How to fix Bootloop on LG V10 / G4 & prevent it happen again

[@swieric]

I have collected three LG V10's that over the years have suffered this boot loop issue. I had forgotten about two of them until it recently happened to my wife's phone. I successfully revived all three phones and all tests look good. Now I have to figure out what to do with them. THANK YOU SO MUCH!!!!

[@gadogamix]

Glad it work for you 😊

[@kcninjaneer4671]

Thank you SO much for the tutorial! I was able to get it fixed on the first run. Also added the heat sink to make sure it stayed cool while the data was being transferred. Worked perfectly, all data saved!! Gonna keep the V10 as a backup phone

[@muhammadsyarifhidayath7619]

How's the phone doing now? Is it still on?

[@chiefdenis]

​@@muhammadsyarifhidayath7619curious also, im about to do this on my old v10, i need a spare phone

[@Shakezo_727]

Just booted up my v10 for the first time in many months. So glad this video was recommended to me, thank you!

[@senjakbeograd8502]

Is it still working, as many ppl reported it fixes for just a couple of days?

[@LuisGonzalez-bu4pz]

I have an LG V10, it died on August of last year, after a few months I decided to revive it and bought a new mainboard and immediately installed the copper heatsink, but i replaced the thermal pad with actual thermal paste, works like a charm, no more overheating, and this thing flies, for a 2015 phone, this is still amazing, it's such a shame that such a good phone is prone to this issue though, gonna upgrade to V40 asap :) thx for making this video, it saved my phone

[@gadogamix]

I Agree, this phone is amazing (minus this issue). Thank you for sharing your story with us 😀

[@ИванБотев-ч3р]

I tried this on my LG V10 and working. I'm so impressed. Thank you man.

[@gadogamix]

You're welcome friend 🙂👍

[@silenttd3829]

Has it happened again?

[@ichiiliev798]

Вярно ли стана, и V10 or G4 ли ти smartphone?!?

[@PhantasmXYZ]

As a previous owner of three different G Flex 2 units, I can say they are extremely prone to bootloop. Many show up on eBay with this issue and many reports are on forums like XDA and Reddit. However, the media and even lawsuits never seem to cover this phone as part of the LG bootloop discussion. It is likely due to so few users after all the bad Snapdragon 810 news that it runs hot and thermal throttles often. That very issue combined with the poor LG manufacturing quality (G Flex 2 was made around same time as the G4/V10 and inside layout is very similar) make GF2 units exceptionally vulnerable to bootlooping. Fortunately the heatsink mod in this video can help reduce bootloop risk. Sometimes a battery swap is needed as well.

[@ISolGamess]

I used thermal paste por pc and the copper paper and the temps drops 10°C. worth the risk if you apply it properly and isolate the circuits around with tape

[@retinapoliyn7462]

You Saved my life, Thank you so much. I repaired my phone by myself. If your phone Stuck on Logo Please repeat Heater Steps. -------------------------------------------------------------------------------------------------------------------------- Your Videos are AWESOME.

[@gadogamix]

I'm glad it work for you 😊 I suggest you immediately backup important data because we can't tell for sure how bad the damage is and when the bootloop happen again. I think i'm lucky enough that since this video uploaded till today, my phone still working fine (for proof, you can see my recently uploaded video is about this phone (LG V10) review).

[@VoloKinProject]

How much horsepower is that engine?

[@gadogamix]

about a half HP 😁

[@cyberpilot6512]

VoloKin Project - its a fully worked V10 with overhead cams and quad SCU's on each cylinder, fully sick extractors and a beefy rear end.

[@Rrazzaqkhhan]

@@cyberpilot6512 How are you friends I am you this set problems you battery problems u c t u storage problems you please xxvi video coming is this WhatsApp numbers 03 43 56 98 786 Razzak Khan

[@Rrazzaqkhhan]

MD using LG 10 v 10 you this problems batteries please applications battery backup you please send me you this WhatsApp numbers 0343 5698 786 Razzak Khan

[@mustaphab.1190]

Thanks for the video. I'll give a try to my old bootlooped v10 resting in the drawer for months

[@rajanr819]

Hi! Have you tried it?

[@mustaphab.1190]

Rajan R not yet mate, will post the result here as soon as I do

[@AvgSize]

Someone is selling a v10 for $15 in my area because it has bootloop

[@AjayKumar-ms3zl]

have you tried it brother ?

