How to Fix an Rain-Bird Anti-Siphon valve no glue - no pipe cutting

Replacing an anti-siphon valve no glue -no pipe cutting Need it#sprinklersystem #comoconectar

[@PURE_LUCIDITY]

Informative and helpful. But if it was me, I’d hose down the dirt and debris from the valves and pipes, before I open the valves. There were piles of dirt around the valves, that stayed on the valves even after replacing the valves.

[@susiagui7177]

Thank you for your video. So helpful.

[@Grinch83]

great video,I really needed this information

[@michelleln5958]

Very helpful video! Thank you!

[@angiegallegos1478]

Thank you. I’m going to try this first!!

[@Irrigationplus]

Good luck 👍🏼

[@angiegallegos1478]

@@Irrigationplus that did it! Now I have two more that need to be replaced. Thanks for the time saver tip!

[@ashishsavla1338]

Thanks a lot! 👍

[@mengruzhang4832]

thankyou! So helpful!!!!!!!

[@caliboy2498]

Luv to see u used old bottom pre fitted caps coz I was gonna cut bottom buy new fittings and glue to install new valve

[@caliboy2498]

@@Tendertroll1 no I didn’t n used the way u did thanks it was a great help

[@brentc3842]

How do you fix the honking at 10:30? Mine wont stop making that noise. Thx

[@TheTravellerPk]

Avoid Drilling Machine while tightening the screw,. It can break the PVC fittings

[@williamdavid6283]

Wait, wasn't the valve leaking at 10:30 timestamp or was the one without the solenoid supposed to release water but the one with the solenoid doesn't?

[@sunwoodad]

Hi I try to replace the exact the same, my valve has a leak right below the handle and above the 6 bolts. Question. Should I buy whole module? Can't I just buy the black part you replaced?

[@Irrigationplus]

It’s better to replace the valve but, replacing the parts is easier to don’t have to buy parts and glue

[@sunwoodad]

@@Irrigationplus So, just removing 6 bolts and replace the upper part is enough right?

[@robertbrandywine]

What handle? There's nothing on the valve that I would call a handle.

[@Kings-vs7om]

That takes longer than putting a new valve, but i get someone that doesnt want to mess with it.Its a quick fix.

[@robertbrandywine]

Does it? It really depends on how far from the main manifold the valve is. If it's close, then it is a real pain to repipe. Plus, I'll bet my glue and cleaner are no longer usable and I'd have to make a special trip to get new.

[@RFT2112]

Wait! you bought a new valve to replace the Diaphragm? Do know you can buy a diaphragm kit at any hardware store?

[@Irrigationplus]

Hi yes, I do know but, The vídeo is about replacing most of the parts of the valve not just the diaphragm. But, Thank you for commenting. Now people will know that they can only replace the diaphragm if they like to 👍🏼

[@jeromegiles15]

It depends where your valve is leaking from. Mine was leaking from the pressure regulator valve stem. Rainbird doesn't sell a kit for that...you basically have to do exactly what he does in this video. Purchase a whole new valve and swap out the parts you need.

[@robertbrandywine]

@@Irrigationplus That didn't work for me, though. I think I had screwed the solenoid down too tight (like they warn you not to do) and damaged the valve.

[@Saulodepittsburg]

I just bought the diaphragm kit and the issue solved! Thank you. Save money!