How to Fix Totally Not Working Mouse or sometimes Get Connected/Disconnected Mouse

You can fix / repair your totally not working Mouse by this method.
If you don't have soldering Iron: • How to repair/fix faul...
Tools and Equipment:
------------------------------------------------
1. Any Kind of USB Data Cable
2. Screwdriver
3. Soldering Iron
Working Process:
-----------------------------------------------
1. Unscrew and Open The Mouse
2. Using soldering iron Remove The USB Cable from Circuit Board Of The Mouse.
3. Before Do That keep the connection and 4 Wire Color of the Cable Note.
4. Now collect a USB Cable. Like Mobile Data Cable, Printer Data cable etc.
5. Prepare the USB cable for Solder with Board.
6. Solder Those 4 Cable and Reset The Mouse. Now your Mouse ready for Work.
If any Problem leave comment. I will try to give Answer.
..........................................................................................................
If your Mouse has left click, right click, double click problem or any kind of click problem then see my other video To get 100% solution:
• right / left mouse but...
• how to repair mouse le...
Subscribe And Like My Channel To Get More Video.

[@nigelxheri]

It worked!! You can also do it by cutting the existing wire and conect it with the data cable. Note> some old mouses have an other uncolored wire ,conect it with the aluminium foil that is inside the data cable(beetwen the colored wires and the plastic data wire cover(only on some data cables)_). Also do not forget to clean the sensor if the mouse is not working properly ,there are many videos in You Tube about it.

[@worldwidetechnology5146]

True, thank you for share informations.

[@that1shortguy186]

Lol i slamed my mouse on its side and it started to work again 😂

[@TwoWheelDee]

Lol

[@Simon-ue6ly]

Dude OMGGC

[@Simon-ue6ly]

I try to smash on my bed and the light start work OMGGG

[@Simon-ue6ly]

Thanks brooo

[@Simon-ue6ly]

I'm crying 2 month no pc gaming 😂 pls Cs come to Me baby

[@ankurrathi2314]

My mouse started working while i was watching this video automatically, i am not kidding

[@worldwidetechnology5146]

Coool

[@worldwidetechnology5146]

🐁🔫

[@bifur66]

Same thing happend something with my mouse cable happend I leggit just looked at the vid for a sec and it started working again

[@steepdeej]

Hmmm. I am on mobile but will try this

[@citizen1115]

Yes 😱😱 mine also... Why it is so.. Something strange 🤔🤔

[@arupdutta2202]

My mouse ran away seeing the video.

[@iiyxtr2164]

My mouse died after slamming it to the wall

[@divyeshvadhavanadevanshicr7301]

Hi

[@businessguyold7999]

Yeah, I think I’ll just get a new one instead...

[@ammar1fq]

damm right

[@joaobruh9996]

Fr lmao,its gonna cost more to buy a solder than it is to buy something like a logistics mouse

[@reimon5410]

Did this for free lol. If you already have an soldering iron and the other shit then its worth a shot.

[@alexstilldraws]

Same

[@graverising6941]

Thank you so much i didnt do exactly what you said but it still worked thank you

[@worldwidetechnology5146]

you're welcome

[@kevincastillo4897]

@NoFlyies i doubt u know how to talk

[@wpatrickw2012]

Once you have the cover off, before disconnecting the cable from the board, maybe use a voltmeter to check if the cable is bad or just the connection. Maybe one of the leads needs to be re-soldered?

[@worldwidetechnology5146]

You are right. But cable change is more easy than check and repair the cable.

[@gavinsoh3595]

omg i just dropped my mouse and it exploded i freaked out and tryed to find a new one but there isnt any so i search how to fix and it work oml im so happy

[@worldwidetechnology5146]

Good job👍

[@saimasalarabbas1344]

Lol

[@brackcycle9056]

can be a break in the mouses tail where it comes out the mouse, so you just need to shorten it.

[@zetormatic]

It works, mine was ligting but not working, this is solution.

[@chidanandabhuyanpatia7174]

Yes bro same with me

[@polyester9785]

oh...but yes your way is the correct way..i just meant if someone couldn't or didn't want to soldier..You did a very good job.

[@Skirtdab]

Try flipping it over and over again because the electrons can't get through as good as when it is tangled up works all the time for me, and once done right don't do very very very jerky and sudden moves because that will simply disconnect it because the censor cannot pick it up hopefully this helps you and have a nice day!

