How to Finish Off Traditional Loom Work and Add a Slider Clasp

[@momsphonephone8592]

I know this is an old video but I am so glad it came up on my feed. I have read books and watched videos and they have not shown how to finish off the beads. It just goes from the finished pattern still on the loom to resting gracefully on a wrist. That is a big step there that I could not make look nice, pretty or finished looking. Now after twentyish years I am going to dig my loom and beads out of the basement and make something for my children. Thanks again. (hearts)

[@beadaholique]

Wonderful! I am so glad it was helpful!

[@mulvenealonso1758]

At last! A technique that's simple, clean, and effective. What I've been scouring the Internet to find. Thank you deeply. So glad this is still posted years later.

[@becsuzjacsmom]

Thank you so much. This is so much easier and neater than what I was doing before

[@flannerycinnamonh2858]

Thank you so much! Today I had to disassemble a bracelet I’ve been working on for days because I didn’t know how to finish the end, but now I won’t repeat this mistake:D

[@jenniferm.4391]

I’m so happy I found your page!! I’ve always wondered how this was done. As a newbie, this is going to be extremely helpful.

[@beadaholique]

I'm so glad! Thank you for taking the time to watch)

[@carolking7408]

Yummy 7)

[@tinaday-sloop7258]

I just created my first 2 weave bracelets. Love it much better than any stitch I've done so far. I had a very dear friend who wanted an indian style beaded necklace at that time I didn't know how to however I told her I would find out how. I learned a little too late she passed away on me a year ago and everytime I look at the next pattern I would like to try or draw up my own design I think of her and it brings a tear to my eyes, she was more like a sister I would have loved to have had. Debbie you are always with me especially when I'm weaving. Love You Lady. I feel you with me when I am running my thread to and fro. Thank you for taking your time to create this video I never would have known how to finish my work w/o you, I would have held them in my need to finish box/drawer.

[@beadaholique]

Thank you for sharing your story with us, very special indeed and I am sorry for your loss. I am glad you have enjoyed learning this technique and that it has such a special meaning. If you ever get stuck or have questions, please feel free to reach out.

[@fuzzylogics139]

I just bought these slide-ends and other end pieces too.. and only when I got them realized I didn’t know how to use them. 😳 Thank you lady ❤️

[@beadaholique]

Glad you found the perfect video for you then! Happy we could help!

[@summer_poems]

I am quite the newbie and so glad that I found this page!!! Thank you for such clear and patient instructions!!

[@TheMaddestHatter234]

Thank you so much! I’ve been doing mostly bead weaving these days, but I went ahead and dug my bead loom out of storage on a whim and this is super helpful!

[@beadaholique]

Taking an old tool of storage and figuring new ways to use it is such a good feel isn't it? Glad we could help!

[@sillygoofy1893]

this was a very helpful tutorial! i’ve been looking at different ways to finish off a bead loom piece, but this is definitely the best way i’ve found! thanks so much!

[@pmgreatorex]

This is exactly what I needed! I love the neat finish of the slider clasp. I also love it that you use one of my most useful tools, the humble toothpick! Thank you!

[@beadaholique]

The toothpick is the best!

[@brandysterzik8683]

Omg!!!Thank you for this amazing tutorial!!I do so many bracelets with my loom then trying to decide how to finish it!!Well I see this method it THE pay off!!THANX!!!

[@aylamakhoul6955]

thank you for the wonderfully clear and easy way to finish the loom project, I love how easy you made it look!

[@KittyMikuVids]

Your tutorials are so easy,I learned how to make beaded bracelets without my first bead loom arriving,and when it came the bracelet was perfect!Thank you so much ❤

[@beadaholique]

You are very welcome!

[@WolfmanHowlz]

I know this video is old, but I actually finished my first bead loom piece today and I had no idea how to finish it! This video was so helpful and clear, thank you very much for posting it!

[@beadaholique]

You are so welcome!