[@mustaphab.1190]

@@AjayKumar-ms3zl don't have time mate, sorry not yet

[@AChaoticImagination]

Thanks for explaining it in detail, worked for me and everything is backed up!

[@gadogamix]

Glad it work for you friend

[@senjakbeograd8502]

Is it still working, as many ppl reported it fixes for just a couple of days?

[@Ibelieve218]

I have 2 v10(vs990) both have a boot problem and I got my hot air rework station out set the temp at 300c and set the air flow at 1 and timed it at 1 min. I don't think it was to long of a time it took 3 tries . both phones are fully working now I just thought I would share the temp and air settings Thank you

[@gadogamix]

Thank you for the info! 👍

[@cyberpilot6512]

Neal Jones - thanks, I took it to 220c but the fix didnt last - was hesitant to push higher but will now take to 300c - got nothing to loose...

[@lanitcohen8024]

Anyone fix phones v10 with this issue dont have the time do it

[@JMXCzw]

How long did the fix last?

[@springer-qb4dv]

@@cyberpilot6512 Yes 220c is too low to melt crap unleaded solder used by LG. Need to push 300C to get it to flow. It's only temporary fix, and will bootloop again, unless you desolder the ram chip and replace lead free solder with good leaded solder.

[@mikejaques4702]

huge thank you for this video and helping people out with their LG Bootloop and overheat problems. Like from me!

[@wildweedle6012]

Will never buy another LG product after my experience with this POS phone.

[@ericm6803]

Eric Maher same

[@DjamLDzGamerDjo]

Lg g6 fixed all problems

[@MagicGuitara]

@@DjamLDzGamerDjo but it`s to late!

[@DjuroGazdic]

Same, gflex 2 and nexus 5x...

[@delusion-1375]

@@DjuroGazdic i had a g flex 2 same problem

[@sonichog]

Thank you so much for the tutorial! I did this and it worked!

[@scellyyt]

My friend's lg V10 had this problem and this helped him :D

[@gadogamix]

Really? Glad it work for him 🙂

[@senjakbeograd8502]

Is it still working, as many ppl reported it fixes for just a couple of days?

[@globalwarmingisreal311]

Great video! Can i use a 0.5 thermal pad instead?

[@citotchannel8746]

Great video bro..keep it up bro!!

[@adolphweissman5973]

sir good day, 3:46 what kind of tape you put on the board? I hope you could reply or remember this one because i badly need to this one for my client.

[@gadogamix]

Just normal transparent tape to prevent the board touching the metal part (to prevent short circuit). you can use electrical tape.

[@007harith1]

If I only knew I've been holding a engine this whole time, ....i would have tuned it

[@SameBrittDifferentDay]

I'm not doing all this. LG gets no more of my time or money

[@mickysingh2948]

Yeah you are right lgv10 is too much costly

[@springer-qb4dv]

Just heating LG G4 is useless as it will bootloop again soon. But it works on LG G3 though.

[@PinataOblongata]

Instead of thermal tape it'd probably be better to use thermal paste used between PC CPUs and heatsinks, like Arctic Silver. Can be a little messy, but would probably give slightly better thermal conductivity.

[@gadogamix]

I already try to use thermal paste and with no thermal paste and it makes no different. Currently I'm not using thermal paste

[@32bezimienny]

thanks man it works!

[@gadogamix]

Glad it helped

[@nowik4m]

thank you very much, V 10 back to life :)

[@gadogamix]

I'm glad it work for you :)

[@dubstackz]

What temp does the CPU need to be heated to, so the solder can liquefy properly?

[@TheFlashback562]

For anyone wonder if this works I can confirm that it does however results may vary. In my experience of trying to revive the v10 (of which I have tried a few of the DIY methods) this one feels like the one that has the best chance of success. However my v10 lasted for about 24 hours after reviving it via this method opposed to the 20 minutes I got from just firing the whole motherboard in the oven. If you're in a position where you need to get something important out of your phone like say a contact then save yourself the efforts and fling it in the oven but if it's more transferring photos and other media that takes a while then this is definitely your best shot. I was able to move a few gb worth or data, browse YT for a while and then the next day my gf was testing it by playing candy crush on it and that's when it started looping again. Realistically I could probably heat up the cpu again and try to refix the solder but honestly I think it's just a patch on a sinking ship and I wouldn't advise people to try this if they are expecting to get even a few months outta their phone. Still great video, and all the best to anyone attempting it.

