How to guide: Removing a Smart 451 Door panel

[@the_blurst_of_times5246]

As a locksmith I do this kind of a thing for a living and use tutorial videos when I get into a jam. This is a great guide! Thanks for making this awesome video!

[@davemunk]

You're very welcome.

[@stephenmatthews7877]

This video was extremely helpful thanks. Good that you edited it so it does not have all the drivel so many videos have you got straight to the point and good text guides. One thing. I was working out side and the temp was very low. The door panel would not go back on so I took it in doors to warm up which worked I believe it had contracted in the cold.

[@alm7707]

The bolts were loose on the bottom hinge of mine. This video helped a lot and I was able to tighten the bottom hinge. The hinge bolts are t45. I never took the door handle off. mine has 2 cables because of power locks? and I just left it hanging. The mirror was electric so I unplugged the wire. Some of those bolts are T25. Great helpful video, thanks davemunk

[@tonysampson724]

Thank you for making getting panal off pretty easy.fiddly replacing the panal,but job jobbed.Thanks again

[@klausbellroth5451]

Great video! I didn't think it would be so complicated to replace the bloody speakers. At least now I know which tools I'm going to need and perhaps even what I'm doing ;).

[@jasondizon5215]

I will show this to my mechanic. my driver side window lifter is broken. thanks to this video.it doesn't seem to be complicated.

[@smarte.r.1450]

Sir. Thank you. You made that very calm. Relaxed. And clear. I will try and replicate this but I used your exact directions to get access to the door hinge bolts which became loose. Bravo. I salute and humbly thank you

[@alm7707]

my bolts were loose too!

[@Masterloxz]

Great, clear instructions, thank you

[@rob5944]

Thanks for that, just had to replace the mirror housing, passenger L/H here in the U.K. :)

[@manuelfigueroa539]

Muchas gracias amigo, saludos desde Cancún, México.

[@maximusrexlohse1063]

great video, clear voice and very nice instructions, great job mate :D thank you so much!

[@susanmello5722]

very clear wonderful video. Any chance you want to show, putting things back together? I can't get door panel to reconnect to top connectors

[@mlcportland2206]

Thanks for the great video! You saved me from breaking the clips for sure. Very informative, cheers!

[@J1a9m8e3ss]

Very helpful Dave wel explained and clearly spoken top job now I can get those crap standard speakers out and new ones in ;)

[@glenngarrett]

Which new speakers did you go for?

[@rogerhudson9732]

How about adding some Dynamat inside the door panel?

[@zarnas10]

Great video thenks for the help

[@alexsanchez8971]

THANKS, GREAT VIDEO!

[@Alpha_Betz]

I have a 2009 Fortwo 451 and don’t need to remove anything in the hole after the two torx screws for handle.

[@aslio1]

Very clear ! Thanks a lot ;-)

[@ezequielcosta954]

Thanks Man!👍

[@SunsetfearOFFICIAL]

how do i wrap up a door panel in cloth

[@MyronJackson]

Great Video. THX

[@MrMr123]

Thanks for the video playboy 🫡 I’m going to swap out my speakers 🔊

[@TimHart74]

Saved me a bunch of money from having the body shop replace my window. Thank you.

[@scaraus1]

I would suggest, to spray some wd40 on parts that are difficult to remove, as for the plastic rivet for the locker, the easy way to remove it is to remove the central pin first with a knife, then the rivet outer part comes out easy. However my car is a 451 but had no locker screw inside.

[@leevirasanen5343]

Good video!

[@kuete1000]

Tanks is helping me

[@DirectorNVL]

I need to replace not the door panel, but the front side panel in front of the passenger door.

[@tisrealflat5955]

Can any one tell me how to remove the inner door handle on the passenger side please ? Mine is loose at the top near the electric window switch so im looking to fix it back on, but cant see any clips or screw holes. Im assuming the fastening must be under the main part of the triangular shaped part of the handle. Any help in how and which way to lever this off would be appreciated thanks or do i need to remove door skin to access the interior door handle

[@Yakee.]

Ty man!!

[@L.G19]

Спасибо 👍👏👏

[@gkouretas]

Thank You !!!!

[@marcoorsini9157]

great!, thank you man

[@iamclaus]

And... how to get it back on?

[@MrPenabh]

VALEU! OBRIGADO.

[@Dg-zj6jo]

all that mirror work for the door card

[@timford4873]

Brill video would have bust loads of stuff if not watched ..Cheers dave

[@diovik]

grazie friend!

[@zavalondc]

Great video! But in cold places doesn’t work! Have to warm the plastic before do anything... with the first try it just shattered in undred pieces!!! 😂😂😂

[@pabloukr]

Спасибо, очень хороший материал.

[@davecrouch44]

Enjoyed your very informative video. Are you going to post some more Smart Car videos. If you are I will subscribe.

[@Alpha_Betz]

But where is the screw inside the hole? I can’t find it for the life of me🤷🏽‍♂️

top

[@grenho70]

Jt 0u