[@Oxinesty]

so my wired mouse takes a while to finally respond and it will work until it just stops and wont turn on and when it stops working the red light on the bottom just slickers or just turns off please help me

[@worldwidetechnology5146]

Change the cable

[@khokh699]

my mouse projects light but does not work can you help me

[@worldwidetechnology5146]

yeah you can fix your mouse by this method. Apply this method. change the cable. you can use any usb data cable as mouse cable.

[@tanmengfong4554]

My mouse too

[@audigamerkingofthieves3588]

for me is mouse recognises pc but pc doesnt recognise mouse

[@khalifaalsuwaidi1470]

same

[@annsmith7413]

Mine 2

[@ashandtaffygaming6848]

my mouse shorts out like sometimes it does light then boom no more light and not working

[@worldwidetechnology5146]

Apply my videos method. I hope your problem will be solve

[@pritikagurung4521]

Ash and Taffy gaming same

[@okipullup128]

SAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAME

[@worldwidetechnology5146]

Watch this who don't have soldering iron kzbin.info/www/bejne/o53Ppoave8qCfJI

[@Myllo_yousef]

whats that thing that you use to burn the wires?

[@RaviKumar-it7oe]

My mouse doesn't work. Red light of my mouse work only when i shake the wire . Tell me what is problem

[@worldwidetechnology5146]

You have to replace the cable. To do it, You need any kind of spare USB dada cable. Just watch this tutorial video. Do you have soldering iron?

[@anonymoususer9053]

But I didn't has soldering machine to fix it.😞😞

[@user-dh9eq1es2y]

same

[@tulibro]

i opened my logitech mouse to fix the click switches, but when i reassembled it, it doesnt turn on anymore, tried in a diferent computer, tried to open it again but everything seems well connected, any ideas what happened? thanks

[@worldwidetechnology5146]

kzbin.info/www/bejne/hmnSZZalo7Sdhqs see at 4:20 of this links video. May be you have to move the water color plastic things direction.

[@himanisingh7276]

Same happened with me Earlier my mouse worked well just scroll wheel didn't so I opened and cleaned it and reassembled but now the light doesn't even glow, any idea what to do?

[@himanisingh7276]

Same happened with me Earlier my mouse worked well just scroll wheel didn't so I opened and cleaned it and reassembled but now the light doesn't even glow, any idea what to do?

[@himanisingh7276]

Same happened with me Earlier my mouse worked well just scroll wheel didn't so I opened and cleaned it and reassembled but now the light doesn't even glow, any idea what to do?

[@pradametro3911]

yo i clicked on the video and my mouse reconnected thats tufffff

[@theplanneron83]

do we need an non usb cable?

[@k4it1yn3]

My mouse broke because the front snapped off and we dont have any money to buy another one.. what should I do please reply ???

[@worldwidetechnology5146]

Can u send me the pics of broke area in my email [e-mail]

[@donstroke]

I don't have the stuff through which u were removing those red and all wires what should I do?

[@worldwidetechnology5146]

Cut the 4 wires keeping one inches wire with main board to joint manually with new cable.

[@renai3930]

so most of the time its the cable making it not to work?

[@worldwidetechnology5146]

Yes

[@thanasisgizas4716]

what can i do if i don't have the hot iron thing

[@worldwidetechnology5146]

U can cut old wires keeping 1 inches with main board. Then joint old cables rest of wires with new data cables wires.

[@auramendez6053]

So my mouse is the one with the harddrive to use but when i connect it it suppose to turn green but iut doesnt. And it doesnt move. :(

[@worldwidetechnology5146]

you can try this videos method. i hope it will work for you.

[@auramendez6053]

Worldwide Technology ok I will!

[@iheb4898]

@@auramendez6053 did it

[@lolo-gv3nl]

when i left click my mouse the red light cuts off when i let go it lights but if i right click the light dont cut off and its not working its saying not recognized any help

[@worldwidetechnology5146]

You have to change the cable

[@lolo-gv3nl]

@@worldwidetechnology5146 thanks there is also a cylindrical magnet around he wire should i remove it

[@worldwidetechnology5146]

@@lolo-gv3nl the cylindrical carbon are not important. You can remove that.

