How to fix the mouse SCROLL WHEEL GLiTcH [ROCCAT KAIN 100/120/200] !NO SOLDERING! NO EXTRA PARTS

Does your wheel sometimes skip a scroll or does it scroll twice
HERE IS THE SOLUTION FOR FREE WITHOUT SOLDERING

[@hayat711]

Bro this worked but now my scroll wheel is inverted please tell me how to fix this....by the way that glitchy thing went

[@KarenTookTheKids]

Is it possible that at 8:00 you put the wheel thingy the wrong way around, so that the shiny metal part is on the inside?

[@hayat711]

Thank you i got it right now !!!!

[@KarenTookTheKids]

@@hayat711 thats epic

[@lomac3187]

@@KarenTookTheKids at 8:00 i can't put it in

[@unverdaut]

you also could've changed the direction in Roccat swarm

[@Borednesss]

Followed the steps and now mine performs almost perfect. It was extremely terrible before, scrolling in a random direction every single scroll. The contact pins looked fine on mine, not bent weird or flattened, but I did notice one of the three had a noticeable gob of grease on it. The plate it rubs against was also heavily scored. I'm very surprised this fixed it as I didn't do much except clean the two surfaces. I don't see it lasting too much longer due to the scoring, but at least I tried and fixed it for the time being. Thank you very much for your help, much appreciated.

[@duncanatoroliver2542]

Had this issue with my Kain 200, followed the steps and all is well. Thank you @Schuler.

[@amazedshark0376]

this works on the 120 aimo as well the only differences being that you have to take out the rgb circuit on the roccat logo which is only an extra 2 screws before taking out the click assembly other than this slight hindrance this is a great guide and i would recommend this to anyone who has this issue, Great guide saved me 50$ as well as keeping my mouse out of the e waste bin 10/10

[@IAmDek]

I try this tutorial and after fixing my middle button dont clicking when i connect mouse to end

[@thenickfoxx]

was looking for this comment. thank you.

[@rikimiki12]

A started to have scroll wheel problems after about 6 months on a Kain 120. Google finds an increasing number of results, lots of them fail before first year. The most common problem is that the wheel sometimes reports a single scroll in the oposite direction, so you keep scrolling down and sometimes it scrolls one up then goes back to down. Nice mouse but highly annoying. They used the absolute cheapest rotary encoders. Thanks for showing how to open all parts without breaking anything

[@KarenTookTheKids]

Thanks for your nice comment. And yes its really annyoing i hab a 100 and a 102 and both wheels were broken

[@rikimiki12]

@@KarenTookTheKids I've cleaned the encoder with contact cleaner and it seems to work. But I should probably search for a compatible encoder, I doubt the fix sill last and the warranty will replace it with the same low quality type. It seems the one in Kain 120 is a 7mm encoder but I didn't think to test the detents/impulses when I cleaned it.

[@metamorph8343]

that's exactly what happens to me too. everything but the scroll wheel on the mouse is amazing.

[@nekkukln]

I have Kain 120 wireless with mousewheel-up and mousewheel-down binded to different items in dota, and at some point scroll up started to activate down and visa versa. The cleanup demonstrated in this video helped - all back to precise directions. To be honest, I didn't expect it to work. Thank you very much!

[@Buhen]

It actually works, I'm really bad when it comes to fixing thinks like that but your guide was really easy to follow. My mouse works flawlessly now, thank you!

[@KarenTookTheKids]

No problem, im glad it worked

[@Rumburacker]

tried this on my kain 100 which had this problem.. put it back together and it worked perfectly with 100% accuracy! earned a like and sub

[@ewom.]

This worked and made my scroll wheel much smoother and work perfectly! BEWARE however, the wires on the scroll wheel pins are extremely fragile, I nicked it and all three wires ripped off! All you have to do though is strip back the wire and wrap it around the pins, stick it down with some electrical tape and done! I have a kain 122 aimo so make sure to unscrew the back LED first and plug in, this caused me some confusion at first… Good video!

