How to Fix Stop code Critical Process Died Windows 11

[@razoblicavanje4231]

If you overclocked RAM memory like the Benchmark site says, you can disable it. Go to Bios, press Load Optimal Default Settings,, and press f10 to restart. It helped me.

[@Real_MrEar]

My gaming laptop keeps crashing everytime on Fortnite before I even get to the lobby, and for mw3 the computer crashes and the screen goes blue, how do I fix it?

[@Lightyagamie]

Didn't work for me , and i can't reset my pc , it says - There was a problem resetting your pc

[@burnzzy]

Same

[@Lightyagamie]

the only option left in this error is to reinstall windows from bootable usb

[@Link_ZA]

Me too

[@TREEDY01]

Same

[@TREEDY01]

Any fix yet ??

[@F.B.I-Philippines]

It still crashed it said "Your device ran into a problem and needs to restart. We're just collecting some error info, and then you can restart." And when it is 100% nothing happens

[@thetanakakeith3213]

Hi Did it work

[@BetaShorts09]

same

[@BARDAKABRAMA]

4:00 that helped a lot. Thank you

[@Integraudio]

0. Let's assume you have created restore point 1. Open CMD in the Blue screen 2. Type - Notepad and hit open 3. Go to - Windows/System32/Config 4. rename software to software.001 5. rename system to system.001 (you need to hit F5 to see the change in renaming a file) 6. Close the notepad 7. Write Exit in CMD 8. Try to restore PC with one of your earlier restore points. If doesn't work, try to restart PC

[@Lightyagamie]

Bro how to rename?

[@DaxTheG]

How to get to the cmd in bsod?

[@Lightyagamie]

@@DaxTheG advance - troubleshoot - advanced option - command prompt

[@DaxTheG]

@@Lightyagamie But it instantly goes to bsod i cant do anythink

[@Lightyagamie]

@@DaxTheG BSOD can happen due to many reasons so i recommend you to don't waste your time and reinstall windows ( that's what i do when nothing works)

[@floatingrabbit3556]

I have an x570-p motherboard and this happens when I have all four ram dimms (running at 3600mhz) in the slots. When I have only two I don't have issues. Sometimes my fix wouldbe to switch the boot drive to another slot. It is so strange. Nothing on the interent really helps me excpt these things.

[@kennethtaylor4537]

Got the same issue. Were you are to fix it?

[@asatechnical]

After installing the ram did you reset the BIOS ? And note: BIOS update may be required in some cases to fine tune DRAM compatibility.

[@boometech6613]

@@asatechnical How do you reset the bios

[@amitkargaiyan]

I try all step but still not working for me..any idea 💡 how to fix it

[@mortith2463]

Had the error after rebooting my computer from my Raspberry/SteamLink... This fixed my problem, thank you!

[@binamkumari4373]

Really

[@GoatThuKid]

One of my buddy tried the command prompt and now the screen won’t turn on and it’s just black when he turns it on

[@VolkerDittmar]

A big, BIG THANK YOU for your video, it saved my day!

[@asatechnical]

Glad it helped!

[@SpaceGood.]

Bro it’s on the blue screen stuck on 0%. Its only some games and programs that gives me this blue screen. I don’t know what to do because I don’t want to get a new pc

[@akshay1240]

I need help. I own an Acer Nitro 5. I have secure boot enabled in the BIOS, but when I launch Windows, the secure boot status off

[@danielarias9466]

Hello , I can not enter to safe mode or the winre to troubleshoot, please help me

[@nexusftw]

Same

[@asatechnical]

Did you try to offline restore the system health by using a windows 11 bootable USB drive!

[@soledadbadar5578]

My laptop stuck in 0% complete, even after waiting for an hour? Why? Should I still wait until its 100%?

[@Msilva41]

Would reinstalling windows work? I keep trying but nothing seems to work.

[@firefist95]

I did all this stuff restoration and booting my pc is on but i can only use the mouse can't enter to anything no Google Chrome nothing in my desktop 😢, what should I do

[@darienbrewer8317]

Didn't work for me. My hardware must really be messed up.

[@asatechnical]

Try to reset Windows settings to default, after that hopefully your problem will be solved.

[@nexusftw]

@@asatechnical how to reset windows setting to default

[@andersfiltenborgjensen1266]

@@asatechnical yeah I also wants to know how to reset Windows to default? But I have reinstalled Windows 2 times now, but it don't have the "Critical process died" right now, but I had. Now it's doing other different errors, like before I got the Critical one! For example "page fault in non paged area" ~"kernel security check" ~"system service execution" ~"hyper visor error"~"Irql not less or equal" ~The one calt "memory management" error seems to trikker the "Critical process died" at least last it crashed fatally. I have reinstalled Windows 2 times in 24 hours, nr 2 time on another ssd, and still it crash to blue screen error, last I tryet gaming, but not with the bad Critical one "lucky" enof but now I dont dare to game because I'm afraid it will crash again, and I'm really tired of reinstall it all again, I don't know how to fix it?? The crashes began for about 2 months ago, when I got a new motherboard and CPU, but this weekend it crashed many times with the different error I mention, and then the fatal last ones? Maby it's at faulty Motherboard or CPU I got??

[@asatechnical]

Motherboard model and CPU information and Windows 10 or Windows 11?

[@Vigo.V2]

@@asatechnical my motherboard is MSI MPG Z390 GAMING PLUS and CPU is Intel i5-9600k windows 10 HELP PLEASE

[@KaanZsr]

Its so weird that my sys is installed in C drive and my other drive is D but in this command prompt its actually C is my D and E is my C haha what i figured this when i type E:

[@aguyfromnewzealand3392]

All that time and effort and it's still coming up with the same error message at the start 😔😫

[@itsmanish5341]

Can that solved

[@AltruisticSteve]

when i type in “ chkdsk e: /r “ at the end of the message it simply says “ Unable to obtain a handle to the event log. “ and does not give me a Yes or No option.. what do i do???

[@TREEDY01]

Use c drive

[@Amir_B.A_Gaming]

4:28 I get an error : Failed to transfer logged messages to the event log with status 6

[@Nokiabossyo]

Can anyone help me I tried every methods it dosent work when I tried restore point I found the problem it wont let me restore got interrupted by registery, I messed with the SvcHost split thredholdinKB pls help

[@asatechnical]

Restore the system health by using our tutorial on Inaccessible Boot Device error (try 7th method)

[@Nokiabossyo]

@@asatechnical thanks for the reply I'll try it

[@Nokiabossyo]

@@asatechnical I tried the cmd it says windows resource protection could not perform the requested operation

[@asatechnical]

If not working, try to perform a fresh and clean installation on a separate partition! After that recover your data from the old system partition (this is the recommended solution if not working any solution)

[@freshbeam7540]

It doesn’t work and it says status 6 help what shall I do

[@bakhit123]

What about the same problem for windows 10? Is it also the same solutiin

[@asatechnical]

Yes

[@SrTaaro]

Thank you very much, thanks to you I made my computer boot up properly again. When I turned it on it didn't start well and there was no image and after forcing it to start well and sending it to s mode

[@SrTaaro]

Safely I did the first procedure and it worked! Recommended video

[@asatechnical]

Really glad it was helpful to you, thanks very much for your support.

[@AverageO_0]

When I type e: it cannot find the drive thingy

[@chandrashekhar-fv9zn]

Thank you a lot, latter one worked for me . God bless you.❤❤❤❤

[@asatechnical]

Glad it helped, have a nice day

[@smnavale2]

Thank you but my problem didn't solved yet

[@asatechnical]

Try to perform a clean installation on another partition, after that try to recover your data!

[@samanthafoley3500]

@@asatechnical how do you perform a clean when you can't get past the blue screen

[@naninun]

It causes by ssd or ram if hardware, if software its driver

[@agent-dn2yk]

That works for me Thank you brother ❤❤❤

[@asatechnical]

You're welcome!

[@antukin146]

hello, I have watched your video but in my case my PC won't even open. it doesn't display anything in the screen. the power supply fan just gets loud and fast. please help me do you have any recommendations?

[@asatechnical]

It sounds like BIOS setup was not successful or your hard disk has bad sectors. You can check out our channel there's a separate tutorial is available on this topic

[@gameXwire]

not working 😢

[@PetraJoosten]

what do you mean when all of it doesn't work; you should do a fresh and clean installation on a separate partition? how does that go? do you havea video about that? kind regards Petra

[@asatechnical]

Tutorial is available in our channel!

[@PetraJoosten]

@@asatechnical sorry! can't find it. What's the title?

[@UniversalHindu]

Use reset pc option

[@woi4357]

I had this issue and tried all those steps but got the same error. I even tried changing my drive letter to match this. Eventually, I came to a conclusion that the restore point I had initiated was corrupted, which stuck me on drive x. Instead of doing a clean install- take my advice firstly. 1. Delete the partition containing the error for drive x which would show a few megabytes. 2. Run the steps listed in the video for BCD rebuild. 3. Install windows and keep old files on your system to correct any old files that are missing. 4 on boot you will encounter an error that says, “ windows cannot complete installation.” 5. Click shift and H. Turn direct system child to status level 3 for setup if it is on 1. This will allow windows to continue installation. Hope this helps :). I was running 24-48 hrs on this issue

[@garyyuen7212]

Hello, after Command prompt, it said i am not sign in as administrator. How can i fix? Thanks

[@asatechnical]

Yes, you can't fix this using a user account. At first you need to logging with your administrator account, and then try

[@VENOM_OP_YT]

run as administartor

[@VideosYouTubeCom-hv5zp]

شكران لكم على المعلومة للحاسوب .. الله يحفظكم

[@asatechnical]

Thank you too!

[@pravin-xb1zs]

Add installation boot list ? Yes (y) NO (N) All (A) What to do if something like this happens

[@asatechnical]

A for All.

[@mrbutterknives4340]

I need help with this too

[@mrbutterknives4340]

It says "cannot find the path specified"

[@vamshikrishna4477]

00:33. How to get it for me not coming

[@naveenroyal2598]

Didn’t work in my pc

[@jacqueline7093]

Can this work for windows 10?

[@asatechnical]

Yes

[@rivkahhannah]

Thank you for the good information! 😊

[@Qkizun]

Thanks for saving my life

[@asatechnical]

Glad it helped, have a good day.

[@Buurtwacht.circus]

It doesn't work

[@asatechnical]

If not working, try to restore Windows system health! In our channel a certain tutorial is available on this problem.

[@nedimshabani4697]

How dis not reset men for call computer for me men

[@SamirRahaman-y4e]

Can anyone help me....?

[@BilalBilal-ej9yn]

Hello can you help me I have arabic language pls help me

[@THECODGHOSTYT]

Ok

[@karwan320]

Thanks 🙏

[@ayanhazra1264]

Thanks Brother ❤❤

[@genegin1971]

Mine stack in 100%

[@asatechnical]

Did you try this method?

[@TREEDY01]

I can't reset it says there is a problem resetting the pc Can't restore Nothing is working

[@ProF_ESport]

Doesn't work

[@asatechnical]

Did you try to restore the system?

[@ProF_ESport]

@@asatechnical Do you mean "restore Windows" ? It is possible to do this without deleting personal files. But what does that mean? I don't want my personal/work files or apps deleted/uninstalled. It's very vague as an option...

[@asatechnical]

@@ProF_ESport if you have a windows installation media then you can perform a system restore by going to the windows recovery environment and of course without losing your personal files!

[@dipalipaul1732]

Thank you a lot.