thank you so much, I was going to throw it away but it now works again and you've made someone very happy
@charlesbermudez-311 Жыл бұрын
I had the same problem I just did as in your video and my problem was solved thank you very much
@evanv78926 жыл бұрын
thank you so much i thought i was gonna have to start walking again and then i came across this video and now my hoverboards working
@whomadeit21299 жыл бұрын
going to try that tomorrow. hopefully it works great video!
@lesussie29189 жыл бұрын
+Josh Eichelberger Actually most cases are due to line loosen. The worst case is control board no working, but replacing is not complicated either. You can see my other video- how to take part the scooter.
@EthenSouthon-md2ud5 ай бұрын
Thank you so much ❤❤❤
@lindavanlerberg77606 жыл бұрын
extremely helpful Fixed the problem Thank you so much!
@Nick-dp1qp8 жыл бұрын
I have this problem with my lohawk , do I need to do the same thing you did with the pen and spread the plug ?
@kasiatrepagnier57728 жыл бұрын
Thank you so much it worked perfectly I did every step and it work thank you thank you !!
@georgiaboy64267 жыл бұрын
Thank you for the video.
@oaoekii27668 жыл бұрын
Omg YESS it works thank you so much
@elduncinator63886 жыл бұрын
I'm about to go try this right now
@cemyasam5 жыл бұрын
thanks worked
@soudmamado34218 жыл бұрын
Thinks it worked
@dreloveparianos8 жыл бұрын
THANK YOU SO MUCH MY WORKS NOW YAYYY😄😃👍🏼
@SamanTvVlog6 жыл бұрын
try to calibrate your hoverboard.
@isiaahscott669 жыл бұрын
Hi I just got the board the other day and when I try to ride it wheels do not move the circle light on the left side don't come on when I stand on it also just the green battery on the right come on I have the same one any help ??????
@lesussie29188 жыл бұрын
+Isiaah Scott Firstly, full charging . If no working, it should be line loosen. Remove the back cover, check all pins, disconnect them and reconnect .
@cameroncortes11358 жыл бұрын
My two lights are on but one side is weaker or sometimes won't move what do I do is it a gryoscope or something else
@fannyso26578 жыл бұрын
Thank you!!!!
@alejandroalbertofuentesurr49978 жыл бұрын
the indicator light is green, but the wheels do not spin, it's like this in the video but without the red indicator, what it is can be?
@noorvermilya51813 жыл бұрын
all these comments from 4 years ago and i just found my 4 year old one today lol also it worked
@tankybp8 жыл бұрын
Hi Le, i also have a problem, but my red light flashes 2 times. i have check the wiring, and calibrate the device, but without success...
@gunnarH0078 жыл бұрын
+Milos Tankosic Did you find a solution ? Mine is also blinking 2 times !
@tankybp8 жыл бұрын
+Gunnar Hansen Actualy, I have send it to my friend who is doing repairs of industrial electronic equipment, and he found that one chip on the main board is broken. As he said, there are three same circuits and on that one protective diode is mounted wrong (polarity is not good). Now we need that kind of circuit, but there is not any data...
@OldSkoolF4 жыл бұрын
If you have a red flashing light on one side and it wont move and Recalibrate doesn't fix it... Check all plugs and wires are getting good connection (Especially the 5 wire sockets). If they are and it still don't move then it probly has a blown output fet on the side thats red. They're easy to change.. MAKE SURE BATTERY IS UNPLUGGED!! Measure the Mosfets, 6 on a heatsink per side(GDS)... Usually only 1 or 2 short... DMM to Diode, Neg on Center pin (Drain), Gate approx +1.5v, Source approx .5v. YST7575C crosses to RU6888R 68v 88a TO220 *** For the 12 Fet Mainboard Model, one bank of Fets controls one drive wheel. Do a continuity test to figure out what bank controls what side.. Each bank of Fets, are broken into pairs per thick drive wheel wire (YGB)..
@isiaahscott669 жыл бұрын
Red light keep flashing on the motherboard any solution???
@ivanjimenez15117 жыл бұрын
Isiaah Scott that is what mine is doing . did you figure it out?
@gemmasparrow55417 жыл бұрын
Isiaah Scott
@aerigeeag8 жыл бұрын
Could touching the wires possibly make it blow up ?
@lesussie29188 жыл бұрын
+Aerial Green Turn off the hoverboard at first. Or disconnect the power line near the battery.
@crisramos48189 жыл бұрын
I have the same problem but my hoverboard is the one with Bluetooth and lights on the top of the wheels and one of the wheels feels weird it's feels like bumps when I turn the wheel can you tell me what's the problem
@lesussie29188 жыл бұрын
+Cris Ramos Have you try to reset the hoverboard? can find video about that on youtube, but a very important point is the final step, you cannot turn off the hoverboard until the red light keep flashing for at least 8 times. Someone turn off only flashing 3 or 4 times, that may cause loss of program, then hoverboard is broken.
