I have said it before, I love you keep all flaws in the videos. It keeps us all in reality check, which is a safe zone for folks like me who have their share of whoopsies. Also, you are right. The newbies are all too often taken for granted and shouldn't be overlooked. Thank you for keeping all new artists in mind. You are too genuine.
@michelleruiz43863 жыл бұрын
I put shelf liner on the to skewer sticks and A little bit of painters tape or electrical tape it was able to keep the epoxy from sticking onto the stick or the pencil.
@jenreeves76843 жыл бұрын
I have not ever seen anything like this. I really enjoyed the process.
@sharaine203 жыл бұрын
Thanks so much for the silhouette tutorial. I have a silhouette and didn’t know how to join the letters like that. I find most tumbler makers have the cricut and show those tutorials. I love your videos. Thanks for sharing your knowledge.
@joycewoods109Ай бұрын
I'm going to try it. I'm new to resin but I thought pens would be a good project. Thank you for the step by step and sharing mistakes.
@tiffanivalles72533 жыл бұрын
Soo Cute!!! I wish I was able to do something like this. I'm still a NEWBIE, I don't know all the lingo/technics yet so thank you for being so detailed. Newcomers like me appreciate it.
@courtneygarrison45033 жыл бұрын
Love the video thank you. What I love even more is the knob you put on your UV light. BRILLANT IDEA!!! thank you. ♥
@jenniferrudow3895 Жыл бұрын
Thank you so much for your video😊 This was very helpful. Extremely informative. Your pens were very beautiful ❤️
@s_shaddows.49392 жыл бұрын
I'm new to this so I'm happy you do for everyone. Also I kinda like the name being on the bottom of the pen!
@EmilyMineDesigns3 жыл бұрын
Instead of sticking the pencil inside the pvc pipe, tape the pencil to the pvc. That way you don’t worry about leveling issues because of the sag 😊
@Franseeeen2 жыл бұрын
How do you tape it? 🤗
@EmilyMineDesigns2 жыл бұрын
@@Franseeeen I just use electrical tape and tape about an inch to the side of the pvc pipe.
@ebonijohnson57699 ай бұрын
Thank you explaining every step of the way I appreciate it!
@TheMsjoannalynn3 жыл бұрын
You can also make your own weeding pens with a sewing needle and a mechanical/led pencil.
@ThePurpleStitch3 жыл бұрын
That’s a great idea!!
@TheMsjoannalynn3 жыл бұрын
@@ThePurpleStitch :)
@TheMsjoannalynn3 жыл бұрын
@@ThePurpleStitch Also how do you keep the epoxy from getting inside the pen i made a few and the clicky part gets stuck..
@ThePurpleStitch3 жыл бұрын
I try to be extra cautious about getting epoxy over the edges.
@cherlarocque1183 жыл бұрын
Thank you for the tutorial. I'm just starting to make glitter pens, too. I love your pen.
@bettyboop78554 ай бұрын
I appreciate the step by step. Thank you!
@stacynation12683 жыл бұрын
Adding to my list of things to try. Your videos are so helpful.
@peggyhenrichs92003 жыл бұрын
Love that purple/blue glitter!!
@ThePurpleStitch3 жыл бұрын
Me too! Masquerade is one of my favorite chunky mixes, I looove this fine version!
@brittt96403 жыл бұрын
Doohickey is a highly technical term! This is a great idea, thank you!
@ThePurpleStitch3 жыл бұрын
🤣🤣
@FitnessGirl723 жыл бұрын
Great job. I appreciate you explaining each steps and the terms you used.
@annagodfrey46893 жыл бұрын
omg I had no idea you could do that in Silhouette!!! You just saved my sanity 😂. Gorgeous pens. Thank you for sharing.
@gentleladydi3 жыл бұрын
Thank you for explaining how to do the letters, I learned something new from you today. I can’t wait to try the new things I have learned from here.
@meaganstacy14873 жыл бұрын
Thank you for the great, quick tutorial! I have been doing cups for a long time and never thought of doin these until just now!
@nieto12273 жыл бұрын
Thank you for showing how to put the vinyl part since yes everyone skips it love it
@samanthamaikoetter19893 жыл бұрын
Yours are so perfect 🥺. I’m still trying to get my epoxy to be even and the ends to look like that! Ive been through so many pens 😒
@sedirasanders48533 жыл бұрын
Love the knob on the UV lamp🤩
@ThePurpleStitch3 жыл бұрын
🤣 I was tired of having to hold it so awkwardly!
@GlitterSparkleJacque3 жыл бұрын
Those pens are designed to pop air bubbles in large vinyl projects but are exceptionally nice for tiny details!