[@Cloudryder9]

Thank you. Learned so many things watching this video that I never thought of.

[@mboudreaux2950]

Thank you. This is a great alternative to the traditional tie off method. I might also add, it would be a good way to use up leftover beads on the very last rows on either side. That way you can save those beads, esp. if you prefer their colour to others, for another project, since they’ll be covered up and glued over anyhow.

[@beadaholique]

Very good idea! I had never thought of that - thank you!

[@dianepeter3625]

Thanks, I just finished my first bracelet and was iffy about how to finish it off with the warp threads. So I'm glad to have a simple way to do that.

[@beadaholique]

Glad to help, we looked far and wide for this method before we found it so we're happy to be able to share it!

[@valeriemiller8111]

Thanks so much for your videos on how to do these kinds of pieces of artwork. They have been very helpful

[@Cerecia61]

Can't thank you enough for showing this. Thank you! Now I can finish off my stuff from the 90s that are just lying around because I didn't know how to do this part :)

[@beadaholique]

We had the same reaction when we found these. The perfect answer to a decades old question.

[@sheilaandblacky]

thank you

[@ThaMCE]

HAHAHA OMG ME TOO!!!

[@katiespence3980]

I have always loved working with beads, thank you for improving my technique. I plan to watch every tutorial. Thanks so much!

[@silvanabordonaro2776]

Grazie sei molto brava e precisa. Finalmente sono riuscita a finire il lavoro. Sei grande😘

[@gardenboots7464]

Such a great tutorial. VERY relaxing to watch. THX :)

[@meromena8184]

Seen videos that shows how to start but never completing..Thank you so much and it so helpful..Do have a question can you use monofilament fishing line?

[@beadaholique]

Hello! I am glad the video was helpful. What can I help you with for your question?

[@meromena8184]

@@beadaholique can you use monofilament fishing line? How to measure wrist to know how many beads to use?

[@irismar8139]

beautiful! thank you so much for showing the easier that is.

[@jannarumeantseva7198]

You tutorials are so benevolents and useful. Thank you!

[@marthamarisolciezagarcia7646]

Muchas gracias por enseñarnos.muy hermoso tu trabajo. Bendiciones.Saluos ❤️🇵🇪

[@جويريةمحمددفعالله-ك9ن]

That is amazing. I tried to burn it once, and the result was a dramatic collapse of my whole work!!!

[@beadaholique]

Oh no! I hope this technique works for you. Please feel free to ask any questions that arise as you are doing it.

[@suzzettecochran7317]

I always wondered how that was done. Thank you so much!!! Very helpful!!

[@beadaholique]

It took us a long time to figure this out and find just the right sort of clasp, glad we could help spread the knowledge 😃

[@kenn1936]

Excellent demo/tutorial - thank you so much.

[@conniebotkin5185]

Thank you so much for your video, I tried it your way, my beads came loose for the first row, and the knots didn't stay, I don't understand what I am doing wrong, I have tried to reinforce the first row by going through them 2 to 3 times, still the same problem when I take them off the loom, any help would definitely be appreciated. I love all the videos and the products you make. Your my hero.

[@beadaholique]

Hi Connie, sorry you're having trouble! What might be helpful is going back through the last two rows. The beads should be secured by the knots you will make with the warp threads. Also, a little dab of glue goes a long way.

[@fungirl809]

I literally hate warps thank you ,you made it so effortless.

[@kathylewis7543]

Lovely! Great job I've been not able to find any of these kits!

[@GospelTruth37059]

I always wanted to know how to do this like you showed us today. Thank you so much!!!!

[@beadaholique]

Glad we could help! Thanks for watching!

[@SapphirePanorama]

Helpful video! What size clasps are used in this project?

[@tvc153]

Great tutorial about tying off the piece

[@beadaholique]

Thanks glad you found it useful!