[@INDIANGAMEINGCHANNEL-wo3ru]

I dont have solidering iron

[@cjderes1289]

Stick glue

[@worldwidetechnology5146]

Watch my another video, how to do it without soldering iron kzbin.info/www/bejne/o53Ppoave8qCfJI

[@vincent2491]

Lol all I did was disconnect and reconnect mines I don't know I did it but I AM A GOD DAM GENIUS

[@mcwattle5621]

worked for me as well

[@roaringwitch7972]

my mouse can move up and down correctly and really accurate but when i try and move it left to right it just chooses to stay there and not move. is there a fix for this?

[@worldwidetechnology5146]

you can try different mouse pad

[@Music-su5ph]

I am just 15 years old and I don’t want to do that lol I will buy a new one

[@techmaster6638]

I have the same PCB every single number is matching with your PCB. I change cable with new one but it doesn't work led dont glow. I followed your all steps. I have the same PCB that you have in this video. Please help me

[@worldwidetechnology5146]

Maybe there problem with your mainboard. You cant fix mainboard.

[@TechsumitX]

can anyone tell what he did at 1:17 and where can i buy that?

[@worldwidetechnology5146]

I used soldering iron. You buy It from any electric shop.

[@TechsumitX]

@@worldwidetechnology5146 is this available on amazon

[@worldwidetechnology5146]

@@TechsumitX Yes, its available

[@TechsumitX]

@@worldwidetechnology5146 ok can u add link in description..

[@redonfetahu]

i have diffrent mouse problem. when i click 1st time a thing it doesnt work. also when i click vid. when i click it soooooo hard it works. how to fix it???? im annoyed!!

[@redonfetahu]

also when i press ''coment' is impossible for me ;-;

[@worldwidetechnology5146]

Watch my other videos about how to fix click problem.

[@redonfetahu]

@@worldwidetechnology5146 XD i smashed my mouse bc i was raging it not work. i did just smash it and is fixed xddd

[@omutto789]

I have a wireless mouse and i bought new battery but the light keep blinking wut to do

[@worldwidetechnology5146]

What is the problem of your mouse?

[@omutto789]

@@worldwidetechnology5146 it keep flashing the blue light that shows when it on so i bought a new battery and it worked for a solid 30 mins the blinks again then just cant turn on again

[@sinichikudo7235]

my mouse has definetly not the problem because my mouse is working fine when i plug it in other usb ports. This one specific port when i plug my mouse in the laser below mouse is turning on. but the mouse is not functioning . But the red light is on can you help me

[@worldwidetechnology5146]

Is this mouse functioning in other ports?

[@sinichikudo7235]

@@worldwidetechnology5146 yes it is functioning

[@worldwidetechnology5146]

@@sinichikudo7235 well, first you have to sure about the specific port that the port is working. Plug any usb device (like keyboard, pendrive etc) in the port, to check the port. Then let me know the reasult to know next step

[@sinichikudo7235]

@@worldwidetechnology5146 tihs specific port only wired mouse and keybaord doesnt work ,, but my wireless mouse/keyboard is working.. also any pendrive work as well

[@worldwidetechnology5146]

@@sinichikudo7235 ok, if you want you can change the cable of the mouse. Do it simply, cut the cable from middle or around the usb jack of the mouse cable and joint (4 wire) it with hand to another spare usb cable.

[@hawkeye7856]

yes , i just saved a bunch of money on my mouse insurance

[@worldwidetechnology5146]

Good job

[@carreliicastillo8949]

I need help my mouse sensor is gone even tho it's still plug

[@worldwidetechnology5146]

Apply this methode

[@chandrashekhardan9928]

What about 4 or 5 button mouse?

[@worldwidetechnology5146]

Same Method.

[@sandeepmahawar8930]

Watch fixing n Talking channel if you wanna fix mouse professionally they all are kids

[@Sx7QuickSilver]

I need help, my mouse works ok (thats a lie, its bad), but now and then the cursor just stops and i have to give it a small slam to get it to work again. Pls help

[@worldwidetechnology5146]

Change the data cable of the mouse.

[@Meme-ge3lb]

You have cellphone. Take a picture to make it easy bro.

[@worldwidetechnology5146]

Picture of what?

[@SMSCLM765]

My orange small cable is cut, can I replace it with another one?

[@worldwidetechnology5146]

yes you can change. follow this method

[@Ali-yar]

how do you know its the cable,what if its the board???😔

[@worldwidetechnology5146]

Most of the time (around 95%) a running Mouse gets problem for it's cable.