@MzHolliWudKitti3 жыл бұрын
What are you referring to? I watched the video twice...🤔🤔💟💟💟
@JudiChristopher3 жыл бұрын
WOW!!! Absolutely Excellent Video!!! Great Teacher... Beautiful work.
@sylviakelly49433 жыл бұрын
Thank you Jess, I appreciate you showing all of the steps. Love your work. 😍😍😍
@calissaobviouslycannotdeci74193 жыл бұрын
Maleficent is one of my favorite glitters! IT is beautiful. I have nt see this idea until I saw you do it. I LoVE this! Thanks sweetness for the video! XOXO
@kimberlyford80393 жыл бұрын
Simply beautiful. I'm thinking I have to try this one! Thank you for sharing.
@handmadechiccrafts34633 жыл бұрын
Very unique process. I just subscribed to your channel! I am definitely making this pens❤️
@Oonagh723 жыл бұрын
You literally just solve a problem I’ve had for like 10 years! Thanks!
@ThePurpleStitch3 жыл бұрын
Really!? Yay!!
@EJ-kl9ls3 жыл бұрын
Thank you for sharing your process. I am already planning Christmas gifts for my girlfriends... Hell, for all my friends and family. Such a great gift!
@ThePurpleStitch3 жыл бұрын
Yes! I’m going to make one for my coworkers when I get caught up on all of my orders!
@LanaClarkLC3 жыл бұрын
I saw a girl on TT that made these glitter pens and i was wondering if you could do a big circle of them?
@ThePurpleStitch3 жыл бұрын
I have an attachment that holds 21! I love this thing and it lets me crank them out faster. 😁
@tinahaynes1753 жыл бұрын
I use those pens, they write amazing and last forever! Thanks for another great tutorial! I just subbed!
@normcopping50302 жыл бұрын
Nice tutorial. Questions. Where can I purchase names pre-printed on a page so I can attach to pens.? And, what exact brand of epoxy do you use. Are classes available in So. California?
@asmith77003 жыл бұрын
Thanks for your up close pics of the process
@Faithnhustle3 жыл бұрын
How cute!!! I’m a planner girl and looove pretty pens. This is def on my to do list
@tanishawassil94942 жыл бұрын
Love this.. thank you just curious why did you spray with clear?
@ThePurpleStitch2 жыл бұрын
I like a clear coat to help prevent the vinyl lifting, plus helps prevent any oils from where I touched from repelling epoxy.
@hdb808 ай бұрын
CUUUUUUTTTTTTEEEEE intro to this video!
@ForBidNChocolate3 жыл бұрын
Thank you for your tutorial! What type of spray paint would you recommend please?
@ThePurpleStitch3 жыл бұрын
I like Rustoleum 2x. But some prefer Krylon.
@raynechantel27383 жыл бұрын
thanks for showing the Cricut stuff I have been wanting one but it seems like so much information - I just haven't done it yet.
@tryalsryder3 жыл бұрын
Great video Jess. I do have a question...do these really need to go on a turner? I know you can do cups using the hang method and I was wondering if it would work with the pens.
@ThePurpleStitch3 жыл бұрын
I’d put money that you could totally hang method but might need a couple extra layers to get the smooth.
@cherylchaney92203 жыл бұрын
Love your videos and your voice is so calming! My pens came today and I can’t wait to try them!
@ThePurpleStitch3 жыл бұрын
🥰🥰 you’re too sweet!! They are definitely a hit & I hope you enjoy making them!!! 🥰🥰
@paxtonprojects3 жыл бұрын
Wow! So my thought about the name would be... what about a white waterside?
@ThePurpleStitch3 жыл бұрын
Your options are wide open, go for it!! 🥰 I almost used a new printed vinyl but stick with white to pop. I’d love to hear back if you try something outside the box!
@saracruz30262 жыл бұрын
Beautiful. I just started making pens. Do you mind sharing what brand of epoxy are you using. TIA
@ThePurpleStitch2 жыл бұрын
I use several kinds nowadays. I love KS resin liquidy split and Mr NOLAS speed dry if I’m trying to get a lot done. I use KS Liquid art for more working time. And EnvirotexLite for most of my keychains.
