DISCLAIMER: this was NOT a traditional carb used in the video and the float was inserted the wrong way then it would in a traditional carburetor. Put the float valve in the opposite way than what is depicted. The black needle side should be facing down and the other side contacting the float.
@duck_iskate53023 жыл бұрын
Mine is still leaking what should i try next
@joellevi59793 жыл бұрын
I guess im asking randomly but does any of you know of a way to get back into an instagram account? I somehow lost the password. I love any help you can offer me
@xzavierdean78223 жыл бұрын
@Joel Levi instablaster =)
@joellevi59793 жыл бұрын
@Xzavier Dean I really appreciate your reply. I found the site on google and I'm in the hacking process now. Takes a while so I will get back to you later when my account password hopefully is recovered.
@joellevi59793 жыл бұрын
@Xzavier Dean it did the trick and I now got access to my account again. I'm so happy:D Thank you so much you saved my ass !
@philliphutton65936 жыл бұрын
I noticed the needle upside down too. LoL
@Lore-wv5mt4 жыл бұрын
Yes!!😂😂 n it wasn't old too
@randytrivitt65393 жыл бұрын
Yes I noticed it too. 👍👍🤪😂😂
@amhunter45187 жыл бұрын
You put float needle in upside down
@boilsj98214 жыл бұрын
Yeet
@airlessgoose54143 жыл бұрын
it was a chinese carb this model puts it in backwards
@johnhouli3450 Жыл бұрын
That can’t be. The rubber tip needs to seat. No where to seat upside down.
@Timmward Жыл бұрын
@AirlessGoose54 no, I have the exact same carb, he literally had it in backwards
@kx1260 Жыл бұрын
@@Timmwardhow the fuck do you put it in right then?
@bobolson50864 жыл бұрын
The compressed air work out great 👍 👌 👏 thx..
@JoeAshtonChaosIncarnate4 жыл бұрын
Thanks man very informative but you dont go on and on. This vid saved me alot of headaches great job bro
@LetsRideUSA4 жыл бұрын
Joe Ashton thanks man! Glad it helped! Feel free to subscribe.
@esteslandscaping69474 жыл бұрын
Just what I needed to hear! Thanks! I’ll get to checking it and catch you later.
@lucab13156 ай бұрын
So glad u helped me with this bro easy fix
@Timmward Жыл бұрын
Wtf he literally has the needle in backwards
@jonparker84764 жыл бұрын
thanks, bro very helpful.
@pixel65803 жыл бұрын
was trying to fix my carb very similar to yours but the O-ring came loose.. it's like impossible to get it back into place
@jasjeetmahal26943 жыл бұрын
Thanks man my bike rides very good now
@soundspark Жыл бұрын
Does this apply to push mowers too?
@connorpower84766 жыл бұрын
Very good video bro, well executed and informative
@waynendimande87413 жыл бұрын
Thanks you helped me
@vincentnickens6044 жыл бұрын
This video helped me out a great deal. Thanks for the info bro.
@cc040419846 жыл бұрын
Dude, float needle hangs on the float body, doesnt sit inside carb channel and upside down too. Point goes toward inside, not facing the float.
@geomorera47175 жыл бұрын
Just put an airfilter kit on my predator 212 and i have gas leaking out of my filter.... did i not put the jet on tight enough or could it be the bottom bowl not on properly or my spark pluf
@SolidShotsFilms3 жыл бұрын
I’m trying this
@abdul-q-khan Жыл бұрын
It's not leaking. It's Carburetor overflowing which is technically called Carburetor flooding. Leaking is when petrol go out through the gasket.
@veemall44162 жыл бұрын
How do I order the correct valve for a specific carburetor?
@elimaslonka17512 жыл бұрын
Your a life saver thank you so much
@laprepper5 жыл бұрын
i dont think all floats are spring loaded, as far as "bouncing back"
@bowwow2554 жыл бұрын
read the video discription
@sanjayagrawal49235 жыл бұрын
What price of this bike in India ? From where buy this in India .
