How to fix Logitech X50 Bluetooth speaker CRACKING SOUND

buy me a drink? - paypal.me/jadednirac?locale.x...
This is a video tutorial on how to fix Logitech X50 Bluetooth speaker CRACKING SOUND
RESPECT and SHARE Thank you!
SUBSCRIBE and like for more videos!
Ocean by KV / kvmusicprod
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2OCvpHU
Music promoted by Audio Library • Ocean - KV (No Copyrig...
IG: / jad6d
Twitter : / jad6d
FB: / jadednirac

[@SMITESHSURESH]

I was just trying to find how to open the speaker to try and fix it, but this! This is exactly what I needed 🤯Thank you so much!!!

[@aljonacacio8279]

My jbl go has the same problem, it also has some cracks that causes static sound. What I do is I put a very small amount of super glue using needle on each cracks. I let it dry for about a couple of minutes. Fortunately, it works. My speaker now works perfectly well again. This technique might works on small to medium size spaker with mild to moderate damage.

[@tejassharma6053]

Which glue did you used??

[@Premnicholussamson]

To fix that diaphragm i just used a Electrical insulation tape..and it worked fine. Did the job 👍🏻

[@Jad6d]

that works too

[@danielgallo7343]

Al menos deja de sonar horrible..gracias por la solución

[@mayuraggarwal1925]

My Logitech X50 has same problem and resolved like you and sound is very perfect. Thank you so much... :)

[@vilgregorioorada3022]

i never expect na masasayang ang oras ko manood nito that transparent tape na nilagay bibitaw din yan... 'Rugby' lang katapat nyan

[@komphatak3395]

Exactly the same problem. Thanks mate.

[@someguy5719]

I repaired mine using surgical tape, i think it's much better than using plastic tape. Your video was very helpfull for the repair, thank you🤝👋

[@jimvenmortel6934]

I used it too ,much better than plastic tape .

[@a.a.837]

Me too lol

[@baminorchez683]

Thank you so much.....haven't been using due to cracking sound for almost a year and almost threw it out.... Now its fine as new....

[@adityaprakash1148]

A very thank you fOR MAKING THIS VIDEO , You Extend the life of my X5O life.

[@rittoroy6582]

Thank you so much... solved my issue

[@ashishsharma582]

thanku bhai meri problem solve ho gyi sirf apki wajh se 😘

[@hitanshuroy8443]

Hi I just repaired my Logitech X50 & it works absolutely fantastic, thank you so much. Love 😍

[@kirankinnu7463]

From where?

[@jimvenmortel6934]

Thank you so much Finally I fix my speaker same as you .

[@nikhilganesh1438]

Thank You So Much bro, it works with my JBL Go speaker, keep it up!

[@faresbahareth2723]

Thanks, it's really fix my problem with my JBL Pulse speakers

[@Jad6d]

good to know, please like and sub, thanks

[@adityathakur5001]

Thanks bro. God bless you

[@AniketHanumante]

Thanks!!

[@juandanielcarpio6960]

Gracias bro! Problema solucionado

[@XxvakerxX]

En la mía no se notaba algún daño pero seguí con los pasos con cinta de aislar eléctrica y quedó excelente Muchas gracias!

[@lilianbojorquez3274]

THANKS!

[@turkurma1379]

Thankyouuu broo!! it works✨ Im glad that my speaker is usefull again and save my money💓

[@ramaraman9256]

Thanku bro. 👌

[@emmanoeljunior5581]

Thanks, it helped a lot!

[@Jad6d]

im glad, please subscribe

[@macranjoh]

How did you remove the top cover? mine feels stuck :/

[@arnavsadhu]

Could u tell what the speaker part number says about it?

[@ramarathod859]

Thx dear we need this video

[@Jad6d]

welcome, sub it will greatly help :)

[@vimal9319]

best is to use a rubber-based adhesive

[@MasakyoRenSai]

Any recommendations for products easily found in the Indian market?

[@yizhanlove1877]

I have a different problem. i dropped my bluetooth about a month ago and now it does not make any sound. I open it but the speaker is not craked. can you please help me. its atendo sound with a lamp.

[@marlonbraydonvelasquez9706]

He vuelto a usar mi bocina gracias a este video 😃

[@nosdenosde]

I used flexible adhesive made by scotch and it worked. but the sound is not the same quality.

[@bryanrafsanzani225]

may i know the driver name and size? i was searching for that & cant found it

[@adah17]

Thank you for this video I was able to fix my Logitech X50.

[@Jad6d]

welcome, a like and subs would be appreciated, and an update by now i used " stickglue " not scotch tape

[@shafanisa3608]

@@Jad6d what if i use silicone rubber sealant? is it okay?

[@kingyt6121]

@@shafanisa3608 yes

[@douglasperez3977]

Great..! Job ....!

[@Jad6d]

thanks please like and sub

[@midnightvegeta]

sakto! thank you!

[@Jad6d]

welcome, sub it will greatly help :)

[@yasukayami1820]

Where i can buy tools

[@frankofranko282]

What size of the speaker..

[@snehasingh5655]

Help me cupkarbar kaise remov Kiya hai

[@melbinvarghese2888]

Can you give the technical specifications of the diaphragm, so that I can buy it separately from a spares shop?