[@gadogamix]

Thanks for your information. I totally agree with you, results may vary, it depends how bad the damage is

[@GlakeGG]

What temp did you set your oven to? And for how long did you let it warm? I honestly think I'm going to just do the oven route. lol

[@TheFlashback562]

@@GlakeGG lol yeah man. It was a while ago, I saw a vid on yt about doing it. If I remember rightly then it was about 180 degrees and for around 5 minutes. Make sure to preheat your oven lol.

[@springer-qb4dv]

Reflowing ram/cpu stack is only temporary fix for LG G4/V10. Good for saving data from phone, but that's about it. Only permanent fix is to desolder ram chip, replace crap lead free solder with good leaded solder

[@doggelixr3971]

What kind of Tape do you use?

[@willparks6139]

MY G4 is partially bootlooping going to try this

[@fetB]

so did it work?

[@arsenalfan7511]

Lg is the worst. I have never had this problem with any other brand phone. But all lg brand seems to have this problem. Yet the company do nothing about it

[@sammysams8513]

@@turkishultranationalist my g5 died I have used just a year. I sent to technician but didn't fix it

[@Makdives]

Unhelpful way another method on another channel much better with the liquid heat sink worked well for me now 7 months no problems at all thank to Android Egypt One method.

[@SilentSinnerInScarlet]

I have a strange issue with an LG Stylo 2 Plus handed down to me from an aunt. What happens is: sometimes when the phone overheats, the phone shuts down and refuses to reboot beyond the LG logo unless I first plug it into a USB charger. This happens to me at various battery charge levels depending on how continuously I use the phone: when I use it sparingly or moderately (with phone breaks in between), I get down to about 23% charge before the phone turns off; when I make heavy use of it, then the shutdown happens somewhere between 40% & 50% levels; and even once this shutdown happened to me earlier at 57% while using the camera. And everytime this issue happens to me, the CPU area feels abnormally hot and refuses to either turn back on or boot up beyond the LG logo, but inexplicably, when I immediately plug it into a USB charger or computer (with the CPU still feeling abnormally hot), the phone boots up normally and even reaches the home screen (with that CPU still hot!). What do you think could be going on with my Stylo 2 Plus?

[@gadogamix]

I think is a battery (or battery connector) problem.

[@gadogamix]

@Danlerie Montoya One thing for sure, if it gets really hot, you should turn it off first then wait it too cool down and hope there is no damage.

[@SilentSinnerInScarlet]

@Danlerie Montoya Tried it and in 99% of the time it doesn’t help. Only plugging it to USB power will wake it up again, no matter how long I wait for it to cool down. But it doesn’t matter anymore - I replaced the battery and it seems the problem vanished. And I smelled the other battery and it smelled toxic. No good, must recycle it soon!

[@اكرمالعسيري]

I want to buy lg v10 what is your advice And what is the thing that is placed on the processor

[@gadogamix]

Do you have a plan to use it for a long time? If yes, I suggest you to buy another phone.

[@mari0.mp4]

i have the same problem on my s6 edge (stuck on logo), can i use this method to fix the phone?

[@gadogamix]

I think is different. You may try to flash the firmware first as in most cases, it's only a software problem.

[@JMXCzw]

Nice video. Is this a long term fix though?

[@gadogamix]

It depends on how bad the damage is. Mine working fine for a couple of months.

[@springer-qb4dv]

No it's not long term fix. The reason is that LG used crap lead free solder in LG G4/V10 which caused bootloop issue, and it will fail again. Only permanently fix is to desolder the ram chip and resolder with good lead solder.

[@JMXCzw]

@@springer-qb4dv Im no that tech savvy. Might have to shelf this one. lol

[@okokok3600]

Guys must understand this way only for phones nit yet have bootloader problems

[@maxbaranchuk3269]

It worked thanks for everything I fixed it by my self and I’m 13

[@pathankhan4433]

it worked for me three times..it worked each time for a month or more..but i did not use copper plate...my mistake....it works just prevent it from overheating ..

[@NinhDang8777]

Try this way.100% successfully

[@GheicoGerman]

Some hours more...but the phone will die anyway!