@treasureheart12573 жыл бұрын
Awesome! Love the glitters you used
@amykincaid94123 жыл бұрын
Any tips on how to get the pen off of the pencil? I apparently epoxied it to the pencil 🤦🏼♀️
@ThePurpleStitch3 жыл бұрын
Oh no!! I have seen others post that they pushed it off with a dowel through the other side. I haven’t had it happen yet so can’t speak from experience. 😩
@tamelamertens68052 жыл бұрын
Love the video . Thank you for doing it . One question I don’t have a machine to make stickers so can I buy stickers to use and if yes what size should I use . Also I don’t have a lite so do I just let it sit for awhile .Thank you for your time
@ThePurpleStitch2 жыл бұрын
You can definitely use store bought stickers and vinyl! My fonts are about 1/2” high and I think max length is 5.5”. Actual circumference is about an inch but I’ve never actually measured it.
@tamelamertens68052 жыл бұрын
@@ThePurpleStitch thank you for letting me know . As for the light since I don’t have one is just letting it sit for hours ok
@catherinemarie19913 жыл бұрын
How did you get the pencil out of the pen so easily? Both times I tried the pencil broke because it was stuck on with epoxy drips
@ThePurpleStitch3 жыл бұрын
So far I haven’t had it happen. I’m suuuuuper cautious around the edges.
@chocolaterhunder3 жыл бұрын
I wonder if you can you a syrfoam and you can put several inside the foam. I don’t know if it would work
@ThePurpleStitch3 жыл бұрын
Possibly! I’ve actually rigged up one of the inserts with the holes in it and I can turn 7 at a time.
@jubileesisters97113 жыл бұрын
Would you mind helping me with a Sil Studio question? I really like that you have it set up to fill your font in white. When I change my setting to fill instead of outline, it defaults to an ugly blue no matter what I do. Where is the setting to change the default for the font color? Thanks for your help and for a great tutorial.
@ThePurpleStitch3 жыл бұрын
🥰 It should be in the left corner. Click the color and a drop down should appear.
@melissayirin9473 жыл бұрын
I would love to have one of these pens. I love them both. Great job
@JessicaBRios3 жыл бұрын
Wow they came out amazing. I’m starting to do the epoxy pens but people has been asking me for the refill ink. Do you know where to get them from that specific brand?
@ThePurpleStitch2 жыл бұрын
Yes! Amazon has them from Pent and they write the same. You can search 5.5” refill and you’ll get a few options. You’ll need to keep the spring from the original.
@rebeccapeyton80373 жыл бұрын
After your first epoxy and glitter applied, how long do you let it sit before applying the 2nd coat of epoxy?
@darnleysmith68453 жыл бұрын
? Do you think the hang method would work for pens also? New to all of this Epoxy but I have been looking for a way to refill pens since I bought some molds & Epoxy.
@ThePurpleStitch3 жыл бұрын
It should be fine, just a little more time consuming. 😊
@nailtech4years3 жыл бұрын
Do you have to use the paper mate pen? What about a Bic that you don’t have to cut the clip off. Just wondering. Thank you for the video.
@ThePurpleStitch3 жыл бұрын
I imagine you could use most styles, some might be trickier than others. 😊
@lauraprice52613 жыл бұрын
Nice video thank you for sharing your talent 😊
@dswatik993 жыл бұрын
could you achieve this with out using a tumbler turner?
@jessicaislas17903 жыл бұрын
Disclaimer I am just getting started with cricut. What material did you use to cut your name into? Sorry if that seems like a dumb question. I am just trying to get familiar with the transfer tape and other material.
@ThePurpleStitch3 жыл бұрын
Just Orcal 651 glossy from Michaels. 😊
@kassaphrass953 жыл бұрын
For the turner is it a different turner or another attachment? Also is there a way to make these more boyish.
@stephaniehowell89813 жыл бұрын
What is the shop light you were mentioning? I'm new to all this so I have nothing and know nothing.
@ThePurpleStitch3 жыл бұрын
Just a shop light like from Home Depot. There are a couple sizes to choose from.
@pamelalopez4342 Жыл бұрын
i just tried this an i had 4 pens an only could save 2 the epoxy gets inside an sticks the pencil inside an will not budge is there anything u can put on the end so this wont happen again?
@kristiecurry73173 жыл бұрын
Can you paint on acrylic paint instead of spray painting a base coat?
@eli.esther3 жыл бұрын
@thepurplestitch do we need a turner, is it crucial to make these pens? I've never msde tumblers and right now have no interest but I found your video when looking into these pens. Thanks
@ThePurpleStitch3 жыл бұрын
Lots of folks use epoxy without a turner. The key is typically thin layers and rotating by hand when needed.
@eli.esther3 жыл бұрын
@@ThePurpleStitch thank you for your reply
@LisaWyattArtMyBestMedicine3 жыл бұрын
Another wonderful project to go on "my list" lol
@kbest16393 жыл бұрын
What is your favorite black black? One that doesn’t throw any color.
