
@DIYAlex 11 ай бұрын
This is just a black piece of cardstock. I didn’t decide it, I just placed it on the same easel!
@JLER22023
@JLER22023 7 ай бұрын
Thank you for sharing tutorial.
@DIYAlex
@DIYAlex 7 ай бұрын
You’re welcome 😊
@mariacuret-ev3by
@mariacuret-ev3by Ай бұрын
Hi Alex, how can I engrave a photo on acrylic for a night light acrylic.
@chiaraceccherelli2516
@chiaraceccherelli2516 3 ай бұрын
Hi! Thank you for this video, i'm finding it very helpfull, I only have one question, I make my design on my own on Procreate, and i don't know how to kake them one single line, thay always are double, do you have some advice or suggestion? (Sorry for english I'm Italian)
@DIYAlex
@DIYAlex Ай бұрын
I'm not sure if you can make single line designs with Procreate. You may have to put it in a program like Illustrator to make them single line.
@RebeccaBancarz
@RebeccaBancarz 4 ай бұрын
Does the modge podge make it look more like wood ? Is that why it was used ?
@DIYAlex
@DIYAlex 4 ай бұрын
I didn’t use any mod podge in this tutorial
@Chellybelly_813
@Chellybelly_813 Жыл бұрын
Love this idea
@createdby_justus
@createdby_justus 10 ай бұрын
if I wanted to add foiling to the engraved designs would I just lay the foiling of the design and essentially redo everything with the heat foiling pen?
@DIYAlex
@DIYAlex 10 ай бұрын
Foil won't stick to anything but cardstock unfortunately!
@sonyaotway6421
@sonyaotway6421 2 ай бұрын
I'm new to Cricut world. I've just bought an explore 3. Will it handle engraving too?
@DIYAlex
@DIYAlex Ай бұрын
Yes, but the process is different. You can learn how here: kzbin.info/www/bejne/gJKok6aDetCUmqs
@marbowl3
@marbowl3 Жыл бұрын
Just came to this video, love your tutorial. Got mine a year ago and never open the box, now I will. I did not get the information packet that’s why I came to you tube.
@DIYAlex
@DIYAlex 10 ай бұрын
I hope this gave you some guidance! Welcome to the Cricut crafting community!
@janettelewis6746
@janettelewis6746 Жыл бұрын
Thanks. Thread so fun
@CreationsbyKimberly
@CreationsbyKimberly Жыл бұрын
Can you use Snapmat for engraving?
@DIYAlex
@DIYAlex Жыл бұрын
I don’t think so, but I could be wrong about that!
@ayeshaazhar6891
@ayeshaazhar6891 Жыл бұрын
That was awesome... Thank you so much 😊
@DIYAlex
@DIYAlex Жыл бұрын
You are so welcome!
@deeryn
@deeryn Жыл бұрын
Thank you for your tutorial ❤
@DIYAlex
@DIYAlex Жыл бұрын
You're welcome 😊
@mariangela21ful
@mariangela21ful Жыл бұрын
Hi, what is the thickest metal item you can engrave. I was wondering if you can engrave a metal square lighter
@DIYAlex
@DIYAlex Жыл бұрын
No, you will only be able to engrave flat metal blanks. You would have to use a laser to engrave a lighter, and I'm not sure how safe that would be so you would want to find out more information before trying that.
@pop-popmoose5359
@pop-popmoose5359 Жыл бұрын
I have the Maker 3 with the Cricut engraver tool. I set up my project and secured my acrylic to my cutting mat. When I went to select the acrylic it showed the 2mm acrylic and the1mm acrylic, but they were not selectable. It said they were not compatible with my hardware. I spent hours trying to get it and I was ready to throw the maker on the floor. My firmware and software are both up to date. Any suggestions???
@DIYAlex
@DIYAlex Жыл бұрын
Make sure the operation is set to engrave for all your lines. That should fix the issue!
@earphbound720
@earphbound720 Жыл бұрын
GOD bless you!
@dawnclements1664
@dawnclements1664 9 ай бұрын
My Maker acrylic blank from michaels says 1.9in but when i load into my maker 3 it makes a horrible sound like its too thick??? Is there another adjustment i should be doing?
@DIYAlex
@DIYAlex 9 ай бұрын
1.9 inches is way too thick for the Cricut Maker. If it’s makes a bad sound definitely stop and reevaluate. Unfortunately it coming from Michael’s doesn’t mean it’s going to be compatible with the Maker.
@patriciajackson3883
@patriciajackson3883 Жыл бұрын
Thank You for sharing this is there any other metal that I can use
@DIYAlex
@DIYAlex Жыл бұрын
Acrylic and different kinds of metal are all that I’m aware of!
@SassyShelly
@SassyShelly Жыл бұрын
I would be so worried about the acrylic or metal dust getting down inside the machine. Is that an issue ever?