@Falling_Down_D-FENS6 жыл бұрын
nice and informative.. i think i put the valve in upside down too, couldnt remember which way hahaha
@randytrivitt65393 жыл бұрын
Yes I seen it too. 👍👍🤪😂😂🇺🇸✌️
@andrewselmon22756 жыл бұрын
Yep upside down float valve the first one was upside down as well that would have been your problem. I’m looking for answers but instead all the videos I watch I’m giving them answers somebody has to have something useful to watch lol.
@jimhattie63492 жыл бұрын
thank you
@theblaze1957Ай бұрын
Thaaank u brooo❤
@jerrypack337 жыл бұрын
So helpful thank you
@silverchest12 жыл бұрын
I got spark and gas but dosnt start pfff
@007mercucio6 жыл бұрын
Really, I hate to say anything to make you look like you made a mistake, but you made a mistake here. As everyone else is saying, your float needle is oriented upside down. That side with the spring in it orients toward the moving float. The side with the cone shape faces toward the hole. Visualize how that blocks the hole off when pressure is applied. You get nothing (no fuel seal) from shoving a mismatched spring needle down into that hole.
@Mrfurballs2 жыл бұрын
what does it mean when you only leak gas when your choke is “ on “ ??? a cold start . I own a 1983 atc 250R
@cocoguardian66795 жыл бұрын
I have this problem on my mx80, my bike just wants to die and just sputters slowly till dead
@ethanelectric10245 жыл бұрын
Welp idk
@114wildfire5 жыл бұрын
Why was the float valve not hooked up to the float tang
@jonathanpsychowaynewilbank95204 жыл бұрын
cause if was upside down
@saiesafari96406 жыл бұрын
where can I buy a float valve ?
@dickbill7budz6452 жыл бұрын
Thanks bro that fixed my issue big ups!
@gamingzone72006 жыл бұрын
Nice video thanks bro
@wyattdavies20884 жыл бұрын
Appreciate it 👍🏼
@tylereubanks16134 жыл бұрын
the float valve was backwards smh
@pompew61835 жыл бұрын
Your float valve upside down,
@castroautodetailsmobiledet65873 жыл бұрын
This guys made my day with his knowledge the part where he said the bouncy pump was the trick to fix my carburetor he is great and what i really really appreciate was such a short video because i hate to waste my time
@HowardianMotoVlog5 жыл бұрын
thank you, very informative
@hmroa30565 жыл бұрын
Your "float valve" (needle) was upside down on your demonstration, and you did not place the "new float valve" correctly into the prongs of the float, which will cause failure of the needle to seat correctly to shut off fuel.
@wazup33334 жыл бұрын
what do you think is causing this? streamable.com/smlbx4 carbs were cleaned few seasons ago, inspected carb it looks extremely clean
@kx1260 Жыл бұрын
You didn't explain how to fix that issue.
@tfmobilewash8402 ай бұрын
I was about to say that like hold on 😂
@piotrhupert63143 жыл бұрын
Praises to you good sir. You just saved me from disassembling four, 40y/o carbourators, a job I was dreading.
@DuckQuack02 жыл бұрын
Lmaoo i just disassembled my kz1100s 4 carbs
@HawkGTboy9 ай бұрын
I have a Honda VFR with four carbs. When I needed them cleaned I happily paid a guy to mess with it. I took one look at the exploded part diagram and said “NOPE.”
@BandaveliP6 жыл бұрын
Great video man💪🏽💯 This is exactly what I needed To See ! Thanks
@willardjones81716 жыл бұрын
Very helpful thanks so much bro you know your stuff I'm new at this
@unrulyryder3 жыл бұрын
He don’t know nothing cause if he did he would notice the float needle is upside down and he took it out and put it back the same way clearly he don’t know his stuff. Follow @ Unruly Ryders I do it correctly 💯
@chickiesadventures16962 жыл бұрын
Thankyou so much! Im a girl and I dont know anythig about engines. Ive just bought a small ATV for my field and it started to dump petrol from that tube. Now I know where to look, how to turn it off, I didnt have an air compressor so I just blew up the tube, its only short. Im not sure I could take the carburetta apart but at least I have some idea of what is going on with that float. It started and fuel isnt coming out at the moment but it usually happens when I ride it for a while. Update, Ive just found my tyre inflator for my car so Im going to try that!