[@jakobb3457]

You are an absolute legend! Thank you for sharing this with us. That scroll wheel glitch has been annoying me so hard :D

[@leivandreasm1705]

I just fixed my Kain 100 with the help from your excellent video. I believe we throw away things too quickly novadays. videos like this helps reducing the ever growing garbage piles of the world.

[@KarenTookTheKids]

Thats such a nice comment, thank you very much ♥️

[@K0ralowiec]

YOOOOO Thank you soooooo MUCH!!! It helped me very well. I followed all the steps just right and BOOOOOM! It worked 😂 im am very happy

[@PlxsmicX8460]

Thanks so much. It turns out there was a bit of silicone stuff in the scroll sensor. Gave it a good clean and now it workd perfectly. Definately a scary task to do ngl

[@macd7743]

Woooooeeeeaaah!!!! (Right after the blow drying...) Hilarious! 😂 Anyhow, well done and thanks for making this. My experience with the fix: It mostly worked... The scroll wheel on my Kain 100 Aimo works much better, but it still skips a little bit. I think it goes without saying that either the manufacture, engineering, or both are flawed with this mouse-and, let's be honest, it's probably both. However, as the fix goes, my prowess in tinkering in this case could have been flawed. Plus, despite trying to be delicate, my bull-in-a-china-shop hands managed to break one of the cage pins off. It didn't seem to have an effect on the final result of putting it back together (it felt solid) but maybe it did. Also, at some point I managed to break free the right click mechanism and it was a bit of a headache to get it clicked between the plastic clips correctly. A little mouse talk: When compared to the scroll wheels on some of my other mice (e.g., EVGA Torq X10 Carbon, Razer Viper & Viper Mini, and Logitech G903 SE) the Kain simply isn't as good. Besides the Kain, I also own a Roccat Burst & Kone Aimo. The Roccat scroll wheels are generally not as nice feeling, in my opinion. But the Burst gets pretty darn close. The Kain 100 Aimo has an interesting design and that's what initially piqued my interest. I like to have mice that feel different in my hands (sometimes I use them ambidextrously) because it keeps things interesting. (For long coding sessions I sometimes like to use a fat mouse with a thumb rest, like the Kone.) The flat side on the left of the Kain 100 and built in grippy texture make for a unique experience. The flat side, however, makes the mouse a right hand only mouse. :::End mouse blather:::😁

[@Gllazzy]

Thank you very much, now i have mental health problems, one lost screw, bleeding thumb and a broken mouse🥰🥰

[@DaBomb5309]

HOLY CRAP IT WORKED. I even madea a warranty claim like a week ago that just got shipped, and figured why not give it a try. and it actually worked. I guess i'll have a spare for my family

[@przemek2466]

I didnt think this would actually work, my pins werent bent just too flat and now my scroll works like new. Thanks dude

[@KarenTookTheKids]

Great to hear

[@pantofli3130]

This video has saved my kain 100 twice till now thanks so much your a hero!

[@mikedaplioguy7734]

Thank you so much! It worked on my Kain 120

[@shanaansaleem5026]

Man bless you! I just fixed my Kain 100's scroll. Roccat did offer a free replacement but to send it back it costs me $60+ so. Thanks a lot dude!

[@MCGR]

they just have you cut the mouse cable now

[@NBoone]

@@MCGR Yup, they did that for me in April. Of course, the replacement mouse is now having the same issue. SOOO frustrating.

[@MCGR]

@@NBoone i fixed the one i cut the cable to and its my backup now that I fixed the scroll wheel

[@siddwitmusic477]

I temporarily retired this mouse and bought a cheaper one. But thanks to this video I can use my KAIN 200

[@memyselfandsteve4803]

Im having so much trouble with reassembly xd

[@banishbak813]

BRO TY. For people debating. Whether to do it or not JUST DO IT. It works. It’s big hard you just need to be careful. I’m not a pro at this stuff and it was easy and fast.