@DIYAlex
@DIYAlex Жыл бұрын
I’ve never heard of that being an issue
@tobeconfirmed.6052
@tobeconfirmed.6052 Жыл бұрын
Awesome 👍😎
@nancyruiz5164
@nancyruiz5164 Жыл бұрын
That was great
@KarinaMalpica-i3o
@KarinaMalpica-i3o 10 ай бұрын
Hi Alex, I clicked on both links for the metal bracelets and they are not working.
@DIYAlex
@DIYAlex 9 ай бұрын
Ok I will work on that! Thanks!
@andreaverdel9083
@andreaverdel9083 Жыл бұрын
I have set-up all my materials the same way but for some reason it won't let me select acrylic. Is there a work around? I receive a. message that the tool is not compatible with this material.
@DIYAlex
@DIYAlex Жыл бұрын
Is the operation set to engrave? That’s the first thing I would check
@andreaverdel9083
@andreaverdel9083 Жыл бұрын
​@DIYAlex yes its set to engrave and it won't allow me to select acrylic
@crumble7598
@crumble7598 9 күн бұрын
What would happen if you didnt attach? Great video btw
@elenachiricuta8304
@elenachiricuta8304 Жыл бұрын
Great video! Thank you very much.
@candyvela3806
@candyvela3806 Жыл бұрын
Where can I find the weeding pen you use in the video?
@DIYAlex
@DIYAlex Жыл бұрын
You can find it in several colors here: www.143vinyl.com/vinyl-tools/?partner=403469
@PuddingAndPearl
@PuddingAndPearl 6 ай бұрын
Do you know if anyone makes an engraving tip with a diamond and not steel a carbide ? Thanks
@DIYAlex
@DIYAlex 6 ай бұрын
I would be very surprised if you found this tool. I haven’t heard of anything like that.
@Paperinparadise
@Paperinparadise Жыл бұрын
How long did that take to engrave?? Thank you!
@DIYAlex
@DIYAlex Жыл бұрын
This design took 20-30 minutes
@123rororose
@123rororose Жыл бұрын
U can still do this on the marker though right
@DIYAlex
@DIYAlex Жыл бұрын
Yes, the Maker and the Maker 3 can both engrave!
@BklynGrl
@BklynGrl Жыл бұрын
​@@DIYAlexCan the exploere 3 engrave?
@isabellerios6856
@isabellerios6856 Жыл бұрын
I bought a engraving tip but it doesn’t reach all the way down to my metal. It makes the cutting motions but doesn’t cut nor touch my metal, please help
@DIYAlex
@DIYAlex Жыл бұрын
Is it a Cricut engraving tool? Are you sure it’s seared all the way down in the holder?
@lesliel9476
@lesliel9476 Жыл бұрын
Hiii ! quick question, I just bought the cricut maker 3 because my cricut maker was not working anymore, I am having trouble with the engraving tool, my cricut maker 3 wont detect it, i already restarted both my laptop and my machine but it wont detect. Is there anything youd recommend ?
@DIYAlex
@DIYAlex Жыл бұрын
I would contact Cricut customer service in case it’s a faulty machine! Especially if your machine is new.
@Lacroix999
@Lacroix999 Жыл бұрын
Could the bracelet engraving alignment have anything to do with the blank being positioned under the line and not actually on it?
@DIYAlex
@DIYAlex Жыл бұрын
That could be it!
@Lacroix999
@Lacroix999 Жыл бұрын
@@DIYAlex is the blank supposed to be placed ON the line or right underneath it? I’m so new to all of this and just learning!
@ramlarex7697
@ramlarex7697 Ай бұрын
Can you make it in another color?
@DIYAlex
@DIYAlex Ай бұрын
These are just lines in the acrylic, so I don't think that you could change the color.
@pattishelton3169
@pattishelton3169 10 ай бұрын
Cool
@krystalhooper1943
@krystalhooper1943 7 ай бұрын
Can you show with moulds with different weights.for the earrings not just engrave.
@DIYAlex
@DIYAlex 6 ай бұрын
I’m not sure what you mean since I didn’t use earrings in this video.
@aagg3311
@aagg3311 Жыл бұрын
Hello! The Cricut machine I have is the Explore Air 2. Do you think/know if I'll be able to do those projects using my machine?-Thanks
@DIYAlex
@DIYAlex Жыл бұрын
Yes you can! here's a tutorial: kzbin.info/www/bejne/gJKok6aDetCUmqs
@nisharblogs3s
@nisharblogs3s Жыл бұрын
cn i use this engraving tip with cricut explore 3
@DIYAlex
@DIYAlex 10 ай бұрын
No it's not compatible.
@amaribadass
@amaribadass Жыл бұрын
❤❤❤❤
@cynthiacaballespapangelis1792
@cynthiacaballespapangelis1792 Жыл бұрын
Hello Alex, thank you for the video...I am about to get Cricut Maker 3, is there a beginner video on how to cut cake toppers (ie greetings and names)?, please kindly....many thank you so much!
