How to Fix " Boot\BCD "

How to fix blue screen errors on Windows 11 computers
PHILIPS Monitor 22 FullHD HDMI amzn.to/3OxUg08
ASUS Monitor 27” 1080P amzn.to/3O7ZyOq
Help me 600K Sub / netvn82
#netvn #windows11 #bsod #efi

[@farhoddjuraev3879]

Огромное спасибо. Восстановил комп за пять минут. Thanks a lot, bro. Recovered my laptop in five minutes, using your video.

[@avinashavinash3756]

Your videos really helps in real time troubleshooting 👍👏👏

[@NETVN82]

Awesome, thank you!

[@tenjinjoymira]

Thank you, this fixed my problem! My volumes were a bit different though. I didn't have a FAT32/100MB partition. I had my main partition which was about 900GB and a 500MB NTFS hidden partition. I figured I should map the bcdboot to this hidden partition so I did that and it fixed the problem!

[@DarkEvangel9237]

Could you tell me how to do that ? I'm in the same configuration and this tuto didn't work, even though the files has been successfully created

[@aliabu3464]

Me too

[@odedtzafrir1347]

Tell me too.

[@odedtzafrir1347]

⁠​⁠I chose volume 5 with the letter E which was labelled UEFI__NTFS , Fs was FAT, Type was Removable, Size was 1039 KB, and Status was Healthy. Does it have to be Fat32? I chose Fat. Volume 1 has letter C, Label is System Rese, NTFS, Partition, 500 MB, and is Healthy. Should I pick that one if all else fails? Also does it HAVE to be a partition, have 100 megabytes or more AND be FAT32? Also which drive needs to be made FAT32 and be a partition? Can I turn off my computer if I’m stuck and try another day?

[@evguenidm]

All the methods that I tried from the Internet did not help and did not fix the blue screen - this is the only solution that really helped fix the “file:\bcd 0xc0000034” error. Thanks for the solution.

[@ghass777]

This is required in most computer problems. Big thanks Prof.

[@arthurv9615]

helped me, had to set it to an other disk but still worked out, maybe explain more for those who doesn't understand that they have to select the disk with 100 mb and is hidden. you earned a sub !

[@timmytomy5466]

Thank you so much sir...I recovered my laptop from BCD error

[@victorabelardopalmaespinoz6727]

X:\Sources>bootrec /fixmbr La operación se completó correctamente. X:\Sources>bootrec /fixboot La operación se completó correctamente. X:\Sources>bcdedit /export c:\bcdbackup Error de la operación de exportación de almacén. No se puede encontrar el dispositivo de sistema solicitado. X:\Sources>bootrec /rebuild bcd Examinando todos los discos en busca de instalaciones de Windows. Espere, esta operación puede tardar unos minutos... Instalaciones de Windows examinadas correctamente. Total de instalaciones de Windows identificadas: 1 D:\Windows [1] ¿Desea agregar la instalación a la lista de arranque? Si(S)/No (N)/Todo(t):s No se puede encontrar el dispositivo de sistema solicitado. x:\Sources>

[@ThatGeekDude]

Did this to my windows 10 virtual pinball cabinet. Saved me a bunch of work, thanks a lot 🙂👍

[@vgbcp3rs0na41]

So it works for Windows 10?

[@ThatGeekDude]

Yes it did for me 👍

[@Arejayy8]

Last command wouldnt work for me.

[@NXRSN]

Thank you! It works! I wish you good luck!

[@samfalcon8496]

Your video always always helps. This process works for windows 10?

[@kiendatnguyen2702]

I have the same question too. I used to have this error on windows 10.

[@thallan]

I had no faith in this video. I was wrong. This is what finally saved me from having to buy an m.2 usb enclosure.

[@ChowKnives]

I will have to remember this one. This worked so well!

[@sergiogamarra7793]

this fix my issue, thx for sharing.

[@rdfiedler]

Worked perfectly! Thanks

[@danielemanuelenache]

Big thanks, you saved my day. :)

[@AftersalesService]

thank you bro, I appreciate , I used your instructions

[@alviannnursidiq8716]

100% work. Thank you very much😭😭😭

[@serhat.serbes]

Hello my friend, I like watching your videos. What program do you use for audio translation?

[@Matthew_951]

Thank you I was struggling to fix this by myself

[@surajitmaji8888]

Thanks sir it's very helpful tricks for us. 🙂

[@NETVN82]

Most welcome

[@vishalmahato8954]

bro 😮 img , i just fixed my boot . Thanks for this awesome and working tutorial

[@NETVN82]

You're welcome!

[@rm7224]

Thanks for your useful videos

[@NETVN82]

So nice of you

[@msspowerman]

tq boss.. i have solved my problem

[@karan81919]

Bro i am getting a error in the end of command prompt

[@innerspace7732]

I loooveee you man you fixed my problem 🖤🖤🖤

[@NETVN82]

Glad to hear

[@odedtzafrir1347]

@@NETVN82​⁠​⁠I chose volume 5 with the letter E which was labelled UEFI__NTFS , Fs was FAT, Type was Removable, Size was 1039 KB, and Status was Healthy. Does it have to be Fat32? I chose Fat. Volume 1 has letter C, Label is System Rese, NTFS, Partition, 500 MB, and is Healthy. Should I pick that one if all else fails? Also does it HAVE to be a partition, have 100 megabytes or more AND be FAT32? Also which drive needs to be made FAT32 and be a partition? Can I turn off my computer if I’m stuck and try another day?

