This answers my occasional problem of chasing thread tension. It never made sense that I needed more top tension when sewing thicker seams. Now I realize one side of the foot may have been in the "valley". Thank you! I may never have figured this out without your epiphany.
@KarenLum Жыл бұрын
Thank you for using a macro lens!!! Makes sewing so much easier to learn
@seffssweetsstitches2897 Жыл бұрын
Eureka! Thanks for sharing this. I was going crazy trying to figure out why that was happening. 😊
@George_Cline10 ай бұрын
YES! This video fixed my issue that I was chasing for a long time. I’ve played with tension, replaced parts, called for help, etc. I pretty much gave up and almost sent my machine back for service. After watching this, I noticed that my presser foot was just barely kissing the bottom teeth. The middle part of the foot was not “popping” at all. I’m still not sure how to adjust this.. but what I did was to move the presser foot down slightly so that it contacts the bottom more.
@MariaDavids-db2pt9 ай бұрын
Okay 👍😊
@SailriteDIY9 ай бұрын
Sailrite does have a special unlisted video for adjusting the presser feet. Feel free to contact us for help on that topic. If you own our machine we will send a link to the video showing how it is done. email info@sailrite.com
@robert_g_fbg Жыл бұрын
Insightful. Though it hasn’t happened to me, nice to have these troubleshooting tips
@octopusiicaptn8632 Жыл бұрын
Now I understand why on my bimini repair although my test tension was right I encountered these, simple if you understand the issue, thanks
@SailriteDIY Жыл бұрын
Glad to help.
@baedb97167 ай бұрын
Oh lovely, thank you. I kept increasing tension to max but still loose stitches. I just needed to increase pressure of foot a tad.
@SailriteDIY6 ай бұрын
I'm glad you found the solution! Happy sewing!
@waterboy8999 Жыл бұрын
Thanks Eric, that's good to know!
@khcfavorites Жыл бұрын
Another pro tip from a great pro! Thank you.
@SailriteDIY Жыл бұрын
Your welcome!
@davidreyburn5548 Жыл бұрын
Nice tip! thanks!
@pam5389 Жыл бұрын
Thank you so much 👍👍
@RoundBallDefender6 ай бұрын
That works for sewing along a seam. What about when you sew over a seam, and on every seam, you get loose stitching under the seam? For instance sewing the hem of a flag. I’m sewing the end of the flag, but whenever I sew over the color change between white and red, there is a seam. On every seem, I have loose thread under the seam. Once I’m over it, the thread is nice and tight.
@interspeciesfamily8043 Жыл бұрын
Gosh, you inspire me. 🙏
@lucilledaub5991 Жыл бұрын
I don’t have a foot like this one. It was interesting.
@cyn4rest Жыл бұрын
Great info. Thanks
@beachton Жыл бұрын
Brilliant. Thank you!
@sewakader1699 Жыл бұрын
But this is not the situation for a different machine
@MariaDavids-db2pt9 ай бұрын
Many thanks ❤
@SailriteDIY9 ай бұрын
Thank you so much for your kind words! I really appreciate your support.
@carloslayana4793 Жыл бұрын
Muy buen aporte!!
@itssammiesakran Жыл бұрын
What if you're not using a foot like that?
@piorism Жыл бұрын
Well then it's not the same problem, and is likely just caused by tension in need of being adjusted.
@ayeshazulfiqar15128 ай бұрын
My bottom thread is losen 😢what to do
@shirleyscott84175 ай бұрын
Mine is not walking foot
@Kshch54777 ай бұрын
Interesting! I'm using a regular foot with Juki 300 and now I am seeing these issues, cant figure out what possibly can cause it...
@SailriteDIY7 ай бұрын
If it is not a walking foot machine then you probably have too little upper tension.
@macariomitra8765 Жыл бұрын
Piping machine
@panderichthys_rhombolepis Жыл бұрын
What's 'baak'/'bauk'?
@janicefichaux670111 ай бұрын
I think he said "bulk", as in several thicknesses. At least that's how I understand it.
@chipperleathergoods Жыл бұрын
Hi, I’m getting that on my Leather project, but the left zipper foot I’m using is at the same level as the inner foot. So, why am I getting ever larger and larger loops?
@elmawhite6670 Жыл бұрын
Good day will that foot work on my Sailrite Ultrafeed Model no. LSZ-1 Thanks for your help.
@SailriteDIY Жыл бұрын
The LS feet will not work on the LSZ, sorry.
@kalli723 Жыл бұрын
Lol! You just need to hold the thread end tight when you start stitching.