How to fit a RYCO R2619P Fuel Filter in a Toyota Hilux

The video will show you the correct way to install the R2619P fuel filter on a Toyota KUN Hilux.

[@shanep4]

Informative, compact video 🙂

[@kenward5284]

What about replacing the O ring ??

[@williamcarvajalibanez1793]

OK, VERY GOOD THE VIDEO CORRECT WAY TO INSTALL

[@fahadfaisal3393]

After how many Kilometres the fuel filter should be changed ? And what are the symptoms of a dirty fuel filter ?

[@RycoFiltersOfficial]

A fuel filter should be change via manufacturers specifications which normally is found in your owner’s manual if you do not have access to the owner’s manual you can contact your local Toyota dealer for this information. With Symptoms to a dirty fuel filter there are none you will only notice this when either it is completely blocked or you have contaminated fuel in this case your vehicles engine will run inconsistent as to its normal operation.

[@ShupNride]

It's made in China I wouldn't even put it in your car

[@jasonblake7482]

Should replace oring also

[@CamperKev]

The answer is yes. The replacement O-ring comes with the new filter. They forgot to mention this in the video. Here is another video which does mention it. kzbin.info/www/bejne/m2q2fYmPfZd3o5I

[@panther47810]

O ring ?

[@RycoFiltersOfficial]

FYI the o-ring is currently supplied with the R2619P.

[@derekwallace4687]

Yes.Good point. What about the O ring ?

[@dd07871]

Unfortunately my car is now making a whining noise after changing to this filter.

[@RycoFiltersOfficial]

Hi Danny The whining noise may come from the air in the fuel system, you may need to check the following: 1. Was the big o-ring for the housing replaced with a new one as supplied? 2. Check the alignment of the housing and lid (more details instruction can be supplied) 3. Priming - press pump on the top lid repeatedly until it becomes hard Our customer service team can send you some images with more detailed instructions to help through the points we have suggested. You can email them @ [e-mail] or message us via Facebook.

[@vnspool]

How do you bleed the air if it becomes trapped after changing this filter please.

[@dd07871]

@@vnspool See from 1:15. Keep pressing until it becomes stiff. There's quite a few other videos on KZbin showing the process.

[@dd07871]

@@RycoFiltersOfficial Thanks for the tips. The noise turned out to be coming from an alternator bearing. Replacing that too got rid of it.

[@theyorkshirelad.]

@@RycoFiltersOfficial hy what markings are there I cant see any mines sucking air in