[@bevdowdy9483]

Thank you for the video. Can you please tell me how do you know which slider clasp to use? And your clasps work with the 11/0 round rocaille seed beads?

[@beadaholique]

This kit will include a 26mm wide clasp. We have these claps available in a few sizes, but we recommend measuring the width of your project to help select the right size clasp. These will work with 11/0 beads. Thanks so much!

[@shereneliscom6736]

Your work is absolutely beautiful !!!

[@beadaholique]

Thanks Sherene!

[@colesuqs]

Idk if you answer questions, but if you do.. ok so I bought a loom that came with beads from Amazon, so I'm using the beads it came with a long with white thread, regular thread, I tried a couple of other things first and so far the thread has worked the best,.. so my question is, mine aren't coming out looking as organized and put together as yours, you can't see my pattern as well as yours, the beads just don't seem to fit as uniformly as yours or ones on Pinterest! I'm not sure what I'm doing wrong? Is it the beads or the thread, or maybe a crappy loom? Any thoughts would be appreciated! ( Also thank you for this video! Very informative!)

[@beadaholique]

Sorry to hear this is happening. In many cases, the issue may simply be that there is not enough tension. Unfortunately, you may need to start over to add more tension as you loom. Please note that too much tension may cause the cord to damage or break. Another issue is that your beads may not be fully uniform. We recommend Toho or Miyuki seed beads for the most uniformity. You can find them here: beadaholique.com/collections/seed-beads We recommend the Beadalon Jewel loom. You can find it here: beadaholique.com/search?type=product&q=jewel+loom

[@colesuqs]

@@beadaholique awesome thank you so much for replying!!!

[@lesliezimmerman9162]

Is it better to knot 2 threads or needle the thread under over the loom threads?

[@beadaholique]

I personally prefer to knot two threads at a time but everyone has a different preference - so I would say experiment and see what you like best.

[@lesliezimmerman9162]

@@beadaholique Thank you for your reply, I have made a few bracelets and waiting on the clasps to be shipped to me. the ones I have made I have just made a regular knot 3 times which I think will be fine

[@marciahenry3721]

Greetings, some time back i did some detailed beaded bracelets, ordered the slider clasps and affixed them. I was very pleased with the results. Sadly after a very short time all the clasps rusted. i was immensely disappointed. Is there a set of clasps that will not rust???

[@beadaholique]

Oh no! I am so sorry to hear this. I am not sure why they rusted for you, that should not have happened. I know you already went to a lot of effort with them, but if you bought them from us, you are welcome to reach out to our customer service team for some help. Their email is: [e-mail] I have been using these clasps for years and have not had any rust on me.

[@beadaholique]

Oh dear! I am sorry to hear that, they should not rust. If you bought them from us, please contact customer service at [e-mail]. The only reason I can think of that rust could possibly happen is if they were exposed to a chemical such as perfume, chlorine, sunscreen, lotions - but even with most of those, with the exception of chlorine, I wouldn't expect them to rust after a short period. Please do reach out to customer service if you purchased them from us.

[@missdjami5759]

très beau bracelet et les finitions sont impeccables...

[@shereneliscom6736]

Im going to have to get some slider clasps for mine, what other ways can you finish your loom work??? Can u make a video of other ways??

[@beadaholique]

Our loom playlist has one or two other ideas for finishing jewel loom pieces like this: kzbin.info/aero/PLdGWVJ-tb1bFe9VgdksRZ7H3MzQiffh5g

[@rosinimohdjuni9742]

Thank you so much. Very helpful tutorial. 🌹

[@michellestevens7382]

Cannot wait to try this technique

[@isabelawhatever5012]

Hi there! Can any of you help me please? How can I finish this bracelet without a clasp? Is there any video teaching an alternative technique? Here in Brazil we kind of strugle with good quality clasps, I thought os finishing with macrame, but honestly I don't know how to even begin. Thank you for sharing so much on your YT channel.

