how to fix indicator turn signal light on

how to fix indicator turn signal light on
Mercedes Benz C200.W202
Year 1997
2.0CC
The turn signals in my 1997 Mercedes Benz C 200 ,W202 do not work. Today we are going to diagnose why the signals failed, including the hazard relay, checking fuses, and separating the circuits.
If you like this video of mine, please subscribe to my channel, click on like and bell button, everyone will be fine, stay healthy, pray for me
How to fix indicator turn on////
• how to fix indicator t...
KZbin
/ @scsautomotive.1988
Facebook
/ sharifhossan.hossan
#turnsignal #howto #turnsignalrelay #howtorepair #flasherrelay #howtofix #flasherrelay

[@boscocheung1782]

My turning signal stopped flashing so I unplugged and re-insert the relay and fuse, it works now. Thank you for the video

[@SCSautomotive.1988]

Thanks for you,,,,

[@visionlink2012]

I have the same problem, my car is 1993-W124 , will try your method thx !

[@SCSautomotive.1988]

Thanks for you

[@firdausravindar977]

Very Good info.Thank you for posting this video. By the my Merc the hazard light sometime turn on by it self. How to troubleshoot it.

[@muneeb6502]

Hello can you please help i have a problem ....in my w210 e320 1999 When i tun off the car and leave then come back later ...remote lock dont work cabin light not working ...horn not working...turn signal not working....vacum pump dont work....and seats dont work ...i disconnect the battery and put back everything work fine ...then it happen again some time a day some times a weeks and the story gose on Whats wrong with my car?? Help pliz

[@firdausravindar977]

Salam alaikum, Can you make a video on trouble shooting instrument cluster of the sane mercedes? My gauges all not working.😅

[@raminazayev3575]

Thank you bro🎉

[@SCSautomotive.1988]

Well come bro

[@jozzerful2]

I had a quick look at the fuse board and noticed that there wars in empty place where a fuse once was and an empty space where a capacitor once was now I know sometimes there are blank areas but when I looked into it carefully I could see not there wasn't metal in usually I ain't blank will not have a metal wiring hooked up to the empty slot s

[@eduardomoreira2076]

Kinda same problem in a W211 2007.

[@jozzerful2]

In my 2005 C-Class kompressor w203 I only noticed the indicator blinking left when my main headlight went I have replaced the bulbs and the console redoute says no faults but it is still blinking I know the relay is not broken because over the past couple of days it has rotated from blinking left to blinking to the right when it was blinking to the left and I indicated to go right it would link at a normal speed and vice soul as I say I have replaced the bulbs and the console says no faults so I have disconnected the battery turned the lights switch-on to slowly drain any capacitors so I am hoping in about half an hour when I reconnect the battery my problem will be resolved hopefully if not I do have a brand new edition of the user manual off of the car so I will find where the relay is and clean all the terminals and the stocks male and female connectors is there anything else I am not doing that anyone could suggest

[@Freedmevr45]

Is it necessary to disconnect the battery before pulling relays? Call me paranoid but knowing my luck I'd fry the system

[@SCSautomotive.1988]

Sorry boss late I reply, no need to open battery to open relay

[@jozzerful2]

When you have disconnected power from the battery in order to try to reset the cars computer is 45 minutes more than enough

[@SCSautomotive.1988]

Thanks for you