@erichess55662 жыл бұрын
I see that this vid is a few years old, but the float valve seat was upside down. The rubber pointy part points into the center of the carb. If you really did reassemble the carb that way, I can not imagine how that would have stopped the overflow issue.
@nipostrongheart8680 Жыл бұрын
I was going to say the same thing .
@drumminyota5 жыл бұрын
So helpful! Gonna work on bike tom. Hope trail life will be starting back soon
@jonathanmorales99803 жыл бұрын
I turned my gas off and it’s still leaking.
@Alfie-jaeSkilling5 ай бұрын
Thats probably because its still got fuel/gas in
@jerichosison33168 ай бұрын
worked for me ,I was only using my manual air pump. what happened was in the step when i opened my overflow screw nothing came out so I did next step and pump some air inside then some dirty gas came out like darkened gasoline but only a few then i pump some more air then more dirty gas came out and then redder clean one few seconds later, when it stopped spewing gas, tightened my overflow screw then turned it on with few tries like 25 kickstart, Good news was when it turned on no gas was leaking. This moment I will never forget in my life, more DIY wisdom. " thank you very much for sharing this informative video"
@KendrickDobb-em7cx5 ай бұрын
I tried this compressed air technique on my 2000 honda xr100r and it works well. Lol
@tgarvinio3 жыл бұрын
great video! no big preamble, straight to the point!
@j.d.73216 жыл бұрын
Thanks for sharing, the rubber o ring was damaged on my carb which might have contributed to the leak as well.
@joshmathis78736 жыл бұрын
EVERYONE THIS IS IMPORTANT DO NOT SHOOT COMPRESSED AIR THROUGH YOUR OVERFLOW TUBE CARBS ARE SENSITIVE TO AIR FLOW..... This guy is a joke he put the needle in wrong and telling people how to fix their bike when he's basically setting you up to buy a new carb bc its going to break more from the airflow.
@SuperMattcom6 жыл бұрын
Oh crap!!! I shot air through mine and now it leaks like crazy !!! What should I do??!!
@kill-switch22486 жыл бұрын
SuperMattcom buy a new carb, now its shot. Never spray compressed air up the overflow. All thats going to do is spray all the crap and mud in the tube right into the carb and its going to get EVERYWHERE
@woavi27146 жыл бұрын
I have a slight leak in my float system I'm pretty sure but I'm scared to check it bc I don't wanna mess it up more
@kill-switch22486 жыл бұрын
Matt Eggleston carbs are very easy to work on. If ur afraid to work on it take a bunch of pictures of it while you taking it apart so you can refer to it when putting it back together. If your leaking gas your float is either stuck open or not set right. Id take the carb off, and the float and clean everything real well and put everything back together. If that doesn’t work watch a vid on setting the float height, its very easy. 👍
@woavi27146 жыл бұрын
@@kill-switch2248 thanks man I deffinalty will do that
@61spindrift5 жыл бұрын
All the commenters are unfortunately correct. You did not put the needle in the right way and you did not connect it to the float. This was a total fail. That should however not prevent you from taking things apart and trying to fix best you can. Just don't make instructional video's unless you can complete the job correctly so people watching can learn.
@wayneellis15655 жыл бұрын
61spindrift very well put. kinda goofy
@random123454572 жыл бұрын
you're a legend mate!! the air up the overflow pipe sorted out my carb, cheers
@omt48732 жыл бұрын
Same, I’m so happy I didn’t have to take apart anything
@JovanMladenovic2 жыл бұрын
Thanks a lot man! Had the same issue and your vid helped me fix it! 🙏🙏
@kolkam109r4 жыл бұрын
Thanks for the video ill try it on my generator, but whats wrong with leaking the remaining gas on the groung?
@LetsRideUSA4 жыл бұрын
Leaking the remaining gas on the ground could cause the pavement to stain, so I like to empty the remaining gas into a container. Glad this video could help!
@animaddox3744 Жыл бұрын
you put the float valve in backwards
@drakekeith32073 жыл бұрын
Lost a whole tank cause of this
@Kx-ns9ob3 жыл бұрын
Wait isn’t hat flout valve in upside down?