[@beadaholique]

Hi Isabela. The problem to solve will be how will you wear the bracelet without some kind of connector. Those long threads at the end could provide a solution if you can tie them to something or make a clasp of sorts from fabric and add that...you'll want to brainstorm a creative solution along those lines if a metal clasp is out of the question...

[@margaretbush3272]

Thank u for this! I just learned how to loom bead and was stuck at the end of what to do! Is there different size slider clasps or are they all the same size??

[@beadaholique]

Thanks for watching! We are happy to confirm there are different sizes available. You can find them here: beadaholique.com/search?type=product&q=Beadalon+Slide+Connectors%2C+with+Extension+Clasps+for+Multi-Strand+Projects+

[@leonardohernandez541]

Hello, your beads looks so even. The ones I bought from Michaels, some are bigger and others smaller, which make one row longer than others. Where do you buy your beads? Also I kept running out of thread when working with long hat bands. Any advice? Thank you in advance!

[@beadaholique]

Hi Leonardo, the beads we use for these loom projects are Toho 11/0 rounds, they're high quality Japanese seed beads. You can see our selection of them here on our website: beadaholique.com/collections/seed-beads?sort=created-descending&_=pf&pf_v_brand=Toho&pf_t_size=0-Size%3A11%2F0

[@juanitamaxon1786]

Thank you for a very easy Tutorial.....I needed to see how you finished off the ends. Loved the video...was so clear in learning this project.

[@kristibbradshaw]

So pretty.

[@kristina_87]

Awesome. Thanks. It's really helpful ❤

[@emmalyn6167]

I love the loom you made...That is bracelet right, how about for neck and head,I like something for head..can you do it?

[@EmotionalIntegration]

Thank you for the great video ☺️. I am wondering if I could use super glue for the knots? Thank you.

[@beadaholique]

Yes I think super glue would work well for this application

[@ZudeXbox360]

This'll be extraordinarily useful. Though while slightly unfortunate, the spaces between my warp threads and my seed beads (I usually use Size 10s and 11s) are too small, so there's usually deformation near the beginning. However, this'll definitely make my loom pieces much cleaner, even if I just want to do small badges over bracelets

[@Blessingswalaa]

Fantastisch ❤❤❤❤

[@candyflairsprojects6612]

That is beautiful bead work.

[@xcountryrunner9]

Hi, where is the video of tying off the other threads? Thank you

[@beadaholique]

Hello! Here is the video for that: beadaholique.com/products/how-to-tie-off-and-add-more-thread-in-loom-work

[@xcountryrunner9]

@beadaholique thank you!

[@kpac65]

Your tutorials are easy to follow and very helpful. I am trying to loom the warp threads as you recommend but the needle won't fit through the tiny 11/0 beads. I'm afraid I am going to break a bead if I force it. Any suggestions?

[@beadaholique]

You may want to consider a thinner needle. If you are already using a size 11 needle, you could try a thinner needle, such as a size 12, 13 or 15. You can see the needles we have available in the following link: beadaholique.com/collections/jewelry-making-tools?_=pf&pf_t_product_type=0-Product-Type%3ABeading%20Needle&pf_v_brand=BeadSmith Thanks for watching.

[@maryhammond7204]

I'm thinking they come in different sizes to fit different size seed beads.

[@beadaholique]

They can be used with various sized beads. They come in different widths which is nice so that you can pick the right size for your loom project.

[@lisalyons121]

Hi, your videos are so very helpful. I've got some questions. Your beads are so perfect. Can you tell me what they are and what kind of thread you're using. Thank you. I'm a beginner.

