How to fit parking sensors to your car (Park Safe rear sensors, Audi 83 8P)

A "How to" style video showing you how I fitted my park safe sensors to my Audi A3 8P 2009 2.0 TFSI Quatrro, showing you the problems I came across along the way

[@renatleongardus467]

BIG TIP!!! 1 = Remove the the rear bumper. 2 = On the back of the rear bumper, there is already marks like this + + + + it's meas you have to drill the hole there. You welcome! GOOD VIDEO BRO!

[@petersavage1989]

Thank you so much for this helpful video. It encouraged me in that it’s not only me that approaches these jobs wrongly but in seeing you removing the rear lights and rear bumper made me steer clear of that method. Well done and thanks you saved me hours. 😂

[@robclaireticehurst7293]

Made the same error with the light cluster as you!! Was going to start pulling all sorts of cables out but your video has saved me! Cheers from New Zealand.

[@ojsannals6877]

Rob & Claire Ticehurst No problem. Glad it helped someone!

[@yany1440]

You have a star shape on the back off the bumper, you do not have to measure anything. You just have to take the bumper down and make a hole.

[@ojsannals6877]

Well that's good to know!

[@sharifzaman6444]

did you use the angle mount or flat mount sensors? i bought the same car as you.

[@derekgoodwin6646]

Hi did you need to take the bumper of ?

[@ojsannals6877]

No, you don't need to take it off. Although it took longer, I did find it easier taking it off.

[@PureGamingpro]

Just the wiring wasnt clear how you tapped the brake light wire and connected it so when you hit reverse it activates it

[@jesusloveyou9523]

Good lad gave you a like

[@ojsannals6877]

Thanks!

[@matthewbaxter7502]

Hi what model sensor kit did you use please I know its park - safe. Model no ? Very helpfull video. 👍👍

[@raimondandzans8286]

Did car show any error? For example..electricity leakage?

[@Alparslan5757]

For the holes are marked from the inside. Just clean it beforehand.

[@aqib2000]

This is not oem