[@steal0ed]

Gheico German that's my man, it is inevitable and it will bootloop the very next day or the day after but it never fixes

[@aNewJesus]

More of a data recovery method than a repair.

[@azazzelx]

works great as a temp solution tho...

[@ipnorospo38]

Worked great for me, at first try. I blowed air on cpu 3 times: 2min. - 1min. - 1min. (with a pause between the heatings). Then I put two layers of excellent thermal pad (17W/mK) bought on FrozenCpu.com Many thanks for the video!

[@gadogamix]

Thanks for your report :)

[@dxk2007]

I didn't realize I need a degree in Electrical / Computer Engineering.

[@kamilabanu.s3529]

While turn on my lg v10 the screen was blinking and also have bootloop did there is any solution for this

[@elmaliboo4124]

It works thank you

[@mikescott29]

does your phone still works?

[@valerybasay6916]

Hello dude! Gps work fine after copper mode?

[@gadogamix]

Mine is working normal

[@valerybasay6916]

@@gadogamix thg bro But im read about problem with gps after cooper mod.

[@lordanrebojajr1662]

bro i removed the heat pad the white square foam over the phone frame,, what is the best alternative for that... i dont know what to do about that

[@JMXCzw]

I did this now my v10 keeps freezing and restarting. Boots back into system repeatedly works for a few minutes and sometimes for hours. The phone is not over heating... Could this be a software issue? I have no audio on the loud speaker and the test codes are not working. Model H900 running Android 6.0 At&T

[@gadogamix]

For V10 I can't say for sure. Usually it's because hardware issue. But there's still a possibility it's because software issue

[@JMXCzw]

@@gadogamix thank you Gadoga... I'll try once more. And flash firmware... I'm not sure if buying a motherboard on AliExpress is a good idea...

[@guitarmage0072]

Could you use aluminum tape?

[@gadogamix]

I think its better than none

[@cheekspanker]

Can i use the normal double side tape?

[@gadogamix]

Not recommended

[@spidert6665]

how long does it work? some say it just lets you recover your data... please i need answer; thanks; great video

[@gadogamix]

Still working until today :)

[@ammaraboarshed7818]

Where I can buy this items

[@Ibelieve218]

I have a hot air station what the setting on temp for the hot air station

[@gadogamix]

I can't answer for sure. Some people able to revive their phone only using hair dryer, some others work by using iron, some with heat gun. If you use hot air station, I suggest set at 360 degree, low air flow, and try for 5 seconds only. If it still fail, try longer time, but for safety reason, do not exceed 10 seconds. The solder will melt at approximately 20 seconds.

[@jhonalexdelgado2456]

You’re great.

[@raharjopramono4906]

I had g5 at&t,always restart in much time and sometimes the phone too hot. Can your method work in my g5? Sory for my english...

[@gadogamix]

I'm not sure if G5 also have this kind of problem. My first suggestion is try to re-flash firmware and we hope it's only a software problem

[@BigBossYounus]

Thanks bro Can u make a video for lg g4 plz

[@gadogamix]

Sorry friend, I don't own LG G4, so I can't make a video about it, but the method is pretty much same, just different in how to tear down the phone.

[@lgrsi]

The electrical tape method worked for my sister's V10 but the screen now has a subtle little burn mark right where I set the fix. Also the top screen (second screen) started to leak the backlight a little bit. Still, she got a working phone from her drawer again. She said she will never buy an LG phone again.

[@gadogamix]

At least you can back up important data (if any).

[@jemjemcuevas8439]

may ask you something sir how about the lg v10 totally black out no power can i apply the sam procedure sir.... pls.. help tnx a lot god bless...

[@gadogamix]

I think that is a different problem friend. I think it won't work using this method, but you may try it if you feel nothing to loose. Before that, make sure the battery is properly charged before try anything, sometimes the problem is just the battery.

[@goyocossio2293]

Hi!! It worked for me. But on third day the V10 back to bootloop problem (this happened 3 times). Any sugestions?

[@gadogamix]

Well, it all depends on how bad the damage is. Some people only last for few hours, some others (like me) can last for months. I don't other better way than repeat the same steps.

[@mahsahasani2603]

Hello There is a way to test the IC؟ How much temperature and how much wind time the device will damage the IC؟

[@gadogamix]

I'm not technician so I don't know how to test the IC. For the temperature, you can search on the comment in this video, some other people already mention the temperature that works for them.

