*NICE!* Thanks for going step by step. Love the offset side!
@LSEngraving Жыл бұрын
the offset is now my favorite!!
@Anthony-cz2it Жыл бұрын
Wonderful video!
@LSEngraving Жыл бұрын
Thank you very much!
@MakrTheory Жыл бұрын
Great video. The mini big gulp is what I use as well. Big enough draw in a lot of fumes, but just small enough to fit under the arm of the tower for most of my lenses.
@LSEngraving Жыл бұрын
Thanks for sharing
@jimmccall4599 Жыл бұрын
still trying to get the cylinder correction down this video is going to help a bunch, thanks patrick
@LSEngraving Жыл бұрын
you are welcome, sir!
@davidelder5399 Жыл бұрын
Great video. Thanks for sharing the process
@LSEngraving Жыл бұрын
Thanks for watching!
@geniusesunleashed2562 Жыл бұрын
Great video. Thanks for sharing!!
@LSEngraving Жыл бұрын
You bet!
@karlomatuguinas9673 Жыл бұрын
Nice vid! Getting same c02 galvo with 20mm scan head and 6x beam expander ...
@LSEngraving Жыл бұрын
awesome!!
@wizard1963uk Жыл бұрын
Thank you
@LSEngraving Жыл бұрын
You're welcome
@BeardedBuildsCo Жыл бұрын
Great video! Thank you! I am curious why you decided to go with a six X beam expander rather than going up to a 20 X beam expander. What I am hearing from everyone is that for the best quality do you want a 20 X beam expander. What are your thoughts?
@LSEngraving Жыл бұрын
6x 2mm= 12mm beam entering the galvo head. i am going to try an 8x and 10x at some point with the 20mm head. with a 20x you would need a 40mm head which would be huge (don't know if the make them??) . 30watt, 175mm lens and 6x expander is what i decided since tumblers and cylinder correction would be the primary use.
@Kenandlizabeehaven Жыл бұрын
Have you tried burning pictures into greenware pottery
@LSEngraving Жыл бұрын
no, but that sounds like a great video topic!
@rdcole11 Жыл бұрын
Like the video. Learned a lot. You mention a cleaner that you used. What's the name of it? I have been looking for something that works well.
@LSEngraving Жыл бұрын
enduramark Blu. its good stuff!
@rdcole11 Жыл бұрын
Thanks.
@Tankwiper Жыл бұрын
Damn. 70 mm wide. With gantry CO2, there's only enough focal depth to engrave 40 mm wide image.
@LSEngraving Жыл бұрын
are you using a 4in lens on the gantry? i have settings to go 88mm wide on a 100mm bottle now!
@Meowloki19 ай бұрын
Hey brother I saw I. A video you had a multi rotary tumbler disk. I cannot find that. Do you have the link?
@LSEngraving9 ай бұрын
i used the acrylic jigs that i make and sell with a 3d printed tumbler vise. My Remix: www.printables.com/model/445954-2-vise-base-for-light-source-engravings-rotary-tab
@lizardfreakboy8 ай бұрын
I have a JPT 50 wall fiber and a 300mm lens would that be a good combo for doing these also ?
@LSEngraving7 ай бұрын
absolutely! 300mm lens on a fiber is my preferred for tumblers and a 0.1 line space
@lizardfreakboy7 ай бұрын
I have tried a few and I really messed them up good. I guess I just didn't have the measurement right. I think your video will help me get it right next time.
@plexilaska3450 Жыл бұрын
hi what's beam expander 6x? I don't understand :(
@LSEngraving Жыл бұрын
for a co2 galvo laser you have to make the beam bigger for the f theta lens to shrink it back down to proper size.