HOW TO GET SPEKTRUM FORWARD PROGRAMMING SPECIAL TIP HOW TO MUST HAVE

[@jonknust9784]

No one else has explained this to me so straightforwardly. Thanks!

[@erickczech1656]

Thank you for this video! You have certainly answered my question as to why I could not find the forward programing function on my DX 8 Gen 2. transmitter.

[@txkflier]

I actually like reprogramming the AR636 and have no trouble getting them to do what I want them to do. It was FlightEngr on RC Groups who figured out how to reprogram them and provided the software that we use. It is a little easier to set up the Smart AS3X/SAFE receivers with Forward Programming, but a person still needs to understand how a gyro works.

[@dennishallman7783]

Are older 636a and 636b capable to forward programing

[@txkflier]

@@dennishallman7783 None of the AR636’s support Forward Programming..

[@ItAintMeBabe99]

Please make a video explaining each page and what they mean in Telemetry.

[@RubyS.1]

I had no idea the dx9 would do it. Got one used couple years ago just left it on the shelf until I saw this video. Had to register and update the dx9 but it works 👍thanks so much. I have quite a few rxs from bnf planes laying around you probably saved me few hundred bucks.

[@GRIFFINRCPLANES]

That is the whole point of my you tube venture. Glad that helped

[@alexanderstoner4306]

Ah, perhaps why I’m pulling my hair out. It’s a newly purchased DX6e, will that make that menu forward programmable. I don’t want to loose my new A-10 due to something stupid on my part.

[@alexanderstoner4306]

Can you update with an SD card or BT only? Not seeing a USB. Oh this radio chews through AA batts, is there a better way you’d recommend. Thanks for any help in advice. The manual & horizon vids either omit stuff like make an account, get the individual specific code🤨, gyro modes and SAFE off, etc. it’s clear an hurricane.

[@plugtheheliflyer]

Thank you for doing this Video . I have a NX8 I thought I was losing the plot I couldn't see in my radio forward programming. Now you have explained it why I don't see it .I can remain sain as I possibly can 😁

[@capnhardway]

I have the older gen 1 . I was able to bind it to my aeroscout which is the rtf version. I was able to get safe to work, still unclear on expo settings on different rates as far as sensitivity. Your videos always informative!

[@txkflier]

On the AeroScout, the expo and rates are set up in the receiver by Horizon.

[@kway7583]

Another useful video, Thanks Sean.

[@marc5297]

Thanks for an interesting and informative vid. I am new to Spektrum and have been using aftermarket recievers but recently purchased an AR630 for a new build. It was worrying when I couldn't find Forward Programming on my DX7 while I was reading up on how it worked before installation. The instructions weren't clear that it had to be bound and on before the F P menu showed in the main menu. Your explanation cleared my confusion. Thank you. 😊

[@dennishallman7783]

Are older 636a and 636b compatible to forward programming? Do you have a video on how to do forward programming . Step by step. Thanks

[@GRIFFINRCPLANES]

I do have several forward programming videos. HOWEVER THE AR636 does not use forward programming it can only be custom programmed by using the AS3X PROGRAM APP OR THE PROGRAMMER ON A COMPUTER

[@josephpekcl3474]

Does the spektrum dx6e not able to do forward programming?? I'm losing my mind after updating both the radio and the receiver (ar631). Can't figure out what I'm doing wrong.

[@c70char]

Same here. Have you found anything?

[@JmartinCraig]

Great vid! Helped me navigate my new NX-8 You are awesome!

[@cubflyer1]

Thoroughly enjoyed your NX six transmitter help, I just upgraded to a NX eight, I wish you would add comments for higher channel radios in your NX six videos

[@user-rx8qq8sk9ydv1ce5ib]

Thanks Sean.. Amazing video as always 👌

[@mauriceartiles3968]

My issue I’m having is my dx6 g2 won’t read a single sd card I have. Not sure what else I can do? Any help

[@DavidBall-r9i]

Thank you for your vids New to spektrum NX10 and all is a great help.