[@8me8dio11]

All respect ⭐

[@hoangsonnguyen347]

I have a little question that shall we rename the volume M back to blank as the original state or not?

[@Crazy--Clown]

Very good video, be careful of chinese viruss

[@mostofazaman5292]

Thank You so much.

[@rhotech3957]

I get Failure when attempting to copy boot files

[@sudhirsingh6379]

Is your problem solved? I’m facing the same too

[@ThatGeekDude]

I had the same at first, you need to be sure that you copy them to the correct drive, the one that contains your windows folder.

[@odedtzafrir1347]

⁠@@ThatGeekDudeI chose volume 5 with the letter E which was labelled UEFI__NTFS , Fs was FAT, Type was Removable, Size was 1039 KB, and Status was Healthy. Does it have to be Fat32? I chose Fat. Volume 1 has letter C, Label is System Rese, NTFS, Partition, 500 MB, and is Healthy. Should I pick that one if all else fails? Also does it HAVE to be a partition, have 100 megabytes or more AND be FAT32? Also which drive needs to be made FAT32 and be a partition? Can I turn off my computer if I’m stuck and try another day?

[@odedtzafrir1347]

Does it have to be Fat32? I chose Fat

[@odedtzafrir1347]

@@ThatGeekDudeVolume 1 has letter C, Label is System Rese, NTFS, Partition, 500 MB, and is Healthy. Should I pick that one if all else fails?

[@embahgenduuuut]

First of all, thank you. It worked out well on my client (windows 11 lenovo) I just switch the boot to a FAT32 volume that available. But why must fat32? What happen if i switch to other uefi or ntfs volume? (cause both of them also available in my client laptop)

[@waelhassan1792]

Thank you very much 🙏🙏🙏🙏

[@vanchi9044]

Thật ra không cần một file ISO cài Windows mới hoàn chỉnh cũng có thể tạo được một USB có khả năng khởi động vào cmd như vậy. Nhưng có vẻ cách này dễ hơn cho người mới bắt đầu tìm hiểu.

[@NETVN82]

cảm ơn bạn nhé

[@islamiclifeandearth]

great video bro thank you

[@NETVN82]

No problem 👍

[@daichanlulu1108]

excellent job.

[@NETVN82]

Thank you! Cheers!

[@canalkurtz827]

Pica ta? Entre vários bootrec /fixboot só esse conteudinho conseguiu me ajudar ❤❤❤❤

[@obitotv3727]

Muito obrigado ajudou muito velho muito obrigado

[@ElAlejandro_120]

Yo tengo el problema que yo al querer prender el PC con el pendrive con Windows 10 me da el mismo error y ya configure la BIOS y todo alguna solución?

[@harishankarkharsel]

After used this method, after 48hrs later new issue arise ..screen showing blue color with ---- mark total screen

[@cocosloan3748]

👍👍

[@salamit-jm8su]

works peterfectly.TQ

[@adenilsoncosta6810]

friend where is the video that shows activating windows 10. I searched and didn't find

[@linuxxxunil]

How do I do this when the hiren’s boot usb drive is missing the bcd file or it’s corrupt ?

[@canalkurtz827]

Agora como q eu faço o dualboot do meu debian q não reconhece quando eu seleciono na bios?

[@Mysinismikako]

The last command before exit is taking too much time, is this normal?

[@Martin-ot7xj]

thankyou , please make a tutorial for legacy mode as well !!

[@NETVN82]

Ok coming soon

[@alvaro.a9814]

Thank U so much

[@NETVN82]

Most welcome

[@Calocreview81]

Bạn chia sẻ video rất hay hữu ích

[@ilsonveiga8855]

It din't work for me.

[@khushalsapariya9304]

Hi Sir Please make video on how to integrate Office 2016 into windows 10 22h2 ISO?

[@adenilsoncosta6810]

does it work for windows 10 version?

[@jorgeerickhuamaninga2468]

Gracias ... superheroe sin capa

[@nixonone2031]

great video

[@NETVN82]

Thanks!

[@syedikramullah1114]

Amazing

[@NETVN82]

Thanks

[@siddharthmore9096]

If I do install will it harm pc

[@wisemastertechnology8318]

i need your help for truenas

[@spiceworks3577]

Hello Sir, May you please make a tutorial on how to setup Orange HRM Human Resource Management, in ubuntu 20.04. New Subscriber here. Thank you

[@حسام_عطايا]

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ لا استطيع وصف حبي لك ❤❤❤❤❤

[@anshulrawal6476]

Failure when attempting to copy boot files

[@sudhirsingh6379]

Bro did you solve that problem? I’m facing the same now

[@odedtzafrir1347]

When I clicked exit it didn’t boot me back to the page that said continue to windows. Then I switched off the computer and removed the USB. It didn’t tell me to continue to windows. Just troubleshoot and switch off PC. What do I do next if I don’t see the Continue option once I did everything as you said? I also changed the C drive in the windows one to F and boot files installed successfully. But when I exited, the continue option wasn’t there. I’m using the MBR method. In this video. kzbin.info/www/bejne/nWKze62FZtyNiNUsi=OvQCoouB-Rwn93Ls

[@thang3342]

quá hay, anh có thể cho biết do đâu bị lỗi này ạ? Thanks

[@NETVN82]

cảm ơn bạn đã xem, do bị mất tệp BCD

[@Mysinismikako]

​@@NETVN82 what causes that file to get lost