How to FIX XIAOMI MI A1 not charging? Only $2

Рет қаралды 32,798

RoyTecTips

Күн бұрын

Пікірлер: 39

@VagnerFPanarello 4 жыл бұрын

Hello, Did you buy the USB Board with ICs or without ICs? There is some difference? Thanks,

@docolo 5 жыл бұрын

Wow... This repair is super easy and borad is really cheap.

@timsavvy 5 жыл бұрын

Hi! Good video! What's the size of the bottom screws. I lost them and want to know where I can buy. TIA! :)

@pvshka 4 жыл бұрын

0.8mm T5 screws. Or at least that's what this video said.

@shanksAMVsGaming 4 жыл бұрын

Actually even T2 is too big. A P2 bit fits perfectly fine.

@akilanav 4 жыл бұрын

What is difference between with ic and without ic board ? I have no idea which one buy ? Please suggest

@VagnerFPanarello 4 жыл бұрын

Did you find the answer? I would like to know too. But I think the ICs are important for normal functionalities from device. The board without ICs you should somehow the ICs from old board solder over the new one. On the Video he had changed a board with ICs to a board without ICs. Very strange..

@akilanav 4 жыл бұрын

@@VagnerFPanarello Don't buy without ic board i have bought in local market for ₹150. Problems : 1. Mi A1 ( charging pad is attached with headphone jack connector ), so audio is worst to the core can't even imaginable. Zero bass. 2. After 2 days charging pad not working.

@kumarprabha5285 5 жыл бұрын

Bro the board working properly all component charging port , 3.5mm jack , network

@MsOZ79 5 жыл бұрын

nice video, thanks. I have almost the same issue with my Xiomi MI A2 lite. wont charge battery with the led light blinking....any idea? is it the same problem as your A1? thanks

@MsOZ79 5 жыл бұрын

@Peixoto3021 try fast boot couple of times, and keep charging it with original charger for sometimes it may work for you. Did for me!!

@nasrularif9570 4 жыл бұрын

I faced an issue where I cannot turn on my Xiaomi Mi A1, when attempted, the LED only blinks. Charging also make it blinks. The way that I fix this is by opening the back of the phone, remove the battery cable connected to the motherboard, then connect charger (powerbank also work). After that, while the charging cable still connected, plug in back the battery cable onto the motherboard. Try to turn the phone on to check if it works. It may takes several attempt, 3 times for me at least. Just be careful when handling with the battery cable, when I was attempting to fix it, there was a spark but fortunately nothing was damaged.

@MsOZ79 4 жыл бұрын

Thanks a lot for answering.

@romaodidrep29 4 жыл бұрын

Veo que en la otra placa que instalarte no tiene algunos componentes. Eso es normal ?

@nuss60 3 жыл бұрын

Thank you, I will do it, it's so easy....

@adamled99 5 жыл бұрын

can you show a battery replacement? don't know if I can get official batteries.

@DeepakSharma-rp6nt 4 жыл бұрын

how to fix backlights problem it is not working after change this board

@RoyTecTips 4 жыл бұрын

Use the original see what happen . I don't face any backlight problem after changing the board.

@jorge.altamiranda 4 жыл бұрын

hi! after change that board i lost the wifi. You losed it too?

@RoyTecTips 4 жыл бұрын

no , you did not connect the wifi antenna

@jorge.altamiranda 4 жыл бұрын

@@RoyTecTips thanks!

@saurabhbharadwaj416 4 жыл бұрын

Network connection is too low bro please help

@jorge.altamiranda 4 жыл бұрын

@@saurabhbharadwaj416 my problem was I had not properly connected the antenna, then I disconnected it and reconnected, now everything is fine. Try it.