@DIYAlex
@DIYAlex Жыл бұрын
Sure! Here’s a tutorial: kzbin.info/www/bejne/pnO5iqptd9x7oLM
@KarinaMalpica-i3o
@KarinaMalpica-i3o 10 ай бұрын
Awesome!! Another one for the list!
@DoreenLester
@DoreenLester 11 ай бұрын
Did you figure out how to center the type on the bracelet?
@DIYAlex
@DIYAlex 11 ай бұрын
I show you how in the video :)
@cherylgoguen2343
@cherylgoguen2343 Жыл бұрын
I am having a problem getting the switch from one to another.
@DIYAlex
@DIYAlex Жыл бұрын
What are you having trouble switching?
@krystalhooper1943
@krystalhooper1943 6 ай бұрын
That was my way of asking you to make one.
@pinknailsonlyy
@pinknailsonlyy Жыл бұрын
As expensive as this thing is all of these tools should be included.
@DIYAlex
@DIYAlex Жыл бұрын
Unfortunately that’s up to Cricut, not to me!
@pinknailsonlyy
@pinknailsonlyy Жыл бұрын
@@DIYAlex For sure. I didn’t think it was up to you, just making an observation seeing that there’s a tool for everything 🤗
@sherrielund-wd1if
@sherrielund-wd1if Жыл бұрын
@faizalazmi1080
@faizalazmi1080 6 ай бұрын
We need to subscribe after 1 month using free full access?
@DIYAlex
@DIYAlex 5 ай бұрын
Sorry I’m not sure what you mean. Are you asking about Cricut Access? That’s always optional!
@feestuart2499
@feestuart2499 Жыл бұрын
Hi Alex another youtuber had their engrave centered on the 6 inch cross hair in the middle of the mat and also 6 x 6 (in the middle) of design space. Hope this helps.
@DIYAlex
@DIYAlex Жыл бұрын
Thanks for the suggestion!
@projektdenkbar8659
@projektdenkbar8659 Жыл бұрын
Gottes Reichsten Segen für dich und deine Familie 🙏🙏🙏
@خبيشربيشبننهشلبنكعلان-ب7غ
@خبيشربيشبننهشلبنكعلان-ب7غ 9 ай бұрын
شكراً😂
@cynthiaallen4926
@cynthiaallen4926 5 ай бұрын
You go a little fast, but love your info.
@sarahharrop4466
@sarahharrop4466 5 ай бұрын
Go into KZbin settings you can adjust playback speed up or down xx
@lance4862
@lance4862 5 ай бұрын
Helpful video if you can ignore the religous stuff.
@cherylgoguen2343
@cherylgoguen2343 Жыл бұрын
I got that tool holder
@DIYAlex
@DIYAlex Жыл бұрын
I love it!
@JudyandRico
@JudyandRico 5 ай бұрын
Can you be my friend?
@mariacoria4276
@mariacoria4276 Жыл бұрын
Here’s an idea maybe tell your viewers before the video starts that in order to engrave with the maker 3 you will need a special tool. Cause that was 15 minutes of my life wasted
@DIYAlex
@DIYAlex Жыл бұрын
The title of this video is "How to engrave Acrylic and Metal with the Cricut Maker 3 Engraving tool", so I'm not sure how you missed that.
@JudyandRico
@JudyandRico 5 ай бұрын
U are my biggest fan ❤❤
@baileetraver2730
@baileetraver2730 Жыл бұрын
Can you engrave both sides of the bracelet?
@DIYAlex
@DIYAlex Жыл бұрын
Yes
Cricut Hacks You MUST Know! 😱 | 7 Cricut Hacks Tricks and Tips
12:15
Tooling Leather with Your Cricut
27:06
CleverSomeday
Рет қаралды 378 М.
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
How To Engrave Acrylic Ornaments With Your Cricut Maker 🎄
14:15
Creative Fabrica
Рет қаралды 10 М.
HOW TO ENGRAVE DOG TAGS WITH THE CRICUT MAKER + BEGINNER FRIENDLY TUTORIAL
9:01
Kayla's Cricut Creations
Рет қаралды 15 М.
How to cut Greetings Cards on your Cricut
17:00
Rabia Khans
Рет қаралды 1,4 М.
How to Emboss and Deboss with Your Cricut Maker
9:59
Kelly Rossouw
Рет қаралды 468 М.
20 Cricut Projects GUARANTEED to Make You Money!
21:29
Makers Gonna Learn
Рет қаралды 125 М.
BET YA DIDN’T KNOW YOUR CRICUT COULD DO THIS 🧐
14:47
Makers Gonna Learn
Рет қаралды 254 М.
Better Engraving with the Cricut Explore
15:11
CleverSomeday
Рет қаралды 50 М.
How to Engrave Acrylic with the Cricut Maker
10:10
Angie Holden
Рет қаралды 183 М.
FINALLY I got what I wanted - CriCut Maker 3
17:02
ShortCircuit
Рет қаралды 1,7 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН