How To Fix The Pioneer DDJ Rev 7 DJ Controller platters (Repair Fast Spinning Platter) Step By Step

[@DiskJockeyRisk]

Thanks for this. My Rev7 is in good shape for now, but at least I know what to do if I have issues.

[@djmatthew123]

Good info bro....thanks for all of your tech support..really appreciate it...👍🏽

[@DHONGORDY95]

THANKS FOR THE INFO BRO

[@DJROCKCEEENTERTAINMENT]

Any time!

[@AllX_CN]

OMG I very need this video one year ago 😂. I did it myself without any instructions. Actually don’t need take out all platter. Just need take of two screen weirs and remove screen, after can take this white plastic ring. And clean

[@DjkopoeNYCSensation]

I need your help

[@AllX_CN]

@@DjkopoeNYCSensation watsup

[@DjkopoeNYCSensation]

@@AllX_CN Rev 7 Left Jog Wheel I Brought Some Air Compressor I just need my Machine to work it work fine yesterday on my Live stream

[@AllX_CN]

@@DjkopoeNYCSensation air compressor didn’t help. Need open it.

[@AllX_CN]

@@DjkopoeNYCSensation I need know what your problem. Have two problems: 1. You jog few seconds work normally, after go reverse, go straight, reverse again. It’s mean optic has problems maybe some dirty stuff there, maybe some beer or something like that. Need open all and clean. 2. If one jog work normal but not very smooth. Need fallow video which I sent to you. Clean and back. Two bid white rings inside should be very dry without any oil. Two small gray rings can put a little oil. I used “dioxid fader” for this, just couple drops. Good luck. Actually if you know how to work with screwdriver, it’s easy.

[@djsergiubulgar4922]

You are 💪

[@DjTecniq]

Great clip. I find this extremely interesting though cause some users have this same issue with brand new units out the box…so is the issue really smoke or dirty sensors?

[@baconpantswaffleton9892]

I just got my rev 7 in Thursday, used it for about 15 hours. No "hooka" shit or whatever lame excuse this dude is making. This thing right out of the box is fucked.

[@Realdeejaybon]

Depending on where you bought the unit that shit just might be a second hand device meaning that someone used it in one of those clubs and collected all that hooka dust 😂​@baconpantswaffleton9892

[@stuntman3513]

Yes i 🎉

[@roymoxley2587]

So now pioneer needs to send this issue to there engineers to remedy this from happening Funny technics 1200 never had a issue with smoke

[@thedjnamedves]

Your favourite DJ's favourite tech support!

[@DjLyRiX]

Have you seen my R7 slip rings I make?

[@bboymac84]

Or just get the rane performer 🤷🏾‍♂️🤣

[@lituationwashington9200]

We’re are you located I don’t feel safe doing it on my own

[@tonysilva6847]

My Rev7 platters are pretty stiff when spinning backwards, like one full turn. Will this help my issue? thank you

[@guambalati]

ditto. did u ever find a fix?

[@djgeenlightlive]

How to recalibrate if you don’t mark them before removing

[@er6890]

Yo I put mines back together and the platter freezes when I press play like it starts for a second then gets stuck to the magnet. You try to spin it but the magnet tries to hold the platter in place. I think I messed up during installation. Nothing is damaged. That ever happen to you?

[@guambalati]

Goin through the same thing right now. Did u ever find a fix?

[@djloomy]

This is a shame and cannot be tolerated for a 2000 euro controller. This is a Pioneer manufacturing fault, sooner or later all rev 7s will fail, Pioneer should make a new jog wheel system and make replacement of the jogs completely free for rev 7 owners.