12:05 listen to that advice guys! DIY is what's will pleasure your day, learn, try, and you'll get the fact: if someone can do it, i can do it too! Thanks for sharing gents! 👍 Cheers from Saudi Arabia 👋🤍.
@HomeOwnerRepair Жыл бұрын
Thanks for watching!
@xXSlickNickXx7574 ай бұрын
Who needs a torque wrench anyways haha good work thanks for the advice
@HomeOwnerRepair4 ай бұрын
Thanks for watching.
@bmocinokc2 жыл бұрын
The way to separate the pan is by putting one of the bolts into the little square metal thing that’s next to one of the bolt holes toward the front of the pan. It doesn’t have a hole to thread into so it pushes the pan off a bit, then you use PLASTIC or WOOD tools to pry/separate it the rest of the way.
@HomeOwnerRepair Жыл бұрын
Thanks for the added tip. Didn't notice it on the oil pan.
@IT-TechExpert8 ай бұрын
yea you dont use a flat screw driver and a hammer :P ahahah j/k ( i know he was being careful :)
@salvadorbelisario6995 Жыл бұрын
Just for your info guys, you don’t have to pry or use a screwdriver and pound to remove the pa . There supposed to be a three hole and use the same screw you removed from the pan and screw those in the three hole and that will speed out the cover. Gods job guys. God bless
@HomeOwnerRepair Жыл бұрын
Thanks for the added Tip. I'm not sure if this particular pan had a different way to break the oil pan free.
@reynoldaudate1445 ай бұрын
That was a great video. I need to remove the lower timing cover on my 09 c300 4matic sport. I am told I need to remove the lower oil pain & lift the engine up. Do you have a video on that? Your help will be very much appreciated.
@HomeOwnerRepair5 ай бұрын
We currently do not have an auto repair video on this particular repair.
@moetic66012 жыл бұрын
Hi is that the oil level sensor with the two bolts under thr oil pan? I have to change mine the check oil level at gas station light keeps coming on snd oil level is already good
@HomeOwnerRepair Жыл бұрын
What part of the video are you referring to?
@randysmith2992 Жыл бұрын
is the oil level sensor inside , do u have to take the oil pan off to change it ? thanks
@HomeOwnerRepair Жыл бұрын
I'm not sure we haven't tackled on yet on this vehicle.
@onefiveoh10526 ай бұрын
Wouldn’t you do the oil pickup O ring while there?
@HomeOwnerRepair6 ай бұрын
It wasn't necessary.
@farhadfarhadian1111 Жыл бұрын
Mine is E350 2012 bluetec i see diesel seeping thru the oil pan gasket can you tell what’s going on and how to fix it
@HomeOwnerRepair10 ай бұрын
If the oil pan gasket is leaking it should be fixed.
@daby83992 жыл бұрын
I had a lower pan oil leak in a 2003 Hyundai Elantra it's been fixed with the permatex The Right stuff gasket maker.. but now for some reason when I use my heat in my car it is so hot that it's unbearable. Could this have anything to do with the oil leak fixed prior to that it was nowhere near as hot as it is now it's so hot I can't stand it.
@HomeOwnerRepair2 жыл бұрын
That repair has nothing to do with the heat.
@daby83992 жыл бұрын
@@HomeOwnerRepair and now he just told me that he did not wipe the excess off he just spread it around there is that going to be an issue
@farerse2 жыл бұрын
nice job but run the finger on the inside too so it doesn't fall into the oil
@HomeOwnerRepair2 жыл бұрын
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
@kuldipdhak797210 ай бұрын
U should start engine to check leaking
@HomeOwnerRepair10 ай бұрын
Yes, Once you have finished replacing the gasket on the oil pan you should start the car and check the oil pan for leaks.
@cosmokramer4585 Жыл бұрын
OMG the pounding of the oil pan….really? There is a threaded hole for you to simply install a pusher bolt and it will literally pop right off. Curious how much aluminium you gouged off of the upper pan??
@HomeOwnerRepair Жыл бұрын
We were careful and the pan was fine.
@JayMaverick5 ай бұрын
Oh my goodness guys. Maybe consult the repair manual next time? This is not a good guide video for such a relatively simple job. Don't pound the oil pan loose. That's a great way to warp the oil pan or chip the aluminium block. Don't use RTV sealant like toothpaste. 1-2mm bead is well enough, otherwise you risk clogging up your oil pickup.
@encinobalboa Жыл бұрын
Geeze, RTV is not toothpaste. Squeeze out could separate from pan and clog oil passages and pump screen.
@HomeOwnerRepair Жыл бұрын
It is fine.
@kuldipdhak797210 ай бұрын
This job is complicated
@HomeOwnerRepair10 ай бұрын
It is not too bad to reseal the oil pan. If you follow the video you should be okay. Hope the video helps you out.
@redfalcon44692 жыл бұрын
That is a lot of RTV 😒
@HomeOwnerRepair2 жыл бұрын
You need to apply a decent bead or else you will end up with a leak. Believe me I've seen it happen.