How To Fix Your Mushy GameCube Controller Buttons... (Easy Tutorial)

[@luisamaro6626]

Hey I got them, and I have to say, I really like it. Thanks for the video, probably wouldn’t have gotten them if I didn’t saw it

[@jrob0021]

Nice, yeah they've worked pretty well for me

[@itsmorphdaddy]

Thanks for the video. For anyone curious it definitely makes less mushy, perhaps a bit rigid though especially on the A button. Hopefully that wears in. Also noticed the D pad might not work with the ones on amazon without a lot of force, so you might want to keep your sticky one just in case.

[@Thewolfguys.cartoons2000]

6:00 how did you put the back plate on easy? mine wouldn't do it because the motherboard keeps popping out and if I press it too hard, I might break something so that's what I'm concerned 😟😕 edit: never mind, I found out that it was the vibrating thingy in the middle that was facing the wrong way, no wonder it hasn't go in yet. thanks for the help, my buttons now sound clicky again when I bought the replace rubber button pads from Ebay 👍

[@LordVex47]

😂 you just answered my question about what that thingy was

[@bourkekarl6328]

Do you recommend a GameCube in 2021? I heard it has some disc rot

[@Trinnitus]

I got one yesterday and I say get one. It’s worth it in my opinion

[@guillermovalderrama6242]

You can always get a sd2sp2+swiss or a gcloader

[@Solontire]

Buy an original Wii for cheap and HomeBrew it. You can download all the GameCube games online and run them off an external hard drive. Same thing for Wii games, Atari, SNES, etc….

[@irodragon7184]

@@Solontire this is the way. Wiiflow as I'm too poor for a HDD but 64gb SD ain't bad

[@Solontire]

@@irodragon7184 Do you like WiiFlow? I upgraded all my stuff a while back from running through Nintendont and made the switch over to USBLOADERGX which I like because it looks nice and clean with the artwork. I didn’t realize about WiiFlow until after I spent hours moving over to that UI and now I’m not sure if it’s worth the pain and effort to move stuff over to WiiFlow especially if everything is working on USBLGX at the moment. I always wanted to consolidate everything down to one SD card or an external hard drive, but same thing as above I don’t want to mess with what is already working for me in case I mess something up.

[@feblesp1]

Will these silicone button pads work for the powera wireless? I just need to fix my mushy b button and I can’t find any pads for this specific controller

[@LordVex47]

Is the projecting disc looking thing a battery or heatsink or? In the middle of the board under the wire

[@LoverTerminator]

I’m pretty sure those are weights that spin to make it rumble lol

[@bumblessb]

that's the rumble. those two wires attached to it are very fragile so if they snap your rumble is gonna be messed up lol

[@jeffbode7854]

thank you for this video you saved my controller

[@djhunt9828]

Awesome just what I was looking for!

[@yoshq7]

worked for me when other videos didn't

[@Ocarinist_Drew]

What would one do if the L/R button pads keep falling out whenever you press the trigger all the way down?

[@cer6969]

Hello i like your video can you suggest a link that i can buy original replacement parts for the c stick and joystick for nintendo gamecube controller also do you know a link to buy parts for nintendo gamecube switch controller i want to buy a button pad

[@lowberistfs]

hey can i ask in ds4 layout its have L1, in the gamecube controller what button fof L1 ? when i play Fifa Street 2 in dolphin i use ds4 but not find L1 button for mapping. I CAN'T JUGGLING like in pcsx2 press L1 it's juggling

[@micahcouve9331]

Hey @Jacob R! Can you please make a video on how to make Xbox 360 controller buttons clicky again? My controllers are not functioning like they used to.

[@skyzert2516]

TYSM, my triggers were not going down at all and you helped me at 5:30 sub for you

[@lnn8654]

The only "clickbait" I accept

[@ThadeadMFKZ6]

Hey so my Z button feels jammed does this help also?

[@JacobRTWO]

It should, but I would open up your controller first and just clean it out. There may be some dirt that's causing the z button to jam

[@ThadeadMFKZ6]

Well honestly I accidentally sat on my controller then boom it got jammed😂 😂 but ik for a fact the controller works

[@MrLinder]

My issue here is the z Button i can not get it back

[@retrogamingcritic3555]

Hey Nice video

[@atroquix]

my d-pad doesn’t seem to work now but everything else works perfectly fine

[@itsmorphdaddy]

Had the same problem, ended up just putting my pushy one back on and it worked fine.

[@DatCookJohn]

Nice

[@Huhhhhhhhhhhhhhhhhhhhhhhhh11]

Hi

[@JacobRTWO]

Hey

[@Ryke005]

You are using Third Party ControllerButtons....I'm Not sure

[@Zetchzie]

I like my mushy buttons i hate clicky ones lol

[@bumblebeealso]

psychopath

[@CarrotsNotCake]

They were never clicky.

[@tomalex6449]

cheaper to buy a new controller tbh

[@JacobRTWO]

Where are you finding a working OEM GameCube controller for $6??

[@bnr32jason]

No, it's not.

[@water_king1]

I’ve never seen a GameCube controller go for $6

[@francoportanova3591]

​@@JacobRTWOhi there I have a question are the replacement rubber pads are they just as good as the OEM ones or are they really cheap and will wear down even sooner than the original ones . Is it better to get a broken controller with good OEM rubber pads still intact or what should I do .

[@Poizon_SSBU]

@@JacobRTWO a really scuffed shell, wiggling stick, sticking triggers, and a chewed up cable, yeah definitely but it probably wont be good