@ThePurpleStitch3 жыл бұрын
Skellington, but I have to add white wedding or it looks like tar. 🤣
@kbest16393 жыл бұрын
Thanks! I will try that one! Out of the 10 black glitters I’ve purchased I always get ones that throw color, and most throw green! 😩
@karenanderson81163 жыл бұрын
I love your tutorial. Can you give a link to the heat light you used from Amazon to cure the UV Resin?
@ThePurpleStitch3 жыл бұрын
I have this one: amzn.to/2Y1JdAG
@karenanderson13263 жыл бұрын
@@ThePurpleStitch Thank you so much. Look forward to more of your tutorials!!
@stephhernandez713 жыл бұрын
I love this! I'm always looking for new ways to use resin. I dont do tumblers so I dont have a spinner but is a spinner required to make these pens? Can I make them without them?
@ThePurpleStitch3 жыл бұрын
I’m sure they could be done with the hang method!
@peaznat3 жыл бұрын
Not sure why you add the turner. Doesn’t seem necessary. Is it?
@ThePurpleStitch3 жыл бұрын
@@peaznat not for super thin layers. But definitely if you’re doing any amount that gravity won’t like. If epoxy is too thick, it will drip off.
@MzHolliWudKitti3 жыл бұрын
I'm watching many videos on these pens. Thank U for sharing. Just one question, why did u out ur name upside down?☺️💟💟💟
@ThePurpleStitch3 жыл бұрын
😁 I like my names to start at the top. Of all the orders I have made, No one has asked for the other way. It’s all personal preference. Also, personally, since I work in a place that people watch me write I like my name pointing to them.
@sarahtaye3 жыл бұрын
Can you please help with the cutting settings for the cameo? Did you just have it on vinyl?
@ThePurpleStitch3 жыл бұрын
I used the glossy vinyl setting with default pressure but dialed the speed down to 4.
@sarahtaye3 жыл бұрын
@@ThePurpleStitch thank you
@livelifebeautifullysuenelson2 жыл бұрын
I can't seem to hide the "seams" of the pen. Any idea why?
@Adventuresofagingermom3 жыл бұрын
Now I need to try this
@CrystalWilliams-rt3zm3 жыл бұрын
What type of pens are you using to make these amazing pens out of?
@ThePurpleStitch3 жыл бұрын
Ink joy gel pens 🙂
@josettevance65173 жыл бұрын
Could I use bright tone instead of epoxy?
@ThePurpleStitch3 жыл бұрын
I thiiiiink so…..but I have zero experience with Brite Tone.
@axidentalcreations80863 жыл бұрын
Thank you again, Jess. I enjoy your videos.
@kathys4843 жыл бұрын
Can you use acrylic brush on paint instead of spray paint?
@ThePurpleStitch3 жыл бұрын
I would think so! Some people use that for their tumblers when they can’t spray paint.
@tonyadawson54823 жыл бұрын
My pens are lumpy! Am I using too much epoxy? Any tricks to avoid lumps?
@ThePurpleStitch3 жыл бұрын
Possibly, or if it doesn’t turn long enough it can have little mini drips from gravity.
@chocounts95743 жыл бұрын
oh my... i just had a though on selling these to my co workers. they love love love pens.. and they love stealing each others. so it think this is great... thank you for sharing
@ThePurpleStitch3 жыл бұрын
Yes!! I know mine are gonna be jelly! 😆😆
@JudiChristopher3 жыл бұрын
I need to do this ... to make money for school for kids.. How much could you sell these for? I have no idea how much these are worth.
@HelloImAru3 жыл бұрын
I feel like I need to revamp some of my Inkjoy pens that I have. 😍
@ThePurpleStitch3 жыл бұрын
Do it!! 😆
@brittanymiller33963 жыл бұрын
What kind of epoxy would you need for these? Also where can you get a turner like that?
@ThePurpleStitch3 жыл бұрын
There no specific brand you need, just whatever your favorite is. I use KSRESIN liquidy split for almost everything. This is a Globeus brand off amazon but there are lots to choose from. 😊
@donnamay11503 жыл бұрын
So the ‘comfort grip’ part didn’t give you any troubles?
@ThePurpleStitch3 жыл бұрын
Doesn’t seem to. It spray paints well and didn’t seem to repel epoxy when bare.
@reganchristen30483 жыл бұрын
What do you do if the pen/tumbler is lumpy?
@ThePurpleStitch3 жыл бұрын
I have sanded down a few. I’ve also had to toss a few that couldn’t be salvaged.