[@Pozer714]

This may fix "some" issues, not mine, all mine needed was a couple drops of 3 and 1 oil directly down the sides of the wheel, Just a couple drops! Works fine now! Mine had problems scrolling up and down, would stutter and scroll the opposite direction, sucked!

[@tedwoermer2218]

All I did was watch this video and mine started working properly again. 10/10

[@tubbsandtwigs]

Thank you, very detailed procedure, the mouse is fully functional again.

[@Wavefire_]

Thank you so much! It actually worked! The scroll wheel glitch was driving me crazy haha

[@KarenTookTheKids]

Great to hear it works again 😊

[@introdesignz3505]

thanks for this video, it works perfektly with the aimo 202, but keep danger you need a "Y" Screwdriver for the first 4 screws!

[@zabdi4772]

Very helpful tutorial, sadly my LEDs do not work anymore, but I can live with that. I really appreciate it and you deserve a sub man!

[@jgbelmont]

Thank you. My mouse wheel was stiff and canted. This helped me fix it.

[@JuMaKre]

nice video, probably would've helped me if my mouse wheel isnt broken, like actually there is just a part that is broken, anyway thanks

[@Fabiol31]

Thank you ! I got an RMA for the kain aimo 200. So the second mouse give me the same scroll problem after one month. It was finally easy to fix.

[@Bhshdlitxpjvitcuv]

I wish I could fix my side button it randomly just doesn’t work half of the times I click it

[@n3o2k1]

Thx KAREN. Really fixed it...

[@GiraffeStalker]

It worked! Thank you very much. Popping the scroll wheel out from the PCB was much harder than it looked in the video

[@tiktv9087]

My shell button doesn't seem to work now as it is always on if I assemble, do you know the fix for this?

[@PascalDickhoff]

I got the wireless version and just did all you did. My pins werent even bent, but I cleaned it anyways and added a little wd40 (jut by touching with a soaked paper, not spraying on to it and IT WORKED (for now :D lets see if it stays this way)! THANK YOU

[@Azizgang]

hello bendikt tubes, i tried this and sadly it didnt work, in fact it made my middle button stop clicking, the scrolling is semi better??? need help asap thank you,

[@assassine.brotherhood9536]

Do I need new pads ?

[@camilo-wm8sh]

At first I thought its a troll

[@KarenTookTheKids]

You think thats funny huh? Just because my name is karen, im so gonna speak to your manager

[@Chotukc007]

Just open the mouse and pour 2-3 drops of oil on the spinny wheel. Fixed it thrice for me and worked every time on my cheap Ant GM200 gaming mouse in last 2 years.

[@orensk3763]

what, really?

[@Chotukc007]

@@orensk3763 yes just blow off any leftover dust and pour two/three drops of coconut oil and close the mouse and let it sit for an hour or two. The wheel problem should be fixed, works for me everytime.

[@orensk3763]

@@Chotukc007 cheers man

[@gammabird]

Thank you very much for this usefull guide. It worked very well but it will be my last device from roccat - the design is incredibly stupid and they changed the screws to make it harder...

[@PixelZYX]

Thank you:) i was pretty wreckles but i still fixed it and now it works perfectly (and i didnt use alchohol but it still works)

[@pradrew]

fixed my kain 122 aimo. thank u very much, it works

[@mateobaysse5586]

Worked perfectly, you are my saviour

[@remioverwatch1236]

Worked properly for me thank you But if you pins are not bent as he shows dont panic and do the same

[@michellecastaldini3446]

Thank you bro your a good man lmao Edit: I ruined my mouse slides but it’s fine

[@manodedios27]

Thank you this saved my Kain before a new mouse :)

[@DELIRIOUZ]

Dammit. At 8:45 after placing the scroll wheel back in its crooked. Looks like it's not pushed all the way in and it's slanted to the left. While I was fumbling with it the wires ripped off the wire contacts you mentioned 8:11! So I'm basically screwed now right? Or can I solder the wire back on to the contacts with no problem?