@bryanamaro288 жыл бұрын
mine wouldn't turn on so i replaced every single part and now it works perfect. the only problem is that the battery light does not turn on and it won't charge it at all. i have tried different chargers and it just won't charge it. can you please help?? thank you
@lesussie29188 жыл бұрын
+Bryan Amaro The control board needs to replace.
@kiran46918 жыл бұрын
well I did try this solution, has worked for me before but now the problem continues with the gyro red light blinking twice.. what could possibly be wrong.?
@EliteGamerMGT5 жыл бұрын
Same
@enochbanza33249 жыл бұрын
I have pretty much the same problem as you, but my lights blink 2 times at once (not 4 times as yours). I have tried to connect all the wires, but it still doesn't work!
@enochbanza33249 жыл бұрын
+Le Sussie Yes I have double checked all the pins, but nothing works. I am pretty sure it something else since even the blinking cycle is different than yours!
@lesussie29189 жыл бұрын
+Enoch Banza Two times blinking may be caused by motor power line - the three green lines.
@armaniguerra8209 жыл бұрын
I have the same problem I did what you said and it still does not work
@alejandroalbertofuentesurr49978 жыл бұрын
I first stopped spinning a wheel, you after the other and now works no, that I can do? already reset and nothing
@whatarethose85338 жыл бұрын
when i get on my board the right side flips out and the left side is perfectly fine any solutions
@berv91694 жыл бұрын
What are Those that happened to me and I had to pay fifty dollars to get that repaired it’s the wheel and the motor that’s broken
@rosendofarias25669 жыл бұрын
Thank uuuuuuuu it worked 👻👻👻👻👻
@lesussie29189 жыл бұрын
+Rosendo Farias No problems
@ibzz1078 жыл бұрын
My light and battery are green. But one of the led headlights always stays on. And that side doesn't work. What do I do?😩
@bustedoff60388 жыл бұрын
Me to but i really don't care
@ryleigholiver94558 жыл бұрын
One side wont work how do i fix it?
@dominicanderson57467 жыл бұрын
even if i charge my battery it says it charger but then i turn it on the battery light start blinking... pls help
@fearring63098 жыл бұрын
Is This Dangerous
@ColeStudiman8 жыл бұрын
Very ;)
@vincentvlogs62318 жыл бұрын
This is the easiest way to get Electrocuted
@eminkalac25718 жыл бұрын
Mine doesn't flash red but won't move it turns on fine but won't move
@alexmani75768 жыл бұрын
HELP! My hoverboards lights stay on and it does not let me ride HELP ME PLEASE!!!
@alejandroalbertofuentesurr49978 жыл бұрын
I can change left and right wheels to see if they work well
@lesussie29188 жыл бұрын
+ALEJANDRO ALBERTO FUENTES URRUTIA The two wheels may be not installed very well. You may check the connection line on the motor.
@nashnuts8 жыл бұрын
I can't turn off mine, continuously beeping and flashes red light, please suggest me what should I do???
@lesussie29188 жыл бұрын
+Nishant Rajput you may try to reset it .
@nashnuts8 жыл бұрын
Le Sussie I sold it to somebody, now I am out of tension.
@tonyastolz-aiken67467 жыл бұрын
Le Sussie I've tried calibrating it and all I can't figure it out it had the red light but now it shut off and won't work the 2 wheels do not move or anything
@josephandry76828 жыл бұрын
plz help i did exactly wht u did and it still was blinking red
@SamanTvVlog6 жыл бұрын
calibrate it.
@منوعاتغريبة-م6ك8 жыл бұрын
Guys don't touch the battery of the Segway if u move it the Segway not move u need new battery
@christianjadevaler70277 жыл бұрын
i have the same issue but this did not work. please someone help.
@SamanTvVlog6 жыл бұрын
i think you should try to calibrate your hoverboard.
@MrPeps-vb8oi8 жыл бұрын
I have that problem but with Green lights
@meyaxjas12308 жыл бұрын
my bluetooth on the hoverboard stopped working how to fix
@senpaikae8 жыл бұрын
+Mark Gomes Same here, and now my keys don't work on it
@quceee52807 жыл бұрын
Itzurgurlz Destiny&Meya bruhhhhhhhh
@kelleyodipo5 жыл бұрын
why would you risk doing this
@thejesterman8 жыл бұрын
My red indicator flashes 5 time help?
@lesussie29188 жыл бұрын
+TheJesterMan You can try same steps.
@pyromaniaxproductions63728 жыл бұрын
same thing to me is happening, changed the gyroscope, reconnected everything, pushed every pin, still nothing and still blinking 5 times when I put pressure on the pads ...
@dopepranktv3118 жыл бұрын
Help 😭 it dosnt work
@jrbeezy9718 жыл бұрын
Blue light on but one wheels don't work
@Sydpyd8 жыл бұрын
It didn't work but also one of them is not staying it keeps on going down
@lesussie29188 жыл бұрын
+Sydpyd 1234567890 Just check all the pins, disconnect them and then re-connect them.