[@88ights]

I'll do a a challenge and do It for my LG GFlex 2. I'll tell you how it goes.

[@antionepettyNYbigboi1]

any luck??

[@88ights]

antione petty I haven't bought the supplies yet but I'm definitely doing this

[@gadogamix]

We'll wait for the result. And please write the result in a new comment, it is easier to spot. If you make a video about it, you can share it here. Thanks friend 🙂

[@antionepettyNYbigboi1]

its worked for me .. but now i have 2 lines from screen.. but it worked enough for to get files off of it... hair dryer worked did it for 2 min and pressed down.. still working.. but like i said.. screen messed up..

[@gadogamix]

Thank's bro for the update

[@AlbertoPerez-nw9sr]

someone to tell me what is the thermal tape used in the video or something similar? thanks

[@gadogamix]

Well... it's a thermal tape. If I want to buy it online, I just type "buy thermal tape" and it appears. We just need to pick the right thickness.

[@khalideltaweel7705]

My LG G4 did bootloop and I try to fix it by some ways but it fails then it turns off and doesn't turn on again but when I connect charger to it it charges battery It is a bootloop? Or a problem with power ic and bootloop together

[@gadogamix]

Are you already try to turn on the phone while connected to charger? Maybe the battery is too low to start your phone, try to charge it first for around 30 minutes, then try to turn it on again.

[@dXabonador0075]

yes same here issued to my wife's G4..the bootloop starts when she using data for internet and she always experience since then..but i bought a new battery (please bought genuine or a high quality replacement battery) and the bootloop problem gone!

[@demonxelloss]

I have the freeze boot screen, so i'll try your cooling method I'll give you my result ;)

[@gadogamix]

My finger crossed :)

[@demonxelloss]

Thanks, @@gadogamix ^^ Here is my results : - Using micro-heatgun on CPU, good way, the phone turn on and full acces But... butbutbut, i must place the sim inside, so, turn off, and... green screen of death again Re-heating with the micro-heatgun, and... one correct boot and... freeze in menus (gasp !) So, i'll use my micro-oven, with this method, i will be sure the heat will go everywhere (i think not only the CPU is mad :P ) The main goal is to keep my datas in the inside-flash memory (contacts and GPS points in priority), so next good stard, i'll not touch even if sim is out :P Even if the phone is completly fix, i'll consider it as dead (Its new function, camera or for peices ;) ) and i think a Trekker-X4 will be my new machine ^^ So, to be continued ;)

[@gadogamix]

Thanks for the update :)

[@gadogamix]

Ha ha you make me smile bro 😁

[@techworld7751]

Please also do on the lg flex 2

[@gadogamix]

I'm sorry I don't own LG Flex 2 so I don't know how to do it

[@geekoussema]

my lg g3 keep restarting ! i replace the battery and now the phone stuck on lg logo or boot screen for 2 to 3 minutes then automatically get restarted by itself ! does this is a software issue or hardware ! should i try to repair it or buying a new phone ? and thanks

[@gadogamix]

Try to flash the firmware first. I hope it's only a software issue. If you have spare time and want to learn something, try to repair it first of course. Buy a new phone after you try to fix it and failed. However, if money it's not a problem for you, then I think buying a new phone it's better choice, LG G3 is pretty old right now and you can get better phone with quite affordable price nowadays. You can use your precious time to do other things than fixing your phone. So, it's your call

[@geekoussema]

Gadoga-En thank youu

[@VeCtOrOrAnGe]

OUS3MA Reheat the CPU , Memory chip. It can fix.

[@BalkanRepair]

The BEST!!!!

[@sabermaamri692]

Does lg g5 have the same problem as bootloop and fix it like lg v10 ... i want to buy lg g5 but i'm afraid of this problem .. and the likelihood of it happening is bigger lg g5 or lg v10

[@gadogamix]

Any smartphone from any brand and type might experience bootlooping because of various cause, but for LG G5, I think there is no common issue (massive issue) with the bootloop. So I think you don't have to worry about bootloop issue on G5.