[@gefflores8587]

My Problem to my Mouse: Sometimes, i get sounds like i disconnect the usb optical mouse but i didn't and sometimes, it gets sound reconnected but im not doing anything. Is that a cable of mouse is the problem? Automatically Abnormal

[@worldwidetechnology5146]

Yes, cable problem

[@sauravchaudhary9310]

@@worldwidetechnology5146 hey bro, I've 5 connections what to do now ? (Seems like them 4 connect to single one black coloured)

[@אלעדאלון-ז2ע]

I just left the connection to the usb port a little bit out and it started working bahah

[@worldwidetechnology5146]

good job

[@LiljamezZz]

I wasn’t ready for this

[@reianvertudazo69]

I know this is old video but how can i know which color to insert in the chip? I have orange blue green white

[@worldwidetechnology5146]

What is written above the circuit board? Orange is v+, blue is ground, green is data+, white is data-. If u can show me a pic of the circuit board then I can tell you where have to joint what color.

[@reianvertudazo69]

It only has 4 letters which is G, C, D, and V. I don't know which is which.

[@worldwidetechnology5146]

Joint orange wire with "V" terminal, green with "D" terminal, white wire with "C" terminal and blue wire with "G" terminal.

[@reianvertudazo69]

It works perfectly, thanks man!

[@worldwidetechnology5146]

You're welcome

[@ari5285]

My mouse still work but the thing is when I tried to open the chrome app it won't open. Same as the others it won't let me shut down.

[@worldwidetechnology5146]

Maybe you have to reinstall/reset your device operating system.

[@hidroshot5948]

Can I use a mobile charging cabel

[@worldwidetechnology5146]

yes

[@worldwidetechnology5146]

yes

[@jaywardhan_makwana]

Hey bro can any local electronic store do this ? i have no soldering iron ,that stone and metal peace

[@worldwidetechnology5146]

Yes any electronic product repair shop can do it. Just u have to say them to change the cable.

[@jaywardhan_makwana]

@@worldwidetechnology5146 Thank you. Subbing.

[@worldwidetechnology5146]

You're welcome👍

[@Ayush-vg7ml]

is there any alternatinve for your soldering... please reply

[@worldwidetechnology5146]

Yes i am trying to upload a video today about how to do it without soldering iron.

[@Ayush-vg7ml]

@@worldwidetechnology5146 please make it surely by today..

[@Ayush-vg7ml]

@@worldwidetechnology5146 can it be done with insulation tape or something easy, Actually my mouse light is on but it is not moving on pc Does it mean i had to change usb cable??? Plz reply...

[@chintamanikulkarni1787]

Perfect solution 👌👍🙏

[@worldwidetechnology5146]

Yes, thanks

[@BAPIEDITION2.0]

I have same mouse but colour black

[@Official415]

My mouse fell and it's working very slowly. I did everything that I researced. But it still working slow. It's a brookstone

[@worldwidetechnology5146]

Go to control panel then select mouse then set fast if you are using windows

[@Official415]

@@worldwidetechnology5146 I bought new one but it fell but it stop working g but tysm

[@koy4038]

whats the liquid u used for the soldering iron

[@Relaxplease367]

Soldering paste

[@pugcreate7216]

1:14 whats that thing called?

[@worldwidetechnology5146]

Soldering iron

[@sktalen5183]

U saved my ass from getting whooped

[@worldwidetechnology5146]

😅👍

[@IDMYM8]

How about the Logitec G102? It have 5 wires at the board. (Two black)

[@rooul786]

Thanks for sharing it, could you show how to repair thin client...............

[@worldwidetechnology5146]

welcome. I will do

[@psjones415]

kjjjjk

[@christoveli0322]

I have the same problem with controller. What can I do?

[@worldwidetechnology5146]

What problem?

[@christoveli0322]

@@worldwidetechnology5146 The controller is connected to pc but sometimes when I move the cabel , it's disconnected...

[@worldwidetechnology5146]

Well, just change the usb cable. Watch this video.

[@sohansarkar7148]

i dont have hot glue, i'll use cellotape instead... XD

[@worldwidetechnology5146]

Ok, did it work?