[@KarenTookTheKids]

You would need to be very good at soldering, definitely not a beginners task

[@bri-ux9kc]

@@KarenTookTheKids i had the same problem can i buy that part or..?

[@tothbenedek1541]

OMG it's working in my kain 120 THANK YOU!!!

[@thenickfoxx]

Thank you! I think my sensor was just dirty. But much appreciated!

[@Henry_Playz7]

Thank you so much bro it works now idk why its not working my my mouse but thank you so much for help m me this video is the best thank you for helping

[@bmwgang7611]

Appreciate your video, was able to completely restore my mouse!

[@Mahteye]

This video saved 80 bucks, thank you!

[@hexagun.]

i just removed some dust and it worked for me

[@flyingfox_1111]

very good. it works. my son is happy again :) thank you so much

[@KUR4R4]

Thk you its work for me ! i fix my roccat kain 200 aimo . great tutorial tks again

[@simmerthemdown]

design is flawed. I have the kain 120 AIMO. Just wanted to share that there was excessive grease or lubricant in mine. I wiped some, but not all of it and it fixed the issue mostly but I didn't wipe enough I guess. It's just noticeablly better now. I saw there was a light amount in the video but mine had a lot more. The lubricant is probably to stop the contact from getting caught and folding like what happened in this video. But I guess too much also causes the issue of Acting glitchy.

[@infanatic]

that worked like a charm. thank you!

[@nathfay]

Could someone provide me with the link to purchase another sensor for the little wheel? Or a sensor that is compatible, as long as it is already soldered with the wires?

[@alcos3284]

Ripped 3 wires by accident and completely broke my scroll wheel, good video though I prolly should've thought that the 120 and 100 would have different insides lmao Edit: damn it, I broke the LEDs aswell.

[@KarenTookTheKids]

aw man thats not great to hear

[@KarenTookTheKids]

actually the inside of the 120 and 100 is pretty much the same

[@alcos3284]

@@KarenTookTheKids The blue piece thats connected to the wheel on the inside has a different metal plate surrounding it, also I think 2 extra scews

[@Disabler]

THIS MAN IS A HERO

[@jeffordchoy3797]

I actully fixed my scrool wheel.But somehow my rgb stopped wroking. Anyways you deserve a sub

[@MCGR]

i went through roccat to get a replacement mouse and I had to cut the cable but ya know me having like 20 broken mice ofc i have a spare so ima try this

[@acid3129]

they are useless i have been a fan for ages but they destroyed my trust in them when they told me they wont help because the store i got it from has closed down and i cant get it returned ... they use faulty parts to make the mice then dont give a shit when they fail and pass the blame

[@MCGR]

@@acid3129 they replaced my mouse no hassle so idk

[@wynn7623]

Worked pretty well, it's basically a new mouse, so fcking nice

[@baluk188]

Thx it worked my roccat kain 200 works properly

[@wojas1519]

love u thx, unfortunatly i cant click scroll any more but its not that bad like cant scrolling

[@sabbi2896]

Worked great ! Thanks dude :D

[@fuzzbuzz6581]

I will have to see if this works lol sadly after frustration with my scroll wheel I have handled it pretty roughly. Probably broke some plastic supports...

[@ramyarstar]

OMG, You saved my life dude. thank you very much. i do really appreciate it

[@ramyarstar]

Now I am not afraid of scrolling :) :)

[@yodahulk1813]

worked np. to get it off mine i would have had to solder it but i couldnt do that but i stil was able to fix it.

[@i-kwebdevghz]

Thanks, worked like a charm.

[@KarenTookTheKids]

That's great to hear👍

[@6spxc317]

@@KarenTookTheKids why are u not being a Karen

[@KarenTookTheKids]

@@6spxc317 of course you would say that you offensive piece. Im gonna speak to you manager RIGHT now

[@IvanOrendarets-so4rd]

My mouse stopped working after this “helping video”. The cords just broke.

[@radiotbo4646]

Tks you saved me!!!!

