how to fix nissan micra k13 wheel bearing hub drum brake pads DIY nissan micra k12 service

To fix the wheel bearing hub and drum brake pads on a Nissan Micra K13 and service a Nissan Micra K12 yourself, follow these steps:
Nissan Micra K13: Fixing Wheel Bearing Hub and Drum Brake Pads
Tools and Materials Needed
Jack and jack stands
Lug wrench
Wrenches and sockets
Screwdriver
Brake cleaner
Grease
New wheel bearing hub
New drum brake pads
Steps
Safety First:
Park the car on a flat surface.
Use the parking brake and place wheel chocks.
Remove the Wheel:
Loosen the lug nuts.
Lift the car with a jack and secure it with jack stands.
Remove the wheel.
Access the Drum Brakes:
Remove the brake drum. If it's stuck, gently tap it with a hammer.
Remove the Brake Components:
Take out the brake pads, springs, and other components.
Remove the Hub Assembly:
Unscrew the hub nut and remove the hub assembly.
Install the New Hub:
Place the new hub assembly and tighten the hub nut.
Reassemble the Brakes:
Install the new brake pads and other components.
Ensure everything is securely in place.
Replace the Drum:
Put the brake drum back on.
Reinstall the Wheel:
Mount the wheel and tighten the lug nuts.
Lower the car and fully tighten the lug nuts.
Test:
Test the brakes by gently pressing the brake pedal.
Ensure the wheel spins freely and the brakes engage properly.
Nissan Micra K12: General Service
Tools and Materials Needed
Basic tool kit
Engine oil and oil filter
Air filter
Spark plugs (if needed)
Brake fluid (if needed)
Coolant (if needed)
Service manual for specific details
Steps
Engine Oil and Filter:
Drain the old engine oil.
Replace the oil filter.
Fill with new engine oil.
Air Filter:
Remove the old air filter.
Install a new air filter.
Spark Plugs (if needed):
Remove the old spark plugs.
Install new spark plugs.
Brake Fluid (if needed):
Check the brake fluid level.
Top up or replace if necessary.
Coolant (if needed):
Check the coolant level.
Top up or replace if necessary.
General Check:
Inspect belts, hoses, and other components.
Ensure everything is in good condition.
Final Check:
Start the engine and check for any leaks.
Make sure all fluids are at the correct levels.
Performing these tasks will help maintain your Nissan Micra K13 and K12 in good condition. If you're unsure about any step, consult a professional or refer to the service manual.

[@la9649]

❤looks like a lot of work has been done to replace the wheel bearing hub