@jennifercastillo22583 жыл бұрын
Wow amazing! How much would you charge for one of these pens? With name vinyl.?
@ThePurpleStitch3 жыл бұрын
They are $8 each plus $4 shipping. You can message me at facebook.com/thepurplestitch if you’d like. 😊
@dawncoppock51803 жыл бұрын
Do you only use the fine glitter on these, I’ve used the chunky but its hard to sand them down smooth.
@ThePurpleStitch3 жыл бұрын
The trick for the chunky is to apply twice as much epoxy when you’re glittering. It allows it to settle better. 😊
@tabithaprice37083 жыл бұрын
I'm going to try this! It's beautiful.
@empcreations203 жыл бұрын
What happens when the ink runs out? Do they sell refills or are you just buying another regular one to change it out? (The pens aren't cheap so just wondering about the investment after.)
@ThePurpleStitch3 жыл бұрын
I don’t believe there are any refills available for this design. So the refill would cost the same as a new pen, but without the work of making a new epoxied one.
@JudiChristopher3 жыл бұрын
@@ThePurpleStitch Just take the intrills from another plain pen... switch it out!
@stephanieearle35953 жыл бұрын
How much would you sell these pens for? I do tumblers and I'm thinking about doing these pens too
@ThePurpleStitch2 жыл бұрын
Mine range from $8-10. I’ve seen some amazing work go for $15 a pen from some shops.
@10martin203 жыл бұрын
NEED ADVICE! I must have accidentally gotten epoxy on the dowel I used in the pen. My pen is done but the dowel won’t come out. Any advice or is it a lost cause??
@ThePurpleStitch3 жыл бұрын
You can try heating the area and maybe cutting it with an exacto. The dowel is probably a goner but if you’re super careful you might be able to save the pen. 😩 good luck!!!
@michellemunoz710233 жыл бұрын
Hi! This is amazing looks awesome! Thanks for this great video. What size did you have to do the name? Thanks in advance 😊
@ThePurpleStitch3 жыл бұрын
I did about a half inch.
@whitfirstladyrobinson78643 жыл бұрын
I just did this but two of my pencils got stuck lol maybe too much epoxy lol
@terirougeou67293 жыл бұрын
In one of these comments someone said they wrapped electrical tape or painters tape around the end of their pencil. that helped with the pen not sticking to the pencil.
@deeannet3 жыл бұрын
How do you know the size of the decal for the width and length of this pen? Want to try but have not done b4
@ThePurpleStitch3 жыл бұрын
About a half inch height should be pretty perfect. And no longer than 4.5 inches long. 😊
@kristyPoyntz3 жыл бұрын
Super fun! Thanks for the video..it was a great tutorial
@trentboudreaux90502 жыл бұрын
How can I order a pen in that pretty teal color?!
@ThePurpleStitch2 жыл бұрын
If you’d like to order a pen you can message me at facebook.com/thepurplestitch. Or, if you’re just needing the glitter name it is Masquerade Fine from www.FransGlitterAndMore.com. ☺️
@usherl2503 жыл бұрын
Those are adorable, love it, thanks for sharing
@AfroBelle823 жыл бұрын
Awesome tutorial. What font and font size did you use?
@ThePurpleStitch3 жыл бұрын
Definitely half inch for size, the rest I can’t remember anything except Loki Cola. 😆 I’ll have to look back and see.
@AfroBelle823 жыл бұрын
Thank you! 😁
@nonimade50673 жыл бұрын
What do you attach the pen to for rotating, I haven’t seen a video where someone explains what they use for that
@ThePurpleStitch3 жыл бұрын
This is one a pencil. I explained how I had seen someone post their hack. Then I used electrical tape to make the end fit inside the pvc. I now have a little more complex set up to turn more at a time.
@aliciapetitto53393 жыл бұрын
How did you put the knob on the dryer?
@BreMercantety3 жыл бұрын
How long do you let it cure for between layers? Also how long until completely cure?
@ThePurpleStitch3 жыл бұрын
The completely cure answer is depending on your brand of epoxy. I wait as little as 1.5-2 hours when I use liquidy split and have my shop light nearby while curing.
@whitfirstladyrobinson78643 жыл бұрын
Have you had issue with them not clicking properly?
@ThePurpleStitch3 жыл бұрын
Not yet, I use mine all day at work.
@aliegrounds74823 жыл бұрын
This may have already been asked but what is the width and height of the decal?☺️
@ThePurpleStitch3 жыл бұрын
I go for about a half inch height. Length will depend on the name. 😁