[@ViveLaChocolatine]

fonctionne je viens de le faire sur ma petite souris version 100 la petite molette et blanche sur la mienne pas bleu, je me suis tuer les doigts par contre... on verra si ça tient 2 3 ou 6 mois...

[@jgbelmont]

Where did you get the special too for the proprietary screws?

[@pootnannies]

thank you man! i used contact cleaner and wd40 and it wasn't working. thankfully i found this vid and bent those pins and it works now! liked and subscribed

[@pootnannies]

had to fix the mouse again. freakin' roccat. this was a replacement for an RMA and they don't renew the warranty. that's twice i had to fix the mousewheel on this very same unit. i hope they fix this for future designs.

[@liebertmusic]

I used sharp stick and pulled out hair and it worked

[@hulmeag]

Thanks this fix my mouse.

[@oktolopus420]

sadly did not work for me, now my mouse does not connect to my pc anymore.

[@rockstar_2417]

RIP to people who unscrewed the mouse and ruined something lol

[@eelifnbr]

noooooooooooo i broke my scroll wheel wire fuc k

[@bukisantv1392]

I like how this thing has 70 likes and 0 dislikes lmao. Thanks for making the video i dont know what i would do if i didnt find this video

[@darek4488]

You had to mess it up didn't you?

[@bobbyboygaming2157]

It also worked for me! But the scroll wheel lost the clicky-step feel. but I dont care

[@semi9650]

actually worked 😊

[@marianoramirezgisbert6099]

Hmmm... Not very easy as some technical skills are needed and a very good sight. The pieces are tiny! By putting the scroll box I accidentally broke a cable. So it didn't work out for me or I wasn't skilled enough.

[@Kittyface-zz6uk]

WELL i wish i had found this video 6 months ago before i threw away my kain cuz its scroll wheel was being weird

[@IAmDek]

I try this tutorial and after fixing my scroll button dont clicking when i connect mouse to end

[@burrito5181]

Thank you very much, my mouse wheel is now working how it should again. But I have a question... how long does it take till it´s broken again?

[@KarenTookTheKids]

Mine is working since 6 months now no problem whatsoever

[@burrito5181]

@@KarenTookTheKids mine is repaired since a week and it seems to start glitching again. But its not that often so i guess it´s okay. Any guesses why? It could be that i didnt bend the metal thingies right or sth. Thank u anyways

[@KarenTookTheKids]

@@burrito5181 it's probably because roccat chose cheap and low quality sensors ond encoders

[@Jacobulous]

I think a screw is loose inside my mouse but im to afraid to open it so I might just get a new one lul

[@KarenTookTheKids]

Dot be aftaid, it aint that hard to open

[@lean___]

Thanks it worked

[@glitchedhen4605]

Do not recommend I tried this and my mouse went frictionless and not working anymore help ?

[@bradley4011]

Thank you KAREN 🙄

[@KarenTookTheKids]

Ahem thats offensive! Delete this comment immediately or i will talk to KZbin's manager and get your Channel terminated

[@mjzudba801]

@@KarenTookTheKids you're getting framed for vehicular manslaughter, karen. i guess at this point all you could do is throw tantrums and eat aphrodisiacs, you're gonna need them. watch out for the flying reptiles too, they once chewed my great-aunt Mrs. Fanny Apple's face off...

[@Iii-zf7bg]

Wie heißt dein Schraubenzieher

[@SalasGSM]

THanks bro worked for me

[@HitcH55]

Thank you so much!!!!!

[@cashka88]

Thank you. Working now

[@unverdaut]

sadly broke my contacts. A new mouse is on it's way!

[@zyanchuah]

can i speak to the manager of this mouse company- oh wait

[@KarenTookTheKids]

Dont worry i already did

[@mjhvjuyfjyfjyfjckjgkuygkuy5897]

is there any way to fic this bug without having to take the mouse apart?

[@bobbyboygaming2157]

Too bad the mouse comes with a Titan Switch but a Dwarf scroll wheel