[@rashlees]

G5 is good but ive heard some sensor issue between the battery and phone detachment all the time, try xiaomi a1 or g6 for smooth experience or maybe a v30

[@NinhDang8777]

Verry good

[@crackit50]

This could help with phone heating?I mean will not get so hot after a period of time of using it

[@gadogamix]

Your phone (for example the screen) will feel hotter because the heat from CPU will transferred to other phone parts. However, the CPU temperature will be cooler. It will help a little but don't expect great difference.

[@mrivy1651]

How can I contact you for service? I have this problem.

[@gadogamix]

I'm sorry I don't open a service shop and I don't have a courage to do it on other people phones. The reason why I brave enough to do it on my own phone is because I'm ready for the worst case scenario and thankfully it works on my case.

[@FoxBlaze55]

This could work on a bootloop nexus 5x?

[@gadogamix]

First of all, try to flash the firmware first. Most of bootloop issue are only software problem. If still not working, you may try this method.

[@valentinvalet2916]

What about the 5x?

[@benbruder]

^^^^^yeah^^^^^ (Typed on Nexus 5x)

[@aaqibhussein5245]

How to fix this problem on nexus 5

[@gadogamix]

For Nexus 5, probably is only a software problem, you just have to re flash the firmware

[@benbruder]

@@gadogamix No, it is a hardware issue, but XDA has a fix (Typed on restored Nexus 5x)

[@raghvendramishra2248]

Help me about bootloop issues in V10

[@somenbasak8359]

The only way to prevent bootloop is just avoid buying LG phones.🤣🤣🤣

[@gadogamix]

😅 But for newer LG phones, they don't experience this problem anymore.

[@jordonbrown6851]

Real talk

[@springer-qb4dv]

LG phones were good up to LG G3. Then LG started using crap lead free solder which caused LG G4/V10 bootloop epidemic.

[@toml3530]

Yes lesson leant and never buy LG phone since.

[@alvinjr.soriano4109]

How long it will last?

[@gadogamix]

It depends on how bad the "damage". Some people only last less than a day, mine work ok for several months then it dies for another cause and I haven't try to resurrect it again.

[@noof666]

I have lg v10. It doesnt turn on. ,i try to reheat the cpu and emmc then i try to on then it boots up. But the problem is after 20-40 minutes of using it shutsdown again and never turn on. Then i reheat again for the second time then turns on. What is the problem of this?

[@gadogamix]

The problem is as I mention in the video. It might because of bad solder. To really fix it permanently, I think we need to reballing the CPU and eMMC, but I bet 95% service center can't do reballing CPU. Only a few highly skilled electrician can do reballing phone CPU on their own.

[@springer-qb4dv]

@@gadogamix It's actually ram chip and cpu sitting on top of one another. Ram chip is easier to desolder and reball than cpu which has many more connections. Just reballing ram chip can fis many bootloop issues.

[@pranksmaster858]

Hey bro i had up my mobile vereion to marshmallow but its hang when i open cant even work for 5 sec can u tell me how i can make its version to lollipop again pls answer

[@gadogamix]

I never try to flash any firmware in this phone so I'm sorry I don't know how to do it. But one thing for sure, it's a different problem than shown in this video. Yours is a software problem, so you can't fix it with method in this video. Maybe you can try to find an answer through this forum: forum.xda-developers.com/lg-v10

[@shilings9741]

Can I use this method on nexus 5

[@gadogamix]

If you experience bootloop issue on Nexus 5, I think it's only a software issue and you don't need to do this. Just try to reflash the firmware (software).

[@paradisaemusa3281]

It's permanent..? Or just give the time for backup data...? How long this can be used..?

[@gadogamix]

It depends on how severe the damage. For me, my phone still working fine till today.

[@jofanbastiantoro8265]

what song in video?

[@gadogamix]

Track: Killabyte - Wicked Ways (feat. Danyka Nadeau) [NCS Release] Music provided by NoCopyrightSounds. Watch: kzbin.info/www/bejne/gXTTgnV4Z5eLrcU Free Download / Stream: ncs.io/WickedWaysYO (It's in video description)

[@rosekreuze]

funny mine was stuck in "life is good" and no longer boot past that. few months later it wont boot anymore just black screen even charging animation no longer shows up.

[@samibakhtiar6866]

Can this work on LG G4 dead due to software issue?

[@gadogamix]

It's a different case. I suggest you to try flashing the firmware first. If it is a software issue, your phone will be fine after flashing firmware.