[@anudeepsimplecooking1242]

Mouse is not working.. but Lyt jal ri.. it measns current is dere.. now wht to do

[@worldwidetechnology5146]

No problem apply this method. and change the cable

[@thebad_god1272]

lol

[@niqabi_sista3537]

Hahahahhaha

[@ProbalyRich]

i tryed smacking my mouse for it can work but it didn't:(

[@polyester9785]

I just opened my mouse and tied a knot about half way between where the cord entered the mouse and the soldered wires were to position the cord in a different place where it left the mouse and was wearing due to movement.

[@davetoospooky9173]

WHY DOES IT HAVE TO BE THIS COMPLICATED

[@wildindoraptorhenry4770]

i hope that for the cables work if you has broken cable :O

[@worldwidetechnology5146]

yes

[@Relaxingmusic-ps9bd]

Damm, I can't do this cuz my mouse got a removable cable and I even used another cable and still didn't worked, I guess that after allmost 3 years the mouse port had his last competitive matches

[@worldwidetechnology5146]

What is the probem of the mouse?

[@Relaxingmusic-ps9bd]

@@worldwidetechnology5146 just doesn't work. It only turns blue the logo but the other leds remain off and it doesn't work, not on my pc, not on my phone, on nothing... not even the steelseries support is able to help me, they give me solutions that do not work and it takes them 3 days to respond (wich is kinda decent for a multi corporation )

[@worldwidetechnology5146]

@@Relaxingmusic-ps9bd apply this videos method. If u dont have soldering iron then watch my another video link are given description.

[@Unknown-qq5hm]

Help mouse buttons and scroll are working and the light is also turning on but cursor won't move. i took apart the mouse and with the board alone it works but when i place everything in to the mouse case it stop working again and the cursor also move when i use finger over the sensor.

[@worldwidetechnology5146]

Change the white things(under the sensor) direction

[@wh.portraitart]

what is that yellow stuff? is that a rock or something else? i see it in minute 3:03 until 3:14 ?

[@worldwidetechnology5146]

Soldering resin/flux. It just help for soldering. Its not important.

[@paramasivam6163]

I have saved the money

[@worldwidetechnology5146]

Good job👍

[@saifshah7824]

can i use iphone cable

[@worldwidetechnology5146]

Yes

[@himlexknight5108]

Bruh i was so mad my mouse didn’t work turns out my sensor at the bottom was dirty and cricked

[@nehan5178]

Listen carefully,my mouse has 5 wires--- red,green,yellow,and black these wires are connected to the board but there nothing written on it beside is a black wire these five wires are joined with a black normal wire and it has a ps2 port what should I do I have my pocket money to buy a new one but due to the pandemic of corona I can't buy it so please help me I have some projects given to me as work from home and it needs mouse please help me I need ur help😖😖😖

[@worldwidetechnology5146]

Do you want to change cable?

[@nehan5178]

@@worldwidetechnology5146 yes

[@worldwidetechnology5146]

What is the new wires color?

[@nehan5178]

Red black yellow green and other one is black so total 5

[@worldwidetechnology5146]

Joint 2 black wire together

[@mafiamaster5036]

Bro my mouse right click only not working other are working I have an another mouse button replace this right click but it is not working why how it's solve

[@varghesevm5080]

Super Thanks........☺☺☺☺

[@worldwidetechnology5146]

You're welcome

[@cafenatedfox1189]

My mouse dont respond when im connecting the cable the red light disapear can you please help me.

[@worldwidetechnology5146]

change the cable with this tutorial

[@cafenatedfox1189]

Hey I just fixed my mouse without changing the cable I don't have the tool that you use but I just use a glue stick,screwdriver,candle,and a cutter I just cut the damaged wire and reconect it and it works and thanks for the tutorial to do it!

[@worldwidetechnology5146]

Good job. Thanks

[@kriffecaesar1760]

No problem the video helped me alot

[@kiilee5963]

before your fingers looks like red on the top why ??

[@treasureteumes1539]

i accidently drop my mouse and its not workinhggggg😭😭😭😭😭😭😭😭

[@worldwidetechnology5146]

Sorry about that. Open the mouse cover and then reset again. It may fix if there have any loose connection.

[@cherrybleed920]

My mose's red light is on butt my mose vorks like 6 sek and then its not vorking again! Its mose vhidote tail! Or hamster

[@worldwidetechnology5146]

Apply this videos method. Replace the cable with any kind of new or old data cable.