[@beadaholique]

Sure thing. For beads we're using Toho 11/0 rounds, you can see the colors we carry here: beadaholique.com/collections/seed-beads?_=pf&pf_t_style=0-Style%3ARound&pf_v_brand=Toho&pf_t_size=0-Size%3A11%2F0 For thread we use Nymo in size D, you can find that from us here: beadaholique.com/collections/nymo?_=pf&pf_t_size=0-Size%3ASize%20D

[@stepmothercity]

I just started loom beading and thought I wanted to avoid buying clasps, but now that I’m at the end I want something easy like this. Btw E600 is a very effective glue, however it’s extremely toxic and should be used outdoors. I’d keep it outside at least until it fully cures and stops emitting so much fumes. Personally I’ll try to find an alternative. My beadwork isn’t museum quality yet anyway. lol

[@karenm9979]

What thread specifically are you using? The problem I'm having is that when I tie the knots They are too big to get into the slider with the bead as well. If I use stronger thread. It's too big and if I use less strength thread, then the bracelet will fray and break would love to know how you would solve this problem. Thanks in advance.

[@beadaholique]

We are using Nymo but Toho One-G is also another good option.beadaholique.com/search?type=product&q=nymo+thread and beadaholique.com/search?type=product&q=one-g I hope this helps

[@kimtrudeau148]

Thank you for sharing.

[@anneatkinson3388]

They look great. What sized beads did you use?

[@beadaholique]

These kits use Toho beads in size 11/0. Here is a link to our 11/0 Toho beads: beadaholique.com/collections/seed-beads?_=pf&pf_t_seed_bead_size=Seed%20Bead%20Size%3A11%2F0&pf_st_availability=true&pf_v_brand=Toho

[@melaniegorduizbarcena1152]

May I know what thread are you using?

[@beadaholique]

We use size D Nymo thread. Here is a link: beadaholique.com/search?type=product&q=NYMO+Nylon+Beading+Thread+Size+D

[@ivonnemartinez4196]

😂Thank you your tutorial is very helpful

[@joycemncube367]

Thank u so much🙌👏👏

[@susanaescobedo1]

This looks so easy here the sliding of the clasp! It's been 30 minutes since I started trying to slide mine and I can't do it.

[@beadaholique]

I'm sorry. Is it getting stuck on something? Please let me know and I will try to help.

[@susanaescobedo1]

@@beadaholique thank you for your reply. I think it’s getting stuck on the knots.

[@leticiagarcia2159]

I do it differently, after I remove the bracelet from the loom, I start pulling the strings from the sides so at the end I end up with a long string that I later will used on a different project.

[@lynncarling4392]

Is there enough room in the tube to use a thicker cord such as micro c-lon with fewer rows and knots?

[@beadaholique]

There may be, but unfortunately I haven't tried it with that cord with them.

[@cjhetle]

I have tried beading many times and I get as far as getting all the beads on the loom but the only needles i find are too fragile to do any of the finishing work. Where do you buy your needles or what kind are they? The ones I have found are super fine, quite flexible and break if you breath too hard. BTW, you do great work, I will watch all of your videos!

[@xcountryrunner9]

What kind of string do you use for the loom beading?

[@beadaholique]

A nylon thread works really well such as One-G or Nymo. We have a good selection here: beadaholique.com/collections/beading-thread-needles?_=pf&pf_t_material=0-Materials%3ANylon

[@xcountryrunner9]

@@beadaholique ok, thank you, I'll check it out. Is it the same type of string for both the looping and the strings that stay straight?

[@doreenjohnson8359]

Can i use this technique of finishing off my piece even though its not going to be a bracelet???

[@beadaholique]

You can use this technique for any loom work project. Thanks for watching!

[@jayantlangalia7166]

How to buy this peg board. Beads weaving board...pls

[@jackhaynes7985]

Thanks very good

[@sevdakavak8293]

Tesekkurler cok ogreti bir vidyo olmus elinize saglik😊

[@autumn8034]

Great video

[@beadaholique]

Thanks!

[@autumn8034]

I would like to male this. Where would i get a loom and the findings ex: thread end pieces. I have so many seed beads would love to make this. Please let me know thanks. Noreen.

