How to fix the Hobie 180 Mirage Drive!!

  Рет қаралды 9,861

Steeleprophet

Steeleprophet

Күн бұрын

Пікірлер: 18
@cliff6490
@cliff6490 2 жыл бұрын
Great video, i learned alot my question is my drive drums are really sloppy on the shaft, would replacing the needle bearings do it or should i replace drums and bearings. And also does the shaft wear down that much, or should i change the shaft also? I know its hard without seeing mine, also what are the part #s for drums,bearings and shaft? Again Great and informative video Cliff
@tylerwoodard9738
@tylerwoodard9738 3 жыл бұрын
Thanks! Helped me replace mine. Appreciate it 🙌
@WhitchurchFishing1
@WhitchurchFishing1 4 жыл бұрын
great video
@turntablizm12345
@turntablizm12345 3 жыл бұрын
Im stuck on putting the chain on properly... i had to take a break i was getting frustrated
@charlesbowen3627
@charlesbowen3627 4 жыл бұрын
Would you be interested in selling the old spline?
@haozhang6500
@haozhang6500 4 жыл бұрын
Hi, are you interested in selling the old spin?
@chrisadams4342
@chrisadams4342 4 жыл бұрын
Man setting that pin was ridiculous! I beat on that bastard a couple hours before I finally got it in place. Hope I never have to do this project again lol
@marylandmadfisherman9310
@marylandmadfisherman9310 5 жыл бұрын
How did you get the fins to line up correctly. When I put the chains and cables on one side is not straight
@Steeleprophet
@Steeleprophet 5 жыл бұрын
you have to tension the cables properly and make sure the chain is in the correct position
@localbloke2572
@localbloke2572 5 жыл бұрын
How tight do the chains need to be? There are no videos anywhere that explain how tight they should be. Do you have any suggestions?
@Steeleprophet
@Steeleprophet 5 жыл бұрын
Honestly I don't like over tightening chains. I just tightened them until they were smooth and didn't feel crunchy
@BernPisarcikJr
@BernPisarcikJr 5 жыл бұрын
My drive clicks when my left peddle is at 80% of full throw, under medium load. My dealer found nothing wrong, but didn’t demo it like I asked. Please share how your drive was clicking. Thank you very much.
@fabiancarmona5406
@fabiancarmona5406 2 жыл бұрын
So, the title should be "replacing spine", not fixing the drive.
@johanenting8168
@johanenting8168 5 жыл бұрын
If you remove the parts why dont you grease them when you replace it?
@Steeleprophet
@Steeleprophet 5 жыл бұрын
The only thing I really grease is bearings, and the needle bearings still had some grease. I don't like putting too much, because it collects a lot of sand.
@TheGreatHorde
@TheGreatHorde 6 жыл бұрын
Upload more vids!
@celestehines4810
@celestehines4810 2 жыл бұрын
who did you contact number please I do have the same problem
Which One Should I Choose?
9:07
Goss.outdoors
Рет қаралды 630
Хаги Ваги говорит разными голосами
0:22
Фани Хани
Рет қаралды 2,2 МЛН
"Идеальное" преступление
0:39
Кик Брейнс
Рет қаралды 1,4 МЛН
She wanted to set me up #shorts by Tsuriki Show
0:56
Tsuriki Show
Рет қаралды 8 МЛН
Hobie MD180 Drive Boom Replacement and Maintenance
7:13
EOFishing
Рет қаралды 1 М.
How to maintain your Hobie Mirage Drive
3:46
Louisiana Custom Kayaks
Рет қаралды 5 М.
Hobie Mirage180 Turbo fin swap
9:52
DaBinChe
Рет қаралды 3 М.
Hobie MirageDrive GT and 180 Maintenance & Tuning
8:17
Hobie
Рет қаралды 67 М.
Hobie MD180 Drive Disassembly - Part 1
9:31
Goss.outdoors
Рет қаралды 411
Hobie Lynx Mirage Drive Kick-up Turbo Fins Upgrade
3:35
Carl Dubois
Рет қаралды 2 М.
2019 Hobie Outback, 8 Miles Offshore, NEVER AGAIN (S2 Ep34)
12:13
MDLR Fishing
Рет қаралды 552 М.
Hobie GT Miragedrive Service Guide
7:30
Scott Lovig
Рет қаралды 54 М.
Hobie Mirage Drive 180 chain tension and spine wear.
4:54
Building Code Pro
Рет қаралды 6 М.
Hobie Mirage Drive - Service and Maintenance
46:59
Cornish Kayak Angler
Рет қаралды 36 М.
Хаги Ваги говорит разными голосами
0:22
Фани Хани
Рет қаралды 2,2 МЛН