@corybell12552 жыл бұрын
I'm confused was that float falve upside down pretty sure it was
@VashStarwind Жыл бұрын
Yes def was
@coletrick87486 жыл бұрын
I’m gona help you out let’s ride USA. Gas coming out of the drain tube is caused from either 1 a stuck float, 2 the float needle has debris or dirt inbetween the tip of the needle and the carb (not allowing the float needle to seat therefore causing the gas to overflow), 3 the rubber o-ring is bad on the drain screw or 4 the drain screw is loose.
@D.R.2704 жыл бұрын
Or 5: the float has a hole in it and isnt floating.
@tallontodd20383 жыл бұрын
thanks m8 I really didn't want to buy a new carby for my bike so I clicked on the first carby fix vid I found and it was yours and the first method fixed it cheers m8
@romeparrilla83074 ай бұрын
thanks for a nice video.and i was gonna ask you if my carburator ever gets dirty or clogged,can i just spray carburator cleaner to the hose and blow it with compressor?thanks again..
@staceyrizzo3116 ай бұрын
great video my question is i have a 06 Kawasaki kx450F i am leaking fuel from the overflow on the top of the carb overflow is this something different thanks
@intelin1233 жыл бұрын
All these carb experts commenting about upside down needle but dont make no videos
@LetsRideUSA3 жыл бұрын
thank you
@VashStarwind Жыл бұрын
Well it is upside down lmao.
@laurenssuijdendorp61862 ай бұрын
Thank you very much for making this video! I was about to go to the machanic but you safed me so much money. I’m doing it myself thanks to this video
@steves8012 ай бұрын
Thanks a bunch! blew about 60 psi up the drain tube and didn't work. Then blew 100 psi for a lot longer and that did the trick.
@ЛукаЖивковић-я5п3 жыл бұрын
My problem: i need new needle, but i live in Serbia, and there are no parts for my dirt bike (ttr90) in Serbia. I dont want to buy it on ebay because i hate waiting 3 months for package to arrive, and shipping price is huge, like 70$ shipping.
@sippingtonciti4 жыл бұрын
Mine is a healthy flow but still leaks
@AloEfra-ub9uf22 күн бұрын
Thank you . Resolved my problem and back on the trail ( this is very helpful till this day . 🤝🏽
@rexborres7676 жыл бұрын
i am not an expert but i tried opening and cleaning a motorcycle carburetor and i noticed even the first time that the needle and the float should be connected, if you successfully removed the float out from it's bowl the needle should come with it.
@TONYSalas-p8d3 ай бұрын
Wow bro I appreciate it a lot u saved me 250 dollars man the bike shop said it’s a broken over flow or sum like that but I bllew air in it and it works fine now thanks bro I love u
@dougo65714 жыл бұрын
The float was in upside down and the needle hooks into the float. When you install them you install them as one unit. I guarantee you that bike did not run
@VashStarwind Жыл бұрын
4:25 Dude your float needle is upside down ha. The rubber tip of the needle is suppose to go inside the carb not on the float. Thats why your float wasnt working. Theres no way the needle can seal the fuel from leaking if its upside down like that
@rashidnaga3 жыл бұрын
Engine kawasaki 110 125. You install carburetor wave 125 slide 24mm and use block 63mm its like monster
@DontLookHere-ky4jr20 сағат бұрын
Hey bro 7 yrs later and the air compressor trick still helped me out thanks a lot bro 🙏
@woavi27146 жыл бұрын
The gas line on my ltr only has the options of on, res, and prim what would I put it on or would I have to drain all the gas in the system completely
@roderick27222 жыл бұрын
Thanks because of this simple video I fixed my son’s bike! 😊
@gromblebee6022 жыл бұрын
My ssr 125 pit bike leaks out of the over flow tube when I wheelie could tjat be the float valve???
@modernknight68713 жыл бұрын
You don’t know a thing about carbs because that overflow valve in upside down so there is no way you fixed that
@irofue3 жыл бұрын
Thank you man it really helps me. I appreciate your time.
