I saw the whole thing. It doesn't look hard to fix the leaks. If I ever come across a leaking inflatable boat, I will know what to do. Good video Lee 🖐
@LeeThoeun3 жыл бұрын
Thanks for watching, and I appreciate your continued support. I was putting a brake on acting in Khmer karaoke and tried to do more recreational activities. And sometimes, the action can give you (me) a little trouble, but that's okay. We can fix it together :) ✋
I have an Intex Mariner 4 that I have a Minn Kota trolling motor on. I use to run the trolling motor with a full size deep cycle battery like you do. I got tired of lugging that thing around so I went down to Batteries Plus and purchased a DURACELL Deep Cycle battery; model number DURDC12-35J. Its less than half the size of a full size battery and I can fish all day long with it. It's never left me without power on the lake. One of the best things I ever did for my Mariner 4 raft!
@LeeThoeun3 жыл бұрын
Wow! Thanks for the great tips on the Deep Cycle battery. Yeah, I'm getting a bit tired of hauling the heavy battery too. So, I switched to a kayak for now. Mariner 4 is much bigger; I might change to that one as well.
@rangerguy1963 жыл бұрын
Nevermind! I watched the video a little more and you showed what it was. 😊
@LeeThoeun2 жыл бұрын
Cool. Thanks for your visit.
@wendelldenny93062 жыл бұрын
Great idea..I done the same with my mariner 4..but one problem..remains sticky where I sprayed..it never fully cured
@LeeThoeun2 жыл бұрын
Yes, it's a mess. I ended up buying a new pontoon boat.
@hntrains2 Жыл бұрын
@@LeeThoeun, what pontoon boat did you get?
@hntrains2 Жыл бұрын
The best way to fix a leak is to apply a patch over it. If the bottom is punctured or cut, apply a patch on both sides.
@LeeThoeun Жыл бұрын
Great tips! Thank you 🙏
@rodrigogarcia2622 Жыл бұрын
Do you recommend any kind of patch ?
@hntrains2 Жыл бұрын
@@rodrigogarcia2622, the boat manufacturer makes self-adhesive patches ("Repair Patches - 6 Pack"). You can, of course, go for those made by other companies (such as Bestway). I have used such patches mainly inside the boat; on the outside, too, but not under the boat (though I should test and see how they fare in the water). When the patch must be placed below the waterline, I use patch and glue ("Bison Vinyl Plastic/Soft Plastic Adhesive Colla"), the kind which does not require heating and can be applied even while out on the riverbank. Clean the surface well, cut the patch to size (I generally go for a two-centimetre radius for punctures), round off the corners of the patch if the patch is rectangular, and apply as instructed (press well); if you use glue, give it time to dry. If you are on the river/lake, your can set off again in about half an hour (that is, in warm weather; in cold weather, things might be different: last winter, for instance, I had to reapply a patch two times and wait from one day to the next to get the patch set). P.S. I have tried all kinds of tape (duck tape, Gorilla Tape...), but they will not stick well to the PVC. Such a tape would be ideal for repairs; hopefully, they will make it one day!
@LeeThoeun Жыл бұрын
Awesome tips. Thanks for your time writing and sharing your experience.
@hntrains2 Жыл бұрын
@@LeeThoeun, thank you for sharing your own! Have a great weekend!
@Wowwow-wl3kx15 күн бұрын
without finding leakeage point, just sealing first. to me it is nonsense
@jamesdevine4790 Жыл бұрын
How well did the repaur hold up?
@LeeThoeun Жыл бұрын
Not good
@jamesdevine4790 Жыл бұрын
What product did you use?
@LeeThoeun Жыл бұрын
I forgot what it was. It was so sticky.
@lisaAIdol2 жыл бұрын
Did the sealant hold up? Was there still leaks?
@LeeThoeun2 жыл бұрын
The sealant was a temporary fix and it's messy. I would not recommend it.
@rangerguy1963 жыл бұрын
What did you spray on the bottom of the raft?
@LeeThoeun3 жыл бұрын
I used Flex Seal; someone recommended it. It's not working! Do you know of a product that works? The water seeps into the bottom part of the boat, 4-5 gallons at times, and I could not find where the leak is coming from. I thought it was from the seams, so I sprayed it.
@billzollweg75882 жыл бұрын
Half the video is watching the guy pump air! What the hell is he spraying anyway?
@LeeThoeun2 жыл бұрын
Thank you Bill. Appreciate your input. There’s a room for improvement on video recording on my part.
@baderalnahdi917 Жыл бұрын
Please let me know the name of the spray
@LeeThoeun Жыл бұрын
It's the Flex Seal spray.
@beanysamuels6193 Жыл бұрын
How old is this mariner 3 tho ???
@LeeThoeun Жыл бұрын
It was new, but it got punctured and I could never repair it. Please see my other video on my 8.2 Ft BRIS Pontoon boat. It's much better quality.
@haroldsfishingadventures7549 ай бұрын
HH-66 for the glue
@LeeThoeun9 ай бұрын
Thank you 👍
@mikemurf9512 Жыл бұрын
Please change name of vid to how to pump up boat because that's all your really doing...