[@landondial5215]

Im trying to help my old man. He just bought an Apprentice STS. He has a NX8 transmitter and a Spektrun A3230 Flight Controller. The plane is bind and Forward programing shows up but when you select it it says “Connection Failed” I could really use some help. He just wants to put the plane in safe mode. The transmitter is up to date

[@pavlosconstantinou9236]

I have a DX18 G2 fully updated to the v2.11 . I see the forward programming option. I try to do it with a fully updated AR636A to v2.30. Still i get failed communication. any tips ? do I need to have servos connected ? 636 is supposed to be ablt for forwards programming.

[@mikegarrett6309]

It seems like my DX8e will have forward programming. Not sure if I need to update it or it will be there once I'm bound to my 8063T receiver. We'll see when it gets here. Thanks for good videos, keep it up.

[@jamesfarriss]

Thank you for the video

[@mikegarrett6309]

Show us how to setup Safe Select please. I have the DX18 and a AR8360T receiver. Can't figure it out!

[@DronemanJoeRc]

Can you answer me a question?? when you are setting up your transmitter and when it comes to aircraft type one wing and one aileron screen or other options, on the wing type screen and then you click down next and it shows that screen and it shows to activate 3 position gimble should you in that screen activate it that on the new receiver setup or not and just leave it alone? and then when you click down on that screen it asks what type of picture you want for your aircraft. you know what Im saying bud? Id like to know if I should set the 3 axis gimble to active on that screen on a plug and play receiver?

[@rz-hi8ou]

nxx10 up to date except for the last update (20 channel ). AR636B receiver up to date bind complete nx10 shows fwd program shows connecting then connection failed any ideas why fail

[@7T1Vette]

How about how to program AS3X settings to any plane...thanks

[@Ace-dh5lz]

I have Dx6e and ar630 and forward programming wont show up at all

[@AlpineCorpus]

Same boat haha

[@c70char]

​@@AlpineCorpussame here

[@AlpineCorpus]

@@c70char I got it to work by updating the firmware to one of the older builds, I think 2.07, then it popped up when I bound my 630

[@mastaajbomb]

Same here just bought them new and updated the dx6e. No forward programming

[@c70char]

Good News!! turns out version 2.10 doesnt work, but reverting back to 2.9 makes itwork@@mastaajbomb

[@krisbommersbach3776]

My Aeroscout rtf has ar631. I just got a dx6 gen2 and updated it to 2.08. Whenever I follow directions to bind it with safe and reverse the aux1 channel, I get 2 different safe modes to the switch I set for gear channel (B) but I can’t get safe to turn off and I have almost zero elevator. If I switch aux1 back to the same as other switches in reverse menu, I gut full elevator travel but no safe and only as3x. When I hold panic button with aux1 reversed, it turns safe off and has only as3x active. I try enter forward programming and it says connection failed. Any suggestions? I’ve been trying to figure this out for over a week now.

[@jcb6713]

👍👍

[@deanchiuppi5384]

I have an nx8 and sport cub with ar636. When I select forward programming it says connection failed. Help please

[@landondial5215]

Did you ever figure it out? I’m really need help it’s doing it to me.

[@v-grooves8531]

You did not talk at all about how to program one of these receivers. I guess this video was intended for something else?

[@milesonewheelwinter]

Jesus Christ brother get to the point LOL. That was a long video I think it was about five minutes longer than it needed to be.

[@elmomylo]

My gosh, we don't need a history lesson, get to the info man.

[@neilbarclay7070]

8 minutes of utter garbage rabble to get to a 4 second simple explanation

[@BubbaB43]

Damn, was somebody holding a gun to your head making you watch the whole 8 minutes? I could have swore there was a fast forward and next button here on KZbin 🤔. I think it's hilarious when I see grown ass men crying about something so petty. Notice your the only one complaining about the video, that should be your first clue who the real problem is here!

[@___Aaron___]

If you unlock your ar637ta then you get forward programming. But the open stock ar637t is unlocked from factory and forward programming is available..