How To Fix P0300 P0011 P0021 Nissan Murano 2003-2014

[@brandontran5160]

Help! My 370z nismo has been having CEL on with random misfire code P0300 with high idling at 100 rpm. After an oil change, new spark plugs, welded a crack on the catalyst converter and replaced gaskets on exhaust pipe, code P0300 is still on. Then I recently replaced both camshaft sensors and now code P0300 still on plus new code P0011 bank 1 and the car is sluggish and can't get pass 2200 rpm. I then reset CEL and I can drive pass 2200 rpm but CEL keeps flashing. Do I need to change ignition coil on bank 1? Thx.

[@gpaulwelch7127]

I got a 04 Nissan murano that has code p0300 I have changed plugs coils fuel injections cam sensers crank senser o2 senders fuel pump

[@gregoryguider6528]

Catalytic converter, exhaust?

[@edwinchourio3018]

Que cuesta en dólares arreglar el problema de la válvula del código P0011

[@davidbryant5875]

Never heard of changing oil causes a miss fire lol

[@KahielHastings]

Help please brother...I have a 2016 nissan altima reading p0011 and p0300 should I change cam shaft position sensor it is idling low and will cut off. If stays on it idle low and shakes really bad. What should I do, should I change camshaft position sensor and or change oil? I just got it out nissan shop for cvt transmission change. Help please?

[@charlesedwards3490]

KahielHastings haveing the same problem what’s caused yours I have 2015 Nissan Altima

[@NFLYoungBoy223]

I’m sure just changing the oil worked right?

[@mattm2411]

did you get it fixed?

[@ДимаиКрис-и5ю]

The solenoid valve tubes are not correct here

[@Sroor90010]

So changing oil fixed the vvt selenoid issuues?

[@karrskars]

Yes but that’s just something you want to start with obviously

[@Sroor90010]

@@karrskars i had 2 codes one is tp sensor for throttle body ive changed with used one cause these are expensive if it doesnt work after relearn will return it back and one for tp vvt but my oil is clean anyway ive cleaned and ultrasonic vvt with no luck then bought brand New it seem ok from first start up only got tp sensor code I didnt relearn it ill do that and test but so far so good for vvt if it comes back hope not ill change oil and filter, Thanks for fast reply

[@Sroor90010]

@@karrskars Just tested now every thing is ok after relearn throttle body and there is vvt code on first start up cleared it then went out for test drive every thing is ok so nice then once reached home switch it off and on its ok no codes will see once its Stay for few hours if its come back again ill put engine flush and run it few minutes then drain it and change oil and filter 👍 hope this will help and Thanks for your video and your reply 🌹🌹🌹

[@jerry-yeezy9733]

I got the p0011 code then I changed the oil still had the code so I changed the solenoid and camshaft sensor but now the car dies right after I start it

[@CharlesWilson-oz8ys]

@@jerry-yeezy9733 same shit happens to my car. Blew 2 engines up its doing it again on 3rd engine and I've done everything I can parts and all