How to fix a Broken pvc pipe

3 WAYS OF FIXING A BROKEN 3/4 PVC PIPE

[@DavidSmith-uz8lw]

THANK YOU. I really appreciate you taking your time to teach this. I couldn't find any other good videos. This was perfect!

[@lycaon7888]

Thanks for the tips. I especially like the third method as I have to occasionally repair broken irrigation pipes from my well. The pipe extends over 5 acres with about 6 sprinklers - 1 every 200 feet. As it is now, I have to dig up about 4-5 feet on either side of the break so that I can lift both ends to put a coupler on. The 3rd way seems to be a lot easier for me. Thanks

[@Kicknback]

Thanks for the video - all 3 ways were interesting.

[@Irrigationplus]

Thank you

[@rustyhook8698]

Thank you for all the options Good job

[@DensterNY]

Thanks for making this video. I have a break that I have to fix and you gave me some more options.

[@tayler2396]

Nice video! Method 3 looks like the best solution I have seen, but I cannot find any product like yours with long enough flares/bells. Everything I find at Home Depot or Lowes has short flares that would not help at all.

[@lynnsarraille7360]

Thank-you for showing all the ways to do a repair....one extra could be to give us the name of each repair product. But, good video.

[@fpaz3301]

Awesome ....didnt know at all . Keep up the great work.

[@devash932]

Very helpful video. Thanks 🙏

[@mpopskylar]

very good

[@tsegaia2909]

Thank You For vThe Info Brother ❤

[@007yankeesrule]

I tried cutting one eith a dremel and ended up cutting the pipe nect to it also. 😢 Goi g to try one of these methods on both pipes. Thank you

[@akshelby33]

Thank you!!!

[@timhardman4764]

Where did you buy that 20" pipe with the long Flared "Bell" end that is 3 or 4 inches long? All the flared "Bell" end pipe I find has a very short flare; not long enough to do the slide effectively like the one you show here. Have you ever tried making a long flared Bell end yourself from a piece of regular pipe using a heat gun? I've seen other KZbins on thermo forming PVC but it's usually for just an inch or two at the end and not 4". I can imagine things getting wiggly and wrinkling when trying to slide a cold pipe inside the heated end if pushing in that far (4") to form a Bell end. Has anyone reading this tried that?

[@cvega78]

Mind sending me name or where can I purchase that second fitting can't find it anywhere will appreciate it

[@TWash3]

What is the pipe that you used to fix it called?

[@nelsonbrum8496]

5th video I've watched this morning where there is no deburring or chamfering of the pipes before solvent bonding the patch...

[@cvega78]

Was the second fitting called a " repair slip coupling " ?

[@Irrigationplus]

Yes, repair slip coupling is the name. I get them from a place call Ewing irrigation or Home Depot

[@Ralphie5023]

Cat da pipe & da caplin

[@tipsunknow]

Good Idea ? but not very concise? It can be shortened and more understandable

[@riclmena9395]

And why are you wearing gloves

[@riclmena9395]

Why spend more money on that compression fitting when you could just use a full slide coupler and just paid 50 cents

[@Irrigationplus]

This are just options for home owners or people with no experience

[@jcbm6074]

Still have to buy sand paper and glue

[@tayler2396]

What's a full slide coupler? Is it a coupling without stops? I've never seen those in the big stores, I don't think.