[@beadaholique]

Hi Noreen, glad you liked the video! We sell all the supplies on our site, let me give a few links to the loom and the end pieces: beadaholique.com/products/beadalon-jewel-loom-kit-weave-necklaces-bracelets-and-more beadaholique.com/products/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-26x5mm-1-set-gold

[@Luzangelicaolguin]

Excellent technique for finishing the project, I love it 😍

[@denisortiz3622]

Como consigo esas ceradura hermoso

[@Luzangelicaolguin]

@@denisortiz3622 no se de donde escribes, pero en la cajita de information la Sra da los links donde se pueden encontrar. Tambien donde venden material para bisuteria puedes buscar

[@mikalwhatley6226]

So I have a question if I finish a bracelet and don't have slider clasps could I still take my work off the loom and put the clasps on later?

[@beadaholique]

Certainly. Jut as Julie did in this video.

[@VeronicaSandoval-Guzman]

What thread do you use?

[@cerenn35_]

how do i tie them without that metal thingy

[@babgirl41]

Can I use this tieing off method using 100% cotton Friendship thread and curved ribbon crimps !!

[@beadaholique]

Great question. Unfortunately since I have not used those two ingredients together in this technique, I can’t speak to whether or not it will work. Are you trying to loom with the friendship thread and how thick is it? My concern is that it might not go through the beads since you need to do multiple passes. If you want to send more details and maybe pictures to [e-mail], perhaps I can give you some better advice. Thanks!

[@arpitabhattacharya1780]

Where can I get seed beads and other items used in bead loom? I stay in India. Can u help me with any clue?

[@kukalkan]

Exelente video. Muchas gracias. Saludos desde los ídolos Veracruz mexico

[@beadaholique]

De nada! Gracias por visitar nuestro canal!!

[@beckyj5875]

I have dexterity problems in my left hand which makes it hard to tie a knot in the thin thread. Does anyone have any suggestions on what I can do to help me tie them?

[@eshasathiyamoorthy2592]

Thank you so much!!! This is perfect!!

[@beadaholique]

Glad we could share it, this one of our favorite techniques

[@maryfowler3185]

I could really use some help/advice. I want to make my husband a hat band for his cowboy hat. He has a couple already and they seem to be stretchy almost like there is elastic cord in them? Any advice on a size 11 bead where to get some kind of cord like that that hopefully wont break? Thank you!!

[@louisaentsminger3751]

Size 11 beads are pretty much the norm. Granted there are a lot of other sizes but when it come to using seed beads, size 11 is the most common. You can use stretchy cord but I don't use it bc I don't trust that it won't break. For attaching to the loom I use strong all-purpose sewing thread like dual duty plus in either tan or ivory & then .006 in or 0.15 mm beadalon wildfire thermally bonded bead weaving thread for the weaving itself. The dual duty is around $2 & the wildfire thread is about $4 both at walmart. As far as getting it to fit your hubby's hat, measure the circumference of the base of his hat & either do it exactly that length or use the leather she showed in another video to attach to each end & the strips to tie it around his hat so it's easy to get on & off of it & then he'll have some small leather tassels on it too. Anyway, hope this helps.

[@MsPopo81]

Do you sell the stand?

[@maryquilter4154]

Thank you very much for this tutorial!

[@sarahclough4942]

Hi I’m new to making jewellery and I’m keen to learn loom work!! What are the end findings called and where can I purchase them please. Sarah from Newmarket Suffolk uk 🇬🇧

[@beadaholique]

Those end findings are called slide connectors, you can see the model we used in gold here: beadaholique.com/products/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-26x5mm-1-set-gold And in silver here: beadaholique.com/products/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-26x5mm-1-set-silver

[@rosaliecadahing3307]

What is the lenght of your end cap?

