How To Fix or Replace Control Arm & Hinge Pin on Losi Losi Lasernut U4 / Losi Tenacity DB Pro TT Pro

After a quick crash it was time to fix the front end of my Losi Lasernut U4. It is not too bad to get done but does require a few steps to make it happen. For parts and tools for the job follow the links below:
Front Arms (LOS234016) amzn.to/3oSXY56
Hingepin & Kingpin (LOS234021) amzn.to/3qurdvu
Pin Mounts & Cover (LOS234019) amzn.to/38PKG3C
___
Tools for the job:
Dynamite Metric Hex Drivers: amzn.to/3bNoCbR
Dynamite Metric Nut Drivers: amzn.to/3ikYJ4p
RC Power Tool Tips: amzn.to/2KnMPKB
Milwaukee M12 Drill: amzn.to/3oSpC2f
___
Other Losi Lasernut Videos:
Upgrade every Losi Lasernut NEEDS | EcoBoost 36KG Servo Upgrade on Losi Tenacity Platform (DB PRO): • Upgrade every Losi Las...
Unlimited FUN and 4S POWER!!! Losi Lasernt U4 Rock Racer RC Buggy Review and Owner Thoughts: • Unlimited FUN and 4S P...
How To Fix or Replace Control Arm & Hinge Pin on Losi Losi Lasernut U4 / Losi Tenacity DB Pro TT Pro
----------
DISCLAIMER: This video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

[@joaquinrios1028]

This happened to me today and 😢😢😢 thank you so much

[@RCRoads]

Kind of sad watching the U4 coming down the road with a broke front leg. Like a wounded animal. Great job showing the installation. It's so nice to see how it all fits together. 👍 I guess it's a common issue from all the comments below. ( ̲̅:̲̅:̲̅:̲̅[̲̅ ̲̅]̲̅:̲̅:̲̅:̲̅ )

[@eduardonava6284]

This just happened to mine this morning

[@nickvledder]

That was a nasty injury, but you repaired it with dignity.

[@JrsGasolineAlley]

All in the fun of the hobby

[@brandonsmith4367]

Just broke mine today. Quick question, do I have to replace the pin cover? Mine does not look damaged....am I missing something??? Thx

[@jkitto2008]

Excellent video, very informative. This is what's going to help me replace my control arm that I have now broken. I have two Losi Laser Nut. One is a parts case the other one fairly new but I'm always having issues. now the front control arm broke right where the shock mounts. Just after a light tap on a tree. So now I know how to do the repair thanks to your video looks really easy my issue wasn't as severe as yours. But man I tell you these things break easily. Lol. I had so many issues with my first one just decided to use it for parts because I knew I was going to have issues with the second one. ROFL🤣❗️ might as well save time and money and have the parts right here. Every time mode order parts for Losi they were always back ordered.

[@JrsGasolineAlley]

Challenges they're so dang fast which means crashes are bigger and more damaging

[@jkitto2008]

@@JrsGasolineAlley , lol 🤣. You nailed it, most of my runs are spent trying to avoid things at high speed. ROFL. But its fun. I see Losi just came back with their 6th scale version two of that buggy. Can't remember the name, ( Super Rock Rey ) but it didn't do well so it was discontinued. The support for front shocktowers would split in half. Really cheap plastics. Hopefully the new version is better.

[@davidmatthews2647]

I am just getting my Lasernut tomorrow from UPS and was watching your video, I have a question though, When you had the Diff out why didnt you check it for any damaged gears or fluid level? I have heard there are a lot of issues with that.

[@JrsGasolineAlley]

Damaged gears was only a problem on the first run. No issue now, just enjoy

[@sorilk4205]

Hello buddy, I've got a ZD DB-10 , I think is kind of same chasis.. could you tell me if I can use this stuff that you use to fix your car? Thank you !

[@JrsGasolineAlley]

Links are in the description.

[@youtubeuser5424]

Same procedure for the rear? And would it be the same parts?

[@JrsGasolineAlley]

Roughly the same procedure. THe rear arms are different than the front.

[@rcplaytime]

This happened to my lasernut😖😟

[@JrsGasolineAlley]

Oh no, atleast the fix is easy.

[@jkitto2008]

Happened to two of mine bro. 🙄.