Great video, just the information I've been looking for!
@InfinityDrones3 жыл бұрын
Awesome! So happy I could help. Hope some of my other videos can help you too.
@lammybdrone55813 жыл бұрын
Very useful info for drone owners, thanks for sharing 👍
@InfinityDrones3 жыл бұрын
Glad you found it useful! Thanks for kind words.
@dereshpillay9302 ай бұрын
Great video, had a crash recently and have replaced video feed cable and nimble control cable. could not calibrate compass at all after replacement of cables. managed to get my hands on a demagnetiser, followed the steps in the video and all sorted with compass calibration. is there any advise you can offer on "image transmission error" 0x800000. No video feed and memory card is also not recognised. gimbal status also says disconnected however gimbal is on and centred. Please help if you can. thanks
@InfinityDrones2 ай бұрын
That error is sadly a damaged core board error... the way I know is that you're saying the memory card is not recognized... that is straight on the coreboard... sorry man
@dereshpillay9302 ай бұрын
@@InfinityDrones thanks for reply, any idea if I can get a replacement scoreboard - is it worth it?
@InfinityDrones2 ай бұрын
@@dereshpillay930 ebay or aliexpress are good places to look for one.
@dereshpillay9302 ай бұрын
Thanks gonna give it a shot
@InfinityDrones2 ай бұрын
@@dereshpillay930 Fingers crossed!
@delruner3 жыл бұрын
Great tip... Thank you Any suggestions for fixing the aux/led white landing light on the MA 2. Mine stopped after a hard fall brushing a tree. I replaced the small led module ( only mounts with two small screws) not sure why it doesn’t get power? The light does not respond to the controller on off or auto settings.
@InfinityDrones3 жыл бұрын
Sorry to hear about your issue... but sounds like you'll need to send it in. Sounds like something came off..
@samil15222 жыл бұрын
Did you fix it
@gvdlaarse Жыл бұрын
Dankie man! Ek gaan dit n shot gee. My Mavic air 1 gee my altyd die probleem en het nou al gedink om maarnet te upgrade en n beter drone te koop want ek kan nie meer so aangaan nie.
@InfinityDrones Жыл бұрын
Yes man. Ek hoop dit help jou. Onthou om ook die IMU te kalibreer.
@gab_droneservicesdeltastat10672 жыл бұрын
Can I do the same in my phantom 4 pro?
@InfinityDrones2 жыл бұрын
Yes, I've done it on quite a few phantoms
@NhPete4 ай бұрын
Can i do this with a arris m900
@InfinityDrones4 ай бұрын
Worth a try, but I've not heard anyone needing to do it on the Avata 2. Did you have a bad crash?
@NhPete4 ай бұрын
@@InfinityDrones yes my son had a really bad crash him & his friends. Now it won't let me take off or do anything keep saying compasses inconsistent. ReCalibrate it then it's say something about EFK & spent crazy outta control
@InfinityDrones3 ай бұрын
@@NhPete If the calibration didnt work then you have a hardware problem, sorry man
@Sharakomusic2 жыл бұрын
Won’t that demagnetize the motors??
@InfinityDrones2 жыл бұрын
No it won't. Your motors have magnets in them and will always be magnetic. Demagnatizing can also be seen as DeGuss. Think back to old TVs that had static on them and when you moved your hand over the surface it tickled your fingers, but only did it for a short while because the energy moved from the screen to your hand. Same idea applies here. Your are just removing the magnetic engery from the place where it's not supposed to be.
@alfindo272 жыл бұрын
how if we rotate the demagnetier CW ?
@InfinityDrones2 жыл бұрын
Sorry I do not understand? What do you mean? The orientation of the demagnetizer does not matter.