@Luui2x Жыл бұрын
Mine is pouring right out the over flow and it won’t even turn on .. Kim 125 sx
@knobbyvlogs6104 жыл бұрын
on my bike the petcock would be sideways if the gas is on so i think he turned it on not off
@cyclonesky1988 Жыл бұрын
My bike also had the same problem! Need someone to fix this!😭🙏🏻
@awsker132 ай бұрын
The best video!!! Not just blow air thru it...badass work dude
@DB-xp9px4 жыл бұрын
Anyone have any thoughts on why fuel would drip out of the carb overflow valve when everything seems perfect with the needle and float? i cleaned it all out, making sure the needle could freely move and that there are no cracks in the float. this is driving me bonkers.
@Mister_Michael4 жыл бұрын
Have the same issue atm, ordered a new needle and float.
@DB-xp9px4 жыл бұрын
@@Mister_Michael did replacing the needle & float fix the fuel supply flow?
@Mister_Michael4 жыл бұрын
I haven't got them , will let you know
@proarmy70 Жыл бұрын
@@Mister_Michael did it fix the problem?
@Mister_Michael Жыл бұрын
@@proarmy70 yes it did, I also added a fuel shut off valve in between the fuel supply
@Dkeralite6 жыл бұрын
Hi. I am a newbie to the bike stuff. I am seeing fuel leak from carburettor. Still figuring out what causing it. I just want to know is about that drain pipe. Is that left free or should we connect it somewhere cos while I was cleaning I saw it was hanging below, was a bit frightened. And after seeing your video the tube just hangs out. Is it okay... Please let me know.
@Realofficialdee5 жыл бұрын
Still need help?
@cooperdobson14715 жыл бұрын
It’s their to drain excess gas from the carb it supposed to be dangling their
@Brzsteve862 жыл бұрын
Just bought an ssr out the box and it was leaking think i should clean it even tho its new?
@Rawtruthe4 жыл бұрын
Thanks, compressed air option solved the problem and just as important saved time.
@westerndevil25975 жыл бұрын
Ok this kinda helps but the carburetor on my 4 wheeler leeks out of the drain tube on the bottom of the bowl when I put gas in the tank and the float is not stuck it just leeks so et me know what the problem is
@Luburium5 жыл бұрын
you need to check all the rubber seals on the carb, there's also a possibility that you have an o ring on the pilot jet, it's the little hole that has the fuel coming through it, unscrew it and check the O-ring, might have to replace it, needs to be air tight in that tunnel where the pilot jet sits.
@kwameg.1145 жыл бұрын
Best explanation on KZbin .. thank u
@GMITRUCKING6 ай бұрын
My 08 yamaha zuma is doing this I hope this fixes it ty
@chopboss3 жыл бұрын
You legit just helped me fix my bike cause my dumb ass couldn’t figure it out for weeks! It’s working now cuz of u! Thank u bro
@LetsRideUSA3 жыл бұрын
So glad this video could help and get you back riding!
@alexmacdiver2 жыл бұрын
In the Words of Dr. Hook & the Medicine Show. . . . . " Before we begin, thank you. Thank you, all, thank you. Thank you. Thank you " Helped me today on recent purchase, tap-tap wasn't enough. So strip out and wiggle did the job.
@kikofrancis0094 жыл бұрын
The pointy part of the float needle should be pointing up (correct orientation of a carb) the pointy part is made of rubbery material so it can block and make a seal inside when the float do its thing.
@gavinbrockschmidt29732 жыл бұрын
Mine was facing downwards, do you think that was the reason my bike was overflowing?
@adampereira8234 Жыл бұрын
Yes
@jadecordukes3772 Жыл бұрын
he said that it was a traditional carb and he didnt relise
@danielg87435 жыл бұрын
this was the problem and it workt thx ❤️❤️
@stephenrice9913 ай бұрын
Thank you for this video, Let' Ride. My issue was with a Yamaha EF2400iS generator which I take away yearly to boost the capacity of the four lithium batteries in the caravan. Last year, I noticed diluted oil all over the ground sheet, but the generator still worked and I was able to continue using it. But before my annual trip this year, I thought that I should investigate further, which lead me to your post. Eventually, I gathered the necessary components to attach to the air pump and following your concise directions, I was able to blow the debris from the float bowl valve. Unsurprisingly, the generator is now working much better than it did last year, thanks to your advice! ☺
@davidpicton60114 жыл бұрын
Pretty sure that carb was just for demo purposes boys guy had 3 of em. Great video fingers crossed this fixes my problem 👍