How to fix a Pool Pump Timer - Easy replacement using the Intermatic T104

Intermec TMHDT101 - amzn.to/3tmf42H
T104 - amzn.to/3NxkQp1
T101 - amzn.to/3GHbrYj
#CommissionsEarned
How to fix a broken pool pump timer!
Replacing a pool pump timer with an
Intermatic pool pump timer
Let's first check if your timer is set to the right time.
If it is, let's check if you have any stray switches turning your timer off.
Let's make sure the timer manually turns on to see if it's a switch issue.
#poolmaintenance #poolpump #timer
As an Amazon Associate I earn from qualifying purchases.

[@snoopdoggydog5640]

Super helpful, just swapped out our old pool timer. Thank you!

[@mariesampeur-xk1zo]

The info really help thanks a million great job guys

[@stevetrimborn3739]

How do you tell if you need a 240 or 120 version?

[@oldmillrd1506]

I can hear the timer running but it is not turning. Gear issue?

[@tommyfacekicker]

Mines is running and everything but it won’t flip the switches. It just causes the switches to scratch the wheel.

[@ericwang9926]

I have the same problem. How did you fixed it?

[@baja317]

No links in description

[@madelineulrich491]

I put the new timer in and it will turn on and run, but the timer is not working. What do I do?

[@luisvila5354]

I have a pool light timer T104, I bought a T101 but there the electrical screws are in a different location. How do I hook up the T101. I think this used to be to control a two speed pump but later they hoooked up the pool lights. Thanks

[@CoElysian]

See those words on the time hand that say do not remove. Well I moved. Now I can't get my on tripper to work but the off one does. Any ideas?

[@DarrenG]

Make sure the little clip you screw in is all the way pushed in, you should be able to see how it makes contact on the back side by pulling out on the metal time part and spinning it to where the timer clip would line up. If that makes sense, my guess is just that your ON clip isn't far enough in to make contact

[@CoElysian]

@@DarrenG it's all the way in but doesn't seem to connect with thebon tripper since it doesn't turn on. The off tripper does though

[@oldmillrd1506]

Now I can see the small gears turning on the inside but the large dial is not. Not good I think.?

[@DarrenG]

hmm, it's hard to see the large dial actually turn. But if it's not working right, I would just do a full replacement since it's pretty cheap to swap it out. If your little gears are turning, that pretty much only leaves something in the timer mechanism to be broken.

[@oldmillrd1506]

@@DarrenG Thanks for the quick response. No, the large wheel is not moving after hrs of observation. Swap out it is.