[@ColettaHughes]

Why does everyone have to include the very unneeded music :(

[@gadogamix]

Because some other people said that I should put music on my video 😅 Maybe you can silent the video and read subtitle only. There's a chance you don't understand my words anyway (because of my accent) lol 😁

[@ColettaHughes]

@@gadogamix, Very sad these kids need (elevator music) to keep their attention... Isn't learning enough anymore, or are their minds that far gone??

[@lovelamp]

The music wrecks this entire video

[@ColettaHughes]

Don't bother with this if you can prove your "NEW" purchase of the LG V10. LG is still repairing the V10 under recall warranty... That's right, the phone is basically still under a recall warranty. Just got mine fixed for free May 22, 2019.

[@voodoomotion5855]

Hi, i'm based in UK, is LG still doing this in July 2019?

[@voodoomotion5855]

My phone has only just started the boot loop problem and i'm desperate to retrieve my data because it contain photos of my children. appreciate your advice, best wishes

[@hudanehudan]

Will it work using 0.3 mm copper plate?

[@hudanehudan]

I already bought the 0.3 mm plate, and a copper tape, i also Bought a thermal paste, should i use the thermal paste too?

[@gadogamix]

0.3mm should be no problem. But maybe you can use only one or two layer of it (it also depends on how thick is your tape). For thermal paste, you can use it just a little bit if you want. Honestly I also already tried using thermal paste and I can't find different between use thermal paste and without using it. But since you already bought it, you can try to use it, theoretically it's better if you use thermal paste. However, before you apply thermal paste, try to close the cover first to make sure you still can close the cover (not overly thick), because it will be quite messy after you apply thermal paste (I already experience that 🙂)

[@hudanehudan]

This is the specification of copper that i've bought Specs Width : 50mm Length: 1 Meter Material: CU 99.98% Thickness : 0.065 +/- 2% colloidal components: conductive adhesive to the outside (thermal response acrylic adhesive) adhesion: 1.5 ~ 1.3kg / 25mm temperature resistance -10 --- 120 intensity 4.5 ~ 4.8kg / mm elongation 7- 7% to 3-4%

[@gadogamix]

I think it should be fine

[@yktam007]

A piece of copper to evaporate, enough?

[@shimon2476]

This is not a permanent fix once your phone starts doing this its just a matter of time before the reflowing copper plates etc stop working.

[@TruongLe-du6qs]

Cái miếng dán do làm tu vat liệu gi vay

[@khangluis999]

Truong Le chắc bằng đồng á bạn

[@NguyenThang-kc2db]

Có chức năng tản nhiệt bạn à

[@The_Phone_Bin_Diver]

I think you accidentally mixed up your phone disassembly guide with your car engine disassembly guide

[@ec1021501]

I apply similar fix on my G4s, but none of my tries least more than a day until it fail to boot again. so I gave up.

[@tiffanyhusar9043]

how do you get the cover off the CPU on a V20?

[@gadogamix]

I don't own V20, so I'm sorry I can't help you. Anybody else have an idea?

[@Leonvolt28]

I've pulled a small screwdriver Under it to carefully lift it up. That was on an lg g4.

[@benbruder]

*Does? This? Work? With? Nexus? 5X?*

[@gadogamix]

Maybe. But for 5X, usually is only a software issue. you just need to re-flash it. Just Google it: Nexus 5X bootloop or unbrick nexus 5x. So, my suggestion is, try to flash firmware first, if no avail, you may try to do like in this video if you willing to take the risk. Here's a video (not mine) about 5x: kzbin.info/www/bejne/iXWVZqCap8x0r9U

[@JoseMartinez-dj5cp]

Is still working?

[@gadogamix]

Still working till today

[@didahassanhassan687]

I have my L g v 10 problems. I need someone to fix for me. Plz I need help

[@mehmetakgul9971]

Cold soldering, ram, without revising the CPU, the problem will repeat.

[@edwardgithinji8805]

And it's how much

[@edwardgithinji8805]

I need the price

[@farazanwar7155]

This process is temporary or permanent?

[@farazanwar7155]

Plz tell me as soon as possible

[@gadogamix]

In my case is permanent (at least until today my phone still works fine). However there are many others people said it's only temporary. But at least they have enough time to backup data.

[@doggelixr3971]

02:24

[@antionepettyNYbigboi1]

yes i did