[@hisokamorow218]

Bro i just slammed dunked my mouse on my knee and its fixed

[@worldwidetechnology5146]

wow

[@hisokamorow218]

@@worldwidetechnology5146 its been working perfectly fine now

[@YeetPeeter]

Boi I dont have a soldering iron at home wdym

[@worldwidetechnology5146]

Well, cut the 4 wire from the mouse circuit board, keeping like 1 inches wire on circuit board. Then joint new data cables 4 wire with circuit boards 4 wire by your hand and use any kind of insulating tape to keep the joints separate from each other.

[@NPictures]

100% working thank you bhai sab.. a lot of love from NEPAL

[@worldwidetechnology5146]

You're welcome

[@NPictures]

@@worldwidetechnology5146 apka fb id ka name kya hai

[@NPictures]

@@worldwidetechnology5146 aap kaha se ho

[@worldwidetechnology5146]

Bangladesh

[@worldwidetechnology5146]

facebook.com/julfikar.BD

[@foxom5176]

Mine has no screws, help?

[@worldwidetechnology5146]

Remove all kind of stickers even heel to dind out screws. If there are no screw then try to unlocke frames lock with flat screwdriver things

[@mustansirkhuzema319]

Can u pls help me. My problem is that my mouse sometime works and everything is ok but suddenly it stops working and don't work for sometime and after that suddenly it starts working and this happens. Could pls tell me what problem it is?

[@green-pk7go]

Maybe your USB is loose or your pop socket isn’t proper....

[@taransidhu5293]

Good

[@prabinaryal4462]

can you say which kind of usb wire ha.s 4 smaller wires.i dont have soldering iron s can i use feviquick😓😓.

[@worldwidetechnology5146]

Any kind of usb data cable have 4 wire. It does not work with feviquick. Soon i will upload video that how to do it without soldering iron.

[@prabinaryal4462]

bro can you tell the steps without soldering here also.i will try it myself

[@worldwidetechnology5146]

@@prabinaryal4462 cut the 4 wire from the mouse circuit board keeping like 1 inches wire on circuit board. Then joint new data cables 4 wire with circuit boards 4 wire by your hand and use any kind of insulating tape to keep the joints separate from each other.

[@prabinaryal4462]

Bro while doing as in video I already had taken old wire totally and have new USB cable ready😂😂😂

[@worldwidetechnology5146]

@@prabinaryal4462 😅

[@theriturajsingh7464]

Thanks bro 😊

[@worldwidetechnology5146]

You're welcome 😊

[@cheesus3804]

maybe its time for a new mouse

[@amansingh-sg3ce]

bhai mera mouse ka usb cable change kerwaane gya tha toh dukaan waale ne kaha ki kaam nhi karega ?

[@worldwidetechnology5146]

It will work.

[@amansingh-sg3ce]

@@worldwidetechnology5146 bhai vo dukaan mein chaar dosto ke saath baitha thaa saayed isliye bola hoga Sala baith ke IPL dekh raha tha

[@worldwidetechnology5146]

@@amansingh-sg3ce maybe

[@theonlineninja4958]

light is on my mouse but not working

[@worldwidetechnology5146]

Change the cable, with this videos method

[@theonlineninja4958]

@@worldwidetechnology5146 that is quite risky

[@payden0_086]

All I did was unplug it and when ever I plug it back in it turns on for a second and goes back off how do I fix

[@IronDizaster]

The fix is the shop, ya need a new mouse mate

[@jeremiahbates7359]

Um ima just wait for my parents to buy me a new one lol

[@worldwidetechnology5146]

👍

[@amazingrandomperson3951]

When I plug in mine it doesn’t work period

[@worldwidetechnology5146]

Apply this videos method.

[@vireshrh]

Very Nice.

[@worldwidetechnology5146]

Thank you :)

[@tarunparashar4505]

And in the thumbnail u say....very easy

[@deniisu4003]

thw title tho , How to fix a TOTALLY not workin mouse

[@GreenFaceMT]

why intense music?

[@worldwidetechnology5146]

Its true the music is kinda intense. I added the music cause there was not voice in the video.

[@GreenFaceMT]

@@worldwidetechnology5146 instant reply (._.)

[@worldwidetechnology5146]

@@GreenFaceMT i like to reply :) do you have any problem of your mouse🐁?

[@emirujsag]

thanks

[@worldwidetechnology5146]

your welcome