[@beadaholique]

It is the 26x5mm clasp. Here is a link: beadaholique.com/search?type=product&q=26x5mm

[@venymae]

could you do a tutorial of how to remove a bracelet like this and simple connect the two end instead of adding a clasp? I cannot find one, and have just finished reweaving a bracelet of mine that had no clasp (like it had no start/stop area)

[@beadaholique]

Thank you for the suggestion. Currently, we have this video: kzbin.info/www/bejne/sGSQaoSgbbCoiLM

[@MissTeaq]

Thank you‼️

[@beadaholique]

Glad we could help!

[@updownstate]

Is there a printed pattern for the bracelet? It's pretty and dancing and flirty.

[@beadaholique]

We want to kindly note that the printed patterns are only available with purchase of the kit. You can find the kits on our website in the following link: beadaholique.com/collections/jewelry-making-kits?_=pf&pf_t_product_type=0-Product-Type%3AKit&pf_t_style=0-Style%3ABracelet&pf_t_technique=0-Technique%3ABead%20Looming Thank you.

[@VeronicaSandoval-Guzman]

What thread do you use and what size?

[@beadaholique]

It's Nymo size D - beadaholique.com/collections/beading-thread-needles?_=pf&pf_v_brand=Nymo

[@VeronicaSandoval-Guzman]

@@beadaholique thank you! I can seem to make the bracelet but I can’t seem to finish it! I’m having a really tough time

[@jessifourre5119]

What thread is being used in this?

[@beadaholique]

We use Nymo Size D :) Here is a link to the thread on our site: beadaholique.com/search?type=product&q=nymo+size+D

[@ianmason6539]

Cool loom!

[@beadaholique]

Thanks :) You can see more about the jewel loom on our site if you're interested www.beadaholique.com/beadalon-jewel-loom-kit-weave-necklaces-bracelets-and-more.html

[@TwiigssGames]

Dear Beadaholique, Where can I buy just plain old slider clasps like the ones you show in your videos? I have looked in Jo-Ann fabrics and do not see them there. I've been very discouraged lately from doing bead loom projects because I can't find those slider clasps sold in stores. I haven't looked online yet, but if there is any help you can provide me, it is greatly appreciated. I have all kinds of ideas for bead loom projects, and my second one that I did didn't take me long at all, and I am enjoying doing it more than cross stitching. But without the slider clasps, I don't feel like I can make more until I can somehow get the clasps. Thank you. EDIT: I am working with size 6.0 Miyuki beads. Will the clasps still work for that size bead?

[@beadaholique]

Thanks for watching our video! I can confirm we sell these clasps on direct site! I will provide some links below: Beadalon Slide Connectors, with Extension Clasps for Multi-Strand Projects 26x5mm, 1 Set, Gold SKU: FCL-9309 www.beadaholique.com/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-26x5mm-1-set-gold.html Beadalon Slide Connectors, with Extension Clasps for Multi-Strand Projects 13x5mm, 1 Set, Silver SKU: FCL-9310 www.beadaholique.com/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-13x5mm-1-set-silver.html Beadalon Slide Connectors, with Extension Clasps for Multi-Strand Projects 20x5mm, 1 Set, Silver SKU: FCL-9311 www.beadaholique.com/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-20x5mm-1-set-silver.html Beadalon Slide Connectors, with Extension Clasps for Multi-Strand Projects 26x5mm, 1 Set, Silver SKU: FCL-9312 www.beadaholique.com/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-26x5mm-1-set-silver.html Beadalon Slide Connectors, with Extension Clasps for Multi-Strand Projects 13x5mm, 1 Set, Gold SKU: FCL-9307 www.beadaholique.com/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-13x5mm-1-set-gold.html Beadalon Slide Connectors, with Extension Clasps for Multi-Strand Projects 20x5mm, 1 Set, Gold SKU: FCL-9308 www.beadaholique.com/beadalon-slide-connectors-with-extension-clasps-for-multi-strand-projects-20x5mm-1-set-gold.html

[@narsrinsanati8712]

Nice👍👍