Tap to unmute

How to Fuse Pipe with a McElroy TracStar® 618

  Рет қаралды 105,604

McElroy University

McElroy University

Күн бұрын

Пікірлер: 11
@bakedevvo
@bakedevvo 4 жыл бұрын
Taking a 20 inch course in a couple days. Thanks for the refresher
@patrol98traveller41
@patrol98traveller41 2 жыл бұрын
You have a part double bead on that weld in Australia we would cuts the weld and shave back and re do to make sure everything is perfect
@joshpope7127
@joshpope7127 6 жыл бұрын
Great video. Needed a refresher course.
@reinebruhn8649
@reinebruhn8649 4 жыл бұрын
Well done video, Thank you!
@luisquiroga4888
@luisquiroga4888 Жыл бұрын
No sir let me correct u. U don't stop instead u put it on neutral to make sure u leave no lips on the face but wat do I know I only been fusing for 12 yrs
@shelbysnake5003
@shelbysnake5003 11 ай бұрын
I noticed everyone on youtube fuses differently lol
@abdulkareemjasim4685
@abdulkareemjasim4685 8 жыл бұрын
عمل منتاز بشرتك مشترك مع شركة السندان الذهبي
@johnescrow10
@johnescrow10 5 жыл бұрын
Is it important to line the “seams” up to 10 o’clock and 2 o’clock? Or is that not important or practical?
@CharlieJulietSierra
@CharlieJulietSierra 5 жыл бұрын
Not necessary.
@tbonemc2118
@tbonemc2118 5 жыл бұрын
Why isn't the heater plate mounted on the same rail as the planer? Manually taking the heater plate in and out of the machine guarantees damaging the Teflon coating in a fraction of the time besides it getting dirtier all the time on the ground. If the machine opened up another 100mm there'd be room for a fittings chuck and make the machine more capable for use as a clamping device for ef. I'm guessing there isn't enough room inside the carriages to accommodate flange faces of long spigot stubs once you get out near the o.d. limit of the machine. A simple lock mechanism would have been great for single sided planning and a cam arrangement for pipe alignment on the fixed carriage. What's the lowest SDR rating pipe at the maximum od limit the machine can handle and how much flex is there? From a contractors point of view this machine would be disappointing A) because you've spent so much to buy it and it's not got a fully automatic welding cycle with the operator only feeding in pipe o.d. and wall thickness B) You'd need a cheap second machine to perform the welds this couldn't do.
@CRAIG_CHRIST
@CRAIG_CHRIST 5 жыл бұрын
why do people think being able to hear your nose whistle and saliva noises sound professional? move the dam mic away from your face ffs.
How to Fuse Large Diameter Polyethylene Pipes with McElroy Fusion Machines
15:28
How to Fuse Pipe with the McElroy TracStar 500 Series 3
9:12
McElroy University
Рет қаралды 80 М.
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Cómo Fusionar Tubería con una McElroy TracStar® 618 *
10:53
McElroy University
Рет қаралды 71 М.
How to Fuse Pipe with the McElroy DynaMc® HP (Hand Pump)
10:15
McElroy University
Рет қаралды 98 М.
McElroy Made E2 - The TracStar® iSeries
15:08
McElroy Manufacturing
Рет қаралды 1,1 М.
Jackman Fusion 2" IPS - 6" DIPS Butt Fusion Machine Demonstration
5:03
How to Fuse Pipe with the McElroy 2LC
7:48
McElroy University
Рет қаралды 185 М.
ISCO Insights: Basics of Butt Fusion
1:00:21
ISCO
Рет қаралды 2,4 М.
ISCO puts McElroy's Talon 2000 to Work
2:58
ISCO
Рет қаралды 16 М.
How to Fuse Pipe with the McElroy Pit Bull® 14
8:06
McElroy University
Рет қаралды 55 М.
500 TON HYDRAULIC PRESS VS VERY HARD OBJECTS
9:02
Crazy Hydraulic Press
Рет қаралды 4,3 МЛН