[@Jad6d]

sorry but logitech did not provide any, maybe you can bring it to the shop with you

[@amargupta705]

Brother go and visit 'ALL ABOUT JUGAAD' channel he has a permanent solution for Logitech X50 cracking sound. Cause i was having a same problem like you👍

[@gitagupta3825]

@@amargupta705 yes bro i had seen his video he gives a really good solution for Logitech X50.

[@Yhill_nn]

would this apply to cracked bass sound? i've got mine dropped a few times (this speaker is really sturdy btw). the mids and highs are still working ok, but the bass got affected. even when youre just listening to a vocal recording of people speaking, but a bit bassy, it's cracking. i think a part of it broke inside coz when i shake it, i hear something from it, like a piece broke. i hope it's not major and can still be fixed

[@Jad6d]

yes the tear will cost the bass sound to crack

[@Yhill_nn]

@@Jad6d cool. Im gonna try to fix it. Hope i wont do more harm lol

[@julianperez513]

Se mojo mi logitech x50 maldita sea sera que hay solución😢???

[@lauraromero6965]

Cómo pudieron quitar la top cover!!!

[@mohammadwallymohamad5225]

What is the size of the speaker

[@premkhatoi4348]

How New spekar replace

[@justmayalittle]

my speaker fell of and now it has that cracking bass... can that be fix by that?

[@Jad6d]

you have to open it, if the diaphragm is the one broken then it can be fixed

[@TheGuscolombia]

Una mejor forma es usar pegamento de zapatos, yo lo use y feliz porque la cinta con el tiempo falla la goma, use pega de zapatos porque adquiere la forma de la suspensión de caucho rota y la reemplaza obteniendo el sonido lo más original posible, saludos

[@prateekdey8952]

Gasket makers silicon work great for these

[@prasanna250]

Sorry don't try feviquick. And tape also. There is so vibration in sound so there's 2 things not working u have to change speaker

[@arieltemp]

How many inch on this speaker??

[@TrackerScout]

Fix may be power strip: Logitec speakers seem to do it, usually to surround sound speakers. But for me after trying everything and even though did it when was unplugged from pc. The problem I discovered a week later was that my power strip was too close to the subwoofer box (all speakers plug into the subwoofer). It took awhile to discover because for years I had the same setup for my pc, power strip and subwoofer on the floor and never had a problem, only recently started doing it. But am glad I finally figured it out.

[@kayemendoza3726]

Hi. I can’t seem to open the top cap even after using hot air. How do I do this?

[@Jad6d]

just force it, maybe the adhesive is stronger on your unit

[@tevesjohndavid5416]

How did you open the topcap it seems impossible

[@Jad6d]

just pry it, it is just held on by an adhesive, you can also heat it with a heater to soften the adhesive

[@tevesjohndavid5416]

Thaaanks

[@chira4real]

did i removed it

[@deeprana6069]

From where we can buy this rubber ring

[@Jad6d]

you cant buy that, thats why we need to DIY fix it

[@Noir-mh3es]

i use a masking tape with T-7000 adhesive

[@jasperkennethsi]

Thank you hahahaha

[@Jad6d]

welcome, sub it will greatly help :)

[@sreyasdaniel7860]

You are a legend

[@karansingh-tu4eg]

Has it repaired upto 90% bro

[@Jad6d]

yes about 90% sound quality

[@marknielalcabasa8717]

I used glue for the speaker and it sounds like new must try

[@swetharavi4906]

But it gets teared again....

[@marknielalcabasa8717]

@@swetharavi4906 put 3 to 4 coat glue on the all speaker

[@marknielalcabasa8717]

@@swetharavi4906 if you use glue sticks it will not bounce and no bass trible only

[@swetharavi4906]

@@marknielalcabasa8717 thank you... 😊

[@shafanisa3608]

what if i use silicone rubber sealent? is it okay?

[@dream0darkness013]

Mine has no sound whatsoever

[@carlitosmontejo5441]

If it worked for me thank you very much I love you

[@vivekdasakashdas5737]

A Kash DJ

[@shivamsingh40]

Still can't open the top lid

[@Jad6d]

you can use a blower to heat the top portion to soften the adhesive

[@brentgiant.v.2691]

Sa akin linag yan kulang ng stick glue

[@ayushjoseph2886]

You can deny or ignore the truth but you can't change the truth. Jesus is the only and only way to heaven. Repent for your sins.Jesus Christ is Lords of lord.There is no other way to get heaven without Jesus.He died for mankind sins and ressurected from death ,And his second coming is soon. Today is the time , whosoever believe and obey JESUS Will get Salvation and will be saved from eternal death. REPENT FOR YOUR SINS.You don't know when you will die. JESUS SECOND COMING IS SOON

[@farhadrahman1658]

Useless tips.

[@ryanreylozano131]

Exactly the same problem. Thanks mate.

[@ayushjoseph2886]

You can deny or ignore the truth but you can't change the truth. Jesus is the only and only way to heaven. Repent for your sins.Jesus Christ is Lords of lord.There is no other way to get heaven without Jesus.He died for mankind sins and ressurected from death ,And his second coming is soon. Today is the time , whosoever believe and obey JESUS Will get Salvation and will be saved from eternal death. REPENT FOR YOUR SINS.You don't know when you will die. JESUS SECOND COMING IS SOON