How to fit any Batman figure in the 1/10 scale Hot Wheels R/C The BATMAN The Original Batmobile

[@greatjob2023]

I opened my Batmobile like 10 times already 😂. I know replaced all leds and added a ton more. I reinforced the front bumper with 2mm thick steel plates. Now it's a killing machine 😅

[@KingCool007]

I got mine today. I just tried it out and the outer plastic is very sensitive. I found that out after the car crashed against the wall. The scratch is not that bad but you gotta be reallll careful while driving it. As for the figure or any other batman figure to fit in....well...I separated the upper torso from the lower body and slipped the upper torso through the window. And without taking the outer shell off. Try it out it's easier All in all great review and thanks for the tip

[@walterpiper8947]

Love the lone sandal on the floor.

[@Johns_Corner]

Ah yes a little home personality for you 🏡🩴

[@felipegomez6729]

Just did it a couple of hours ago and I wish I coudy share the results here,but am doing it in my blog and to a recent question about the Lights;...yes,it has the insert pieces for the front exhausts and for the Tail lights. I repainted the Batfigure,sat him in and added a Harness for additional Realism and detail and even got his hand on the Steering wheel...next up,is Weathering the Batmobile. And TNANK YOU FOR THIS VIDEO,agaiy 🙏😁🙏

[@Johns_Corner]

No problem! Love the fact that everyone is doing there own modifications!

[@mraw5960]

Is there a light kit you would recommend so that you can take advantage of all the areas where lights could go?

[@felipegomez6729]

@@mraw5960 I'm sorry,I wouldn't really kno.i just use the LEDs from the Dollar Store and those actually work just fine. Am just soldering the LEDs I'm adding to the existing ones on the board.just gonna make sure, there's enough wire to reach nicely

[@davidmarrero9608]

Great tutorial, I've been watching videos on people who make hinged doors on model cars which I think would work well on this RC Batmobile which you should make another video showing that off

[@felipegomez6729]

Thought of the same thing about the doors,but just wanted to see if the body would come off in one piece for the customization & alignment of the doors to be easier.

[@felipegomez6729]

Excellent Video 🤙 Wanted to make sure,it could be done, without damaging the Body.. thought of cutting the door & make it Open/Close.then again with all the vibration they'd just keep opening.but a couple of Magnets takes care of that problem. Now I thought of getting the Batfigure specifically for the Car & for it to just sit there & keep it there. My plan is to do a little Repaint job on the figure, remove the cape & put a thinner one(just for show)and that, should give a little more room on the figure,also adding adding a seatbelt for added detail and Realism,along with a simple Repaint on the Batmobile as well. That should give it a bit more Eye-Candy.😁🤙

[@SkibidiDynoz]

I'm your 7th subscriber

[@Johns_Corner]

Music used in the video! kzbin.info/www/bejne/g2rImWWoeZqin6c

[@caesarguajardo4851]

Because of this video I ordered mine, thanks Brother 😊

[@benjaminshin9439]

Love your video. I have a question regarding the figure. There are so many Batman figures on ebay, which should I get for a best fit? Please kindly let me know. Thank you so much.

[@rebelknightrider4473]

thank you so much for this video!

[@CBH0072]

If you slide him in the passenger side carefully, he will fit right in trust me I did it easily, the trick is to put them in the passenger side,then slide him over

[@c.k.hobbyshop3351]

good review 👍 on how to remove the body

[@Johns_Corner]

Thank you 🙏🏼

[@troymay7362]

Does anyone sell a Mcfarlane The Batman cloth or soft rubber cape? That'd be PERFECT for this machine.

[@ryanscottmcclure]

There’s some on Etsy and eBay. It’s not hard to make it yourself. His chest plate pulls up pretty easily to glue in a new cape

[@leososa3306]

muy bien amigo :)

[@Johns_Corner]

Gracias

[@JB-tq1sl]

I'd be nice if I had a Batman figure which you could never find

[@devoncrestway338]

custom cloth cape would help lol

[@Johns_Corner]

Looking into this myself but I was already tempted to get the mezco Batman so who knows.

[@packlesswolf1]

They still haven't sent mine and I did My order on 6/14/2022. Still says " unfulfilled ".

[@TheAsh69]

This is not Mattel Creations Batmobile right ????

[@luisd.pacheco1074]

GREAT TUTORIAL, I hope that Mc FARLANE makes the batmobile from "THE BATMAN" for 7inch figures, why make the motorcycles and not the BATMOBIL? The best BATMAN toy is the BATMOBIL, and the one that Hotwheels has made to scale can't open the doors that Hotweels was thinking of, well I thought I wouldn't help the Mc farlane figures, I would have bought it but $100, cheap plastic no taillights, do not open the doors. it is in my opinion an R/C for $30 not $100, Spinmaster did it for the 4inch figures, why Mc Farlane has not done it for 7inch, he made the BATMOBEAST that nobody asked for but the BATMOBIL NO, unless he is putting his effort for the KEATON/AFLECK BATMAN toys in the FLASH movie MAYBE WE'LL SEE ONE BATMOBILE or MAYBE TWO? WHO KNOWS ?

[@Johns_Corner]

We’ll just have to wait and see!

[@davidmarrero9608]

There's videos on KZbin with people who make hinged doors for model cars where they cut off the doors and use plastic rods and metal wires to make hinged doors. Think that same method would work on this

[@luisd.pacheco1074]

@@davidmarrero9608 I'll try to see them THANKS

[@NeptuneKnives]

22 min

[@Johns_Corner]

Yeah sorry I’ll definitely work on keeping a script and making videos shorter for the future thanks for the feedback!

[@roydevriess]

@@Johns_Corner dont worry about the lenght. I just put on your video on and felt safe enough detaching the body from the car. Thanks a lot